Enjuku Racing - ISR Performance Auto To Manual Clutch Line *$35.99* - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Enjuku Racing · 02-19-2016, 03:47 PM

ISR Performance Auto To Manual Conversion Clutch Line - Nissan 240sx 89-98
In Stock and Ready to Ship!
*$35.99*

ISR Performance Steel braided clutch line with CNC machined fittings. Clutch lines are 52" in length. For converting your 240sx from automatic to manual transmission.

The ISIS Performance clutch line utilizes a seperate fitting from the line so you don't need to keep twisting the line to install it, you just install the fitting and then the line. This is a much better deisgn than some of the other lines out there.

ISR Performance clutch lines are made of the finest PTFE hose and permanently crimped-on zinc plated steel fittings. Our hose is made with an extruded PTFE core and a stainless steel wire braided cover. They reduce volumetric expansion giving you the reliability and safety you demand.

Overtime and under continuous use OEM rubber lines can swell and expand causing failure. The rubber cover is also vulnerable to attacks from the ozone layer rubber which causes it to deteriorate. In extreme applications (Auto X, racing, hard driving) rubber hoses might be susceptible to flying debris. Stainless steel lines will give protection from theses issues along with enhancing the appearance of your installation.

For added protection against abrasion and corrosion this line utilizes a Yellow PVC outer cover.

Please note you do not need the smaller clutch line with this setup. This runs from Master Cylinder all the way to Slave.

02-19-2016, 03:47 PM	#1
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 37 Posts: 3,045 Trader Rating: (29) Feedback Score: 29 reviews	Enjuku Racing - ISR Performance Auto To Manual Clutch Line $35.99 *ISR Performance Auto To Manual Conversion Clutch Line - Nissan 240sx 89-98* In Stock and Ready to Ship! *$35.99* ISR Performance Steel braided clutch line with CNC machined fittings. Clutch lines are 52" in length. For converting your 240sx from automatic to manual transmission. The ISIS Performance clutch line utilizes a seperate fitting from the line so you don't need to keep twisting the line to install it, you just install the fitting and then the line. This is a much better deisgn than some of the other lines out there. ISR Performance clutch lines are made of the finest PTFE hose and permanently crimped-on zinc plated steel fittings. Our hose is made with an extruded PTFE core and a stainless steel wire braided cover. They reduce volumetric expansion giving you the reliability and safety you demand. Overtime and under continuous use OEM rubber lines can swell and expand causing failure. The rubber cover is also vulnerable to attacks from the ozone layer rubber which causes it to deteriorate. In extreme applications (Auto X, racing, hard driving) rubber hoses might be susceptible to flying debris. Stainless steel lines will give protection from theses issues along with enhancing the appearance of your installation. For added protection against abrasion and corrosion this line utilizes a Yellow PVC outer cover. Please note you do not need the smaller clutch line with this setup. This runs from Master Cylinder all the way to Slave. __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode