Overheat sr20det - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

suplex57 · 07-18-2015, 09:03 PM

Guys guys guys guys...I have a issue. I installed clutch fan/shroud and put in a thermostat. All oem.

The issue is that the car still "says" its high in temp but it doesn't exactly boil over. I also don't let it get to H. And I have a stock temp gauge. I bleed the system and from my knowledge there shouldn't be no air in the system. What do you guys think it is???

Sent from my Nexus 6 using Tapatalk

jr_ss · 07-18-2015, 09:24 PM

What engine and what chassis?

suplex57 · 07-19-2015, 05:16 AM

Engine s13 red top sr. Chassis s14. I have this motor in the car for months. It just started doing this when I changed it the Fan and put back to oem

Marc Anthony · 07-19-2015, 06:03 AM

Make sure you swap the temperature sensor for the gauge cluster to one that matches whatever cluster you have in the car. So the original redtop one is not correct for S14.

suplex57 · 07-19-2015, 06:08 AM

I've had the motor in the var for months. It just started reading hot when I went back to stock cooling setup. But I am going to switch it anyway just to make sure

07-18-2015, 09:03 PM	#1
suplex57 Join Date: Sep 2014 Location: Miami Age: 28 Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	Overheat sr20det Guys guys guys guys...I have a issue. I installed clutch fan/shroud and put in a thermostat. All oem. The issue is that the car still "says" its high in temp but it doesn't exactly boil over. I also don't let it get to H. And I have a stock temp gauge. I bleed the system and from my knowledge there shouldn't be no air in the system. What do you guys think it is??? Sent from my Nexus 6 using Tapatalk

07-18-2015, 09:24 PM	#2
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,052 Trader Rating: (34) Feedback Score: 34 reviews	What engine and what chassis? __________________ My SR20VET

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-19-2015, 05:16 AM	#3
suplex57 Join Date: Sep 2014 Location: Miami Age: 28 Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	Engine s13 red top sr. Chassis s14. I have this motor in the car for months. It just started doing this when I changed it the Fan and put back to oem

07-19-2015, 06:03 AM	#4
Marc Anthony Zilvia Member Join Date: Nov 2011 Location: Yuma, AZ Age: 34 Posts: 186 Trader Rating: (2) Feedback Score: 2 reviews	Make sure you swap the temperature sensor for the gauge cluster to one that matches whatever cluster you have in the car. So the original redtop one is not correct for S14.

07-19-2015, 06:08 AM	#5
suplex57 Join Date: Sep 2014 Location: Miami Age: 28 Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	I've had the motor in the var for months. It just started reading hot when I went back to stock cooling setup. But I am going to switch it anyway just to make sure