intake manifold - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

cloudloks · 01-12-2009, 11:22 PM

So one of my hoses is leaking coolant
from under the top part of the intake maifold.
I want to replace it my self since I'm dead broke
due to past mechanic labor.
I have 96 twincam ka24de.
I been searching but haven't found anything on how to remove
and install the manifold.I have the fsm but really doesn't show
a clear picture.is there any tread showing how to do this?
also is there anything i need to know before i start trying to messing with it.

10-66kruk · 01-12-2009, 11:38 PM

Its not too bad the only thing i remember is some of the towards the fire wall are a little fun getting back in and makes sure the egr tube is disconnected took me a few mins to realize thats what was holding it on still. Pretty easy though Make sure you scrape of old gaskets well though as lame as and straight forward as its sounds. But not to bad of a job. Good luck.

cloudloks · 01-13-2009, 02:11 PM

alright, could i still reuse the old gaskets and do i have to release the fuel pressure?
help me out here!!!

projectRDM · 01-13-2009, 03:20 PM

The paper gaskets always tear so go ahead and order new ones. Release fuel pressure before pulling the supply hose from the rail. Remove the two lower brackets that secure the plenum to the block and throw them away. Everything else is pretty self explanatory.

cloudloks · 01-14-2009, 01:31 AM

cool thxxx

01-12-2009, 11:22 PM	#1
cloudloks Zilvia Member Join Date: Dec 2008 Location: Maywood Age: 30 Posts: 154 Trader Rating: (4) Feedback Score: 4 reviews	intake manifold So one of my hoses is leaking coolant from under the top part of the intake maifold. I want to replace it my self since I'm dead broke due to past mechanic labor. I have 96 twincam ka24de. I been searching but haven't found anything on how to remove and install the manifold.I have the fsm but really doesn't show a clear picture.is there any tread showing how to do this? also is there anything i need to know before i start trying to messing with it.

01-13-2009, 03:20 PM	#4
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	The paper gaskets always tear so go ahead and order new ones. Release fuel pressure before pulling the supply hose from the rail. Remove the two lower brackets that secure the plenum to the block and throw them away. Everything else is pretty self explanatory. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-12-2009, 11:38 PM	#2
10-66kruk Leaky Injector Join Date: Oct 2006 Location: Lake Forest, Ca Age: 31 Posts: 148 Trader Rating: (4) Feedback Score: 4 reviews	Its not too bad the only thing i remember is some of the towards the fire wall are a little fun getting back in and makes sure the egr tube is disconnected took me a few mins to realize thats what was holding it on still. Pretty easy though Make sure you scrape of old gaskets well though as lame as and straight forward as its sounds. But not to bad of a job. Good luck.

01-13-2009, 02:11 PM	#3
cloudloks Zilvia Member Join Date: Dec 2008 Location: Maywood Age: 30 Posts: 154 Trader Rating: (4) Feedback Score: 4 reviews	alright, could i still reuse the old gaskets and do i have to release the fuel pressure? help me out here!!!

01-14-2009, 01:31 AM	#5
cloudloks Zilvia Member Join Date: Dec 2008 Location: Maywood Age: 30 Posts: 154 Trader Rating: (4) Feedback Score: 4 reviews	cool thxxx