S13 moog k9509 ball joint too small for flca? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Cpreston · 10-11-2015, 03:09 PM

I just tried to replace my front ball joints and thought moog k9509 ball joints were the oem replacement but they fit much much too loose. I can literally rattle them around inside the control arm. Anyone else have this problem? Do I have a wrong ball joint or is the lca not oem?

wakdady · 10-11-2015, 07:21 PM

you probably have aftermarker LCA's to begin with.
The K9509 should fit completely snug on OEM S13 lower control arms. that, or you got the wrong part.

Cpreston · 10-11-2015, 08:07 PM

Quote:

Originally Posted by wakdady

you probably have aftermarker LCA's to begin with.
The K9509 should fit completely snug on OEM S13 lower control arms. that, or you got the wrong part.

Yeah I'm pretty sure its an aftermarket lca. I doubt they sent me 2 incorrect ball joints boxed in k9509 boxes. I'm gonna measure them tomorrow at work to make sure but I'll probably just end up buying new lcas with ball joints already installed.

Does anyone have any suggestions for lcas that come with bushings and ball joints already? I saw some on frsport for like $110, anyone else have the same ones?

wakdady · 10-11-2015, 08:22 PM

you might as well go with another set of aftermarket ones, they are pretty cheap and come with everything.

soundboy · 10-21-2015, 03:26 PM

I'd stick with oem and just replace the balljoints. Oem stuff is pretty durable vs some wing Wang stuff

*TheRealSy90* · 10-21-2015, 03:55 PM

New s13 flca's with balljoints are like 50 bucks at NAPA.

omgosh · 10-22-2015, 12:11 AM

Yeah why spend $60 on ball joints when you can spend $75 and get the two complete MOOG LCAs ?

supersayianjim · 06-16-2020, 09:20 AM

Bump, i have oem arms and have the same issue now

S14rebuild · 06-16-2020, 12:17 PM

Quote:

Originally Posted by supersayianjim

Bump, i have oem arms and have the same issue now

Yea 5 yr old tread bump...hope it solves your problem.....

10-11-2015, 03:09 PM	#1
Cpreston Join Date: May 2015 Location: Lake Havasu City, AZ Age: 29 Posts: 39 Trader Rating: (1) Feedback Score: 1 reviews	S13 moog k9509 ball joint too small for flca? I just tried to replace my front ball joints and thought moog k9509 ball joints were the oem replacement but they fit much much too loose. I can literally rattle them around inside the control arm. Anyone else have this problem? Do I have a wrong ball joint or is the lca not oem?

10-22-2015, 12:11 AM	#7
omgosh Zilvia Member Join Date: Mar 2005 Location: Tampa FL Posts: 210 Trader Rating: (0) Feedback Score: 0 reviews	Yeah why spend $60 on ball joints when you can spend $75 and get the two complete MOOG LCAs ? __________________

06-16-2020, 09:20 AM	#8
supersayianjim Nissanaholic! Join Date: Jan 2010 Location: location X Posts: 1,807 Trader Rating: (10) Feedback Score: 10 reviews	Bump, i have oem arms and have the same issue now __________________ http://www.240sxforums.com/forums/rb...ject-s-rb.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-11-2015, 07:21 PM	#2
wakdady Leaky Injector Join Date: Nov 2002 Posts: 93 Trader Rating: (0) Feedback Score: 0 reviews	you probably have aftermarker LCA's to begin with. The K9509 should fit completely snug on OEM S13 lower control arms. that, or you got the wrong part.

10-11-2015, 08:22 PM	#4
wakdady Leaky Injector Join Date: Nov 2002 Posts: 93 Trader Rating: (0) Feedback Score: 0 reviews	you might as well go with another set of aftermarket ones, they are pretty cheap and come with everything.

10-21-2015, 03:26 PM	#5
soundboy Zilvia Junkie Join Date: Aug 2013 Location: trinidad Age: 41 Posts: 320 Trader Rating: (0) Feedback Score: 0 reviews	I'd stick with oem and just replace the balljoints. Oem stuff is pretty durable vs some wing Wang stuff