GT3076R for RB25DET - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gostrider · 03-05-2016, 07:48 PM

good info here

rbpwrd240 · 03-05-2016, 08:20 PM

Glad everyone is still interested. I finally found a .86 6 bolt Nissan exhaust housing with Syko elbow for my install. I need some new studs for where the elbow and housing meet. Looks like they are M10X1.25.

Gunna snag some off eBay unless someone can give me an ARP Part number.

Thanks,
Alex R.

RB25GUY · 03-10-2016, 06:40 AM

Quote:

Originally Posted by rbpwrd240

Glad everyone is still interested. I finally found a .86 6 bolt Nissan exhaust housing with Syko elbow for my install. I need some new studs for where the elbow and housing meet. Looks like they are M10X1.25.

Gunna snag some off eBay unless someone can give me an ARP Part number.

Thanks,
Alex R.

Wait .86 ar back housing is for t2 and im most positive that it will not fit over the 3076r wheel....

Sforteen · 03-10-2016, 09:21 AM

i made 420whp @ 18ish psi with Gt3076 with 1.0 divided T4 turbine housing.. Stock ports, cams springs etc. with greddy knock off intake..

I revved it to 7500, great turbo and response... sounded awesome too. could have easily made more with a bit more boost.

gostrider · 03-10-2016, 10:44 AM

So whats all needed for the GT3076 to work on rb s14? is it bolt on with no clearance issues? how do i need to mod the mani for the WG to work? or what WG do i use?

RB25GUY · 03-10-2016, 10:57 AM

Quote:

Originally Posted by gostrider

So whats all needed for the GT3076 to work on rb s14? is it bolt on with no clearance issues? how do i need to mod the mani for the WG to work? or what WG do i use?

I had a 40mm jgspt wastegate mounted near the flange closer to 4-5 cyl on the manifold i used a spacer to clear compressor housing so it didnt hit and had a downpipe made......made 400whp on 23 psi with a .63 ar housing

BigKriss · 03-10-2016, 11:10 AM

BigKriss · 03-10-2016, 11:13 AM

GT3076R on std RB25 manifold with Tial wastegate.

RB25GUY · 03-10-2016, 11:17 AM

Quote:

Originally Posted by BigKriss

GT3076R on std RB25 manifold with Tial wastegate.

Thats right on the money!!!

BigKriss · 03-10-2016, 11:19 AM

rbpwrd240 · 03-10-2016, 12:16 PM

WOW all that looks so hot!!!!

My exhaust housing has already been on a 3076R so I know it will clear the wheel. And this housing was only offered in Australia either in a .86 or .82 6 bolt nissan flange.

Sforteen · 03-11-2016, 07:42 PM

picture of my old setup AFI manifold with Twin MVS 38mm gates

Lot different now, almost 400 more horsepower

03-05-2016, 07:48 PM	#31
gostrider Zilvia Addict Join Date: Feb 2012 Location: CFL Age: 8 Posts: 638 Trader Rating: (7) Feedback Score: 7 reviews	good info here __________________ *240 with illegal engine mod.*

03-10-2016, 10:44 AM	#35
gostrider Zilvia Addict Join Date: Feb 2012 Location: CFL Age: 8 Posts: 638 Trader Rating: (7) Feedback Score: 7 reviews	So whats all needed for the GT3076 to work on rb s14? is it bolt on with no clearance issues? how do i need to mod the mani for the WG to work? or what WG do i use? __________________ *240 with illegal engine mod.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-05-2016, 08:20 PM	#32
rbpwrd240 Zilvia FREAK! Join Date: Jun 2006 Location: San Antonio TEXAS Age: 35 Posts: 1,124 Trader Rating: (19) Feedback Score: 19 reviews	Glad everyone is still interested. I finally found a .86 6 bolt Nissan exhaust housing with Syko elbow for my install. I need some new studs for where the elbow and housing meet. Looks like they are M10X1.25. Gunna snag some off eBay unless someone can give me an ARP Part number. Thanks, Alex R.

03-10-2016, 09:21 AM	#34
Sforteen Zilvia Junkie Join Date: Nov 2010 Location: USA Posts: 333 Trader Rating: (0) Feedback Score: 0 reviews	i made 420whp @ 18ish psi with Gt3076 with 1.0 divided T4 turbine housing.. Stock ports, cams springs etc. with greddy knock off intake.. I revved it to 7500, great turbo and response... sounded awesome too. could have easily made more with a bit more boost.

03-10-2016, 11:10 AM	#37
BigKriss Leaky Injector Join Date: Dec 2012 Location: South Africa Posts: 141 Trader Rating: (0) Feedback Score: 0 reviews

03-10-2016, 11:13 AM	#38
BigKriss Leaky Injector Join Date: Dec 2012 Location: South Africa Posts: 141 Trader Rating: (0) Feedback Score: 0 reviews	GT3076R on std RB25 manifold with Tial wastegate.

03-10-2016, 11:19 AM	#40
BigKriss Leaky Injector Join Date: Dec 2012 Location: South Africa Posts: 141 Trader Rating: (0) Feedback Score: 0 reviews

03-10-2016, 12:16 PM	#41
rbpwrd240 Zilvia FREAK! Join Date: Jun 2006 Location: San Antonio TEXAS Age: 35 Posts: 1,124 Trader Rating: (19) Feedback Score: 19 reviews	WOW all that looks so hot!!!! My exhaust housing has already been on a 3076R so I know it will clear the wheel. And this housing was only offered in Australia either in a .86 or .82 6 bolt nissan flange.

03-11-2016, 07:42 PM	#42
Sforteen Zilvia Junkie Join Date: Nov 2010 Location: USA Posts: 333 Trader Rating: (0) Feedback Score: 0 reviews	picture of my old setup AFI manifold with Twin MVS 38mm gates Lot different now, almost 400 more horsepower