OkiDori17

Price quote for the AEM series 2 EMS shipped to 76542. I don't need the harness or the wideband. Also, does it come with all the sensors and IAT?

__________________
'92 240sx w/'93 SR Blacktop /// '94 RX7 FD3S /// '11 370z RIP

GSXRJJordan

I'm sure Jack can get you a PM shortly, but to answer your question, no the EMS itself does not come with the MAP or IAT sensors that people typically use to go speed density, since not everyone uses the same sensors.

The most common ones are the AEM 3.5bar MAP (reads up to 2.5bar boost, there's also a 5bar sensor, as well as all the GM 1bar/2bar/2.5bar/3bar MAP sensors) and the GM IAT (which is something like $25, super cheap).

I'm assuming you already have a wideband and could wire in the analog output from that to the AEM's WbO2 wire, then the only other thing you might want to look at is fuel pressure with a 0-100psi fuel pressure sensor.

__________________


Jordan Innovations has a new web site!
www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

Souljahzs13

30-6601 price picked up

__________________

OkiDori17

Here's my situation, I bought a new harness from Wiring Specialties for the AEM EMS, not knowing the Series 2 is a plug and play unit. I'm mechanically savvy but wiring isn't my forte. I already have the AEM UEGO wideband and Truboost controller which I'll be installing. I just don't know what EMS I need to get (the Series 2 or the EMS4) along with the sensors I need to purchase to work with my harness. I spent a pretty penny on my harness and I would hate to have it not work. I'm just trying to find someone who can help me out with it.

__________________
'92 240sx w/'93 SR Blacktop /// '94 RX7 FD3S /// '11 370z RIP

GSXRJJordan

No problem, I assume Wiring Specialties gave you a standard SR harness? We just have to match up which connector it is (S13, early S14, mid S14, late S14, S15) with the correct AEM Series 2 EMS and you'll be able to use it, assuming the wideband is wired into the engine harness (if not, it's just one wire).

It sounds like a headache, but it's very doable, and with the pricing that we're giving on EMS's, an easy choice at this point.

__________________


Jordan Innovations has a new web site!
www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

OkiDori17

Since my last post I've been talking to a few SR gurus and I've figured out what all I need. The harness is a standard S13 harness, instead it's wired for the AIT and a MAP sensor instead of the MAF. I never received a PM about pricing, if I can get that it'd be great =)

__________________
'92 240sx w/'93 SR Blacktop /// '94 RX7 FD3S /// '11 370z RIP

Berzerker

30-6610 shipped to 60561

jordaninnovations

You two have pm

__________________

Nismo JLo

#30-6620 SHipped to 53150

AngryAgent

Price quote on 30-6051 please and I will pick it up depending on what your price is. Thanks

jordaninnovations

You both have pm

__________________

Lorenzo89

price for AEM EMS V2 for s13 rb20 shipped to 91766 or pick up?

jordaninnovations

you have pm

__________________

24Dsteez

Price quote for 30-6620. 53150

jordaninnovations

You have pm

__________________

kczopek

Sorry to bring this from the dead, but i just recenlty sarted looking in to that and was wondering is it worth it to buy the v2 or just the aem ems4. I have an s14 sr20 swap that i just finished but no tune so i have to get one or the other, i also heard of rsenthalpy but dont know much about it. I also might be doing a rb swap in the future but nothing is set in stone. thnaks