1st time swap - Should I buy a HKS equipped clip? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

AuburnRyan · 06-27-2005, 10:46 AM

Ok - Iv'e found a very good deal on a clip with lots of aftermarket goodies including aftermarket radiator, Fuel rail, top mount HKS T04 (don't know which one), FMIC, internals (don't know what), etc....

Now my question is:

This is my 3rd s13 I'll swap it into, so I know alot about the car - but this is my first swap. I don't want to melt piston's or boost a 5k RPM's... could I swap the turbo for a BB t28, keep the rest - ie. bigger injectors? If I kept all - would it reuire expensive tuning, or shall I assume the Japan owned had tuned.

Needs to be a daily driver more than race car - is this a good chioce, even if I sell some parts I may not want (i.e. the turbo).

Thanks - sorry for the NEWB question - please don't reply with "you kill yourself" etc. JUst want to have an idea if it's streetable.

aa87 · 06-27-2005, 12:09 PM

You could assume the owner ran it hard too, if its a good deal though, why not.

Sil Beer S13 · 06-27-2005, 01:03 PM

just swap it and drive done

TheSparo · 06-27-2005, 01:28 PM

even if it was tuned in japan, the fuel map will be different b/c of the octane difference, but have you seen the motor run at all? do you know the compression? just simple things like that can make the choice a lot more simple... make sure you know about everything that is in there... a t04 is a decent sized turbo

97DubTruck · 06-27-2005, 01:30 PM

Yeah that motor has been worked over pretty hard. Id say dont do it if you want a street car. I mean this will be a 400hp+ street car you have to understand and you will break more shit than a stock swap. But if you get a good deal then go for it....but be prepared.

sr240mike · 06-27-2005, 05:43 PM

Hopefully the owner in Japan just finished the motor build, took the car out the first day, and wrapped it around a telephone pole. Otherwise, its probably pretty beaten.

97DubTruck · 06-27-2005, 11:00 PM

Quote:

Originally Posted by sr240mike

Hopefully the owner in Japan just finished the motor build, took the car out the first day, and wrapped it around a telephone pole. Otherwise, its probably pretty beaten.

I mean what are the chances. Go for it. Whats the compression?

Yoshi · 06-27-2005, 11:53 PM

Quote:

Originally Posted by sr240mike

Hopefully the owner in Japan just finished the motor build, took the car out the first day, and wrapped it around a telephone pole. Otherwise, its probably pretty beaten.

My thoughts exactly.
if you do get it, take a look at the clutch, it should give you (hopefully) an indication of what was done, but ya... given what it has, it's probably been run pretty hard... otherwise why wouldn't the owner keep some of that stuff?

drift freaq · 06-27-2005, 11:59 PM

most likely if it was built it was run hard I would stay away from it. Ideally the swap you want should be a stock low mileage SR . You are safer that way. Upgrade parts are cool, but seriously, unless the builder crashed it right after he built that engine has been thrashed most likely.

AuburnRyan · 06-28-2005, 09:49 AM

Thanks for input -

I'm checking compression...and the engine was to have new internals 4k kilometers ago...need to check details. Engine has low km - about 36km or 24k miles. s13 Blacktop

Hard to pass up if it checks out- about the cost of regular clip, but has Radiator, FMIC, bigger turbo, etc...but like everyone says - I don't want a headache.

420sx · 06-28-2005, 09:59 AM

you have a dilema that is similar to..........

well, the girl you like is hot but shes such a slut whore. shes being a village bicycle for a long time. even your mom best friend fucked her. but hey, shes still hot, right? you know that she being USED alot. around the block quite a few times. but hey, she got nice tan, great legs, bit tata's, cute smile and gold teeth. hahaha, you know it wont last long

streetfame · 06-28-2005, 02:26 PM

Quote:

Originally Posted by AuburnRyan

Ok - Iv'e found a very good deal on a clip with lots of aftermarket goodies including aftermarket radiator, Fuel rail, top mount HKS T04 (don't know which one), FMIC, internals (don't know what), etc....

Now my question is:

This is my 3rd s13 I'll swap it into, so I know alot about the car - but this is my first swap. I don't want to melt piston's or boost a 5k RPM's... could I swap the turbo for a BB t28, keep the rest - ie. bigger injectors? If I kept all - would it reuire expensive tuning, or shall I assume the Japan owned had tuned.

Needs to be a daily driver more than race car - is this a good chioce, even if I sell some parts I may not want (i.e. the turbo).

Thanks - sorry for the NEWB question - please don't reply with "you kill yourself" etc. JUst want to have an idea if it's streetable.

i had the same dilemna when swapping a 'spoon' fed motor into my old crx. i could never get it tuned right and it needed all kinds of new stuff but the clip was cheap. i would go with the stock clip and if really want all that stuff later than just hit the importer up later on and swap your stock parts to that old clip and pay a little extra for that hks stuff.

06-27-2005, 10:46 AM	#1
AuburnRyan Zilvia Member Join Date: Aug 2002 Location: Northern VA Posts: 272 Trader Rating: (0) Feedback Score: 0 reviews	1st time swap - Should I buy a HKS equipped clip? Ok - Iv'e found a very good deal on a clip with lots of aftermarket goodies including aftermarket radiator, Fuel rail, top mount HKS T04 (don't know which one), FMIC, internals (don't know what), etc.... Now my question is: This is my 3rd s13 I'll swap it into, so I know alot about the car - but this is my first swap. I don't want to melt piston's or boost a 5k RPM's... could I swap the turbo for a BB t28, keep the rest - ie. bigger injectors? If I kept all - would it reuire expensive tuning, or shall I assume the Japan owned had tuned. Needs to be a daily driver more than race car - is this a good chioce, even if I sell some parts I may not want (i.e. the turbo). Thanks - sorry for the NEWB question - please don't reply with "you kill yourself" etc. JUst want to have an idea if it's streetable. __________________ '93 Fastback LE - Wrecked '91 Fastback HICAS and LSD - Sold '93 Fastback SE - Current

06-27-2005, 01:28 PM	#4
TheSparo Zilvia FREAK! Join Date: Sep 2002 Location: Athens/Chattanooga/ Cookeville/Morristown, TN Age: 36 Posts: 1,141 Trader Rating: (0) Feedback Score: 0 reviews	even if it was tuned in japan, the fuel map will be different b/c of the octane difference, but have you seen the motor run at all? do you know the compression? just simple things like that can make the choice a lot more simple... make sure you know about everything that is in there... a t04 is a decent sized turbo __________________ 89 240 SR powered... ummm i promise its stock

06-27-2005, 05:43 PM	#6
sr240mike Zilvia FREAK! Join Date: Apr 2004 Location: California, Norcal biiaatch Posts: 1,185 Trader Rating: (0) Feedback Score: 0 reviews	Hopefully the owner in Japan just finished the motor build, took the car out the first day, and wrapped it around a telephone pole. Otherwise, its probably pretty beaten. __________________ TWO IN THE COOT, ONE IN THE POOT

06-27-2005, 11:59 PM	#9
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	most likely if it was built it was run hard I would stay away from it. Ideally the swap you want should be a stock low mileage SR . You are safer that way. Upgrade parts are cool, but seriously, unless the builder crashed it right after he built that engine has been thrashed most likely. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

06-28-2005, 09:49 AM	#10
AuburnRyan Zilvia Member Join Date: Aug 2002 Location: Northern VA Posts: 272 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for input - I'm checking compression...and the engine was to have new internals 4k kilometers ago...need to check details. Engine has low km - about 36km or 24k miles. s13 Blacktop Hard to pass up if it checks out- about the cost of regular clip, but has Radiator, FMIC, bigger turbo, etc...but like everyone says - I don't want a headache. __________________ '93 Fastback LE - Wrecked '91 Fastback HICAS and LSD - Sold '93 Fastback SE - Current

06-27-2005, 12:09 PM	#2
aa87 Zilvia FREAK! Join Date: May 2003 Location: Shreveport, LA Age: 33 Posts: 1,116 Trader Rating: (1) Feedback Score: 1 reviews	You could assume the owner ran it hard too, if its a good deal though, why not.

06-27-2005, 01:03 PM	#3
Sil Beer S13 Zilvia FREAK! Join Date: Jul 2003 Location: Chino!...NOT CHINO HILLS! Age: 39 Posts: 1,117 Trader Rating: (0) Feedback Score: 0 reviews	just swap it and drive done

06-27-2005, 01:30 PM	#5
97DubTruck Zilvia Junkie Join Date: Sep 2003 Location: location, location Posts: 532 Trader Rating: (0) Feedback Score: 0 reviews	Yeah that motor has been worked over pretty hard. Id say dont do it if you want a street car. I mean this will be a 400hp+ street car you have to understand and you will break more shit than a stock swap. But if you get a good deal then go for it....but be prepared.

06-28-2005, 09:59 AM	#11
420sx Post Whore! Join Date: Jun 2004 Location: Texas Age: 38 Posts: 3,960 Trader Rating: (0) Rides Gallery: 420sx Feedback Score: 0 reviews	you have a dilema that is similar to.......... well, the girl you like is hot but shes such a slut whore. shes being a village bicycle for a long time. even your mom best friend fucked her. but hey, shes still hot, right? you know that she being USED alot. around the block quite a few times. but hey, she got nice tan, great legs, bit tata's, cute smile and gold teeth. hahaha, you know it wont last long __________________ hydropgrahics! ls1...... Last edited by 420sx; 06-28-2005 at 10:17 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode