Bench testing S14 cluster - speedo/tach signals - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

speedingmofa · 07-19-2019, 05:23 AM

Hey guys, what I want to do is to have any S14/S13 cluster tested on a test bench.

In particular the tach and speedo.
Now i want to have this tested, WITHOUT having to have all this connected in my car, or it wouldn't be called a test bench...

So how can I simulate these signals with minimal effort? I have no knowledge of arduino etc to build anything of the sort...

I do have a borrowed bitscope micro which can simulate a square 50% dc signal for the speedo, but it's not having it. The cluster is powered on (12V on ignition pin, ground on ground pin, water and fuel level work!), but it seems it's not having it...
Possibly, because the bitscope can only generate a voltage of 3.3V.
As for the tach, i was hoping a similar signal would work, tried all types, sine, square, triangle, different duty cycles, none seem to work. Again, possibly due to the bitscope only being able to generate 3.3V.

I've also tried a fan controller, which is 12V and sends out square PWM signals. Got it hooked up at the back... but it's not having it either! No movements whatsoever. Welp!

speedingmofa · 07-22-2019, 02:48 AM

Where the electronics experts at

speedingmofa · 07-31-2019, 06:33 AM

Hooked up a VSS sensor straight to the cluster, and its still not showing speed.
Now I remember something about the ABS ECU, when it's not hooked up, speed won't go up... Now on the look out for which signal i'm missing/needing

07-19-2019, 05:23 AM	#1
speedingmofa Zilvia Member Join Date: Nov 2012 Location: Rotterdam, the Netherlands Posts: 257 Trader Rating: (15) Feedback Score: 15 reviews	Bench testing S14 cluster - speedo/tach signals Hey guys, what I want to do is to have any S14/S13 cluster tested on a test bench. In particular the tach and speedo. Now i want to have this tested, WITHOUT having to have all this connected in my car, or it wouldn't be called a test bench... So how can I simulate these signals with minimal effort? I have no knowledge of arduino etc to build anything of the sort... I do have a borrowed bitscope micro which can simulate a square 50% dc signal for the speedo, but it's not having it. The cluster is powered on (12V on ignition pin, ground on ground pin, water and fuel level work!), but it seems it's not having it... Possibly, because the bitscope can only generate a voltage of 3.3V. As for the tach, i was hoping a similar signal would work, tried all types, sine, square, triangle, different duty cycles, none seem to work. Again, possibly due to the bitscope only being able to generate 3.3V. I've also tried a fan controller, which is 12V and sends out square PWM signals. Got it hooked up at the back... but it's not having it either! No movements whatsoever. Welp! __________________ Need UKDM/EUDM/JDM/RHD Nissan parts? Hit me up Insta: skids14

07-22-2019, 02:48 AM	#2
speedingmofa Zilvia Member Join Date: Nov 2012 Location: Rotterdam, the Netherlands Posts: 257 Trader Rating: (15) Feedback Score: 15 reviews	Where the electronics experts at __________________ Need UKDM/EUDM/JDM/RHD Nissan parts? Hit me up Insta: skids14

07-31-2019, 06:33 AM	#3
speedingmofa Zilvia Member Join Date: Nov 2012 Location: Rotterdam, the Netherlands Posts: 257 Trader Rating: (15) Feedback Score: 15 reviews	Hooked up a VSS sensor straight to the cluster, and its still not showing speed. Now I remember something about the ABS ECU, when it's not hooked up, speed won't go up... Now on the look out for which signal i'm missing/needing __________________ Need UKDM/EUDM/JDM/RHD Nissan parts? Hit me up Insta: skids14

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode