The one you've been waiting for: Kazama GB!! - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

anotheraznguy · 04-13-2003, 06:03 AM

he is out of town till tues..

Beef · 04-15-2003, 08:06 AM

Now that I can actually post again... ??

I'm in and have paid in full for the super tie rod ends.

1fasts13 · 04-15-2003, 09:30 AM

hey guys,

sorry been out of town for a lil bit, had a "driving school" to attend

ok current status of GB:

we have over 10+ for EVERYTHING except the arm series and the tension rod bars. we are however VERY CLOSE to 10+ for the arm series (currently 8) if i can get one more person in i will cover the 10th one so that will be under the 10+ pricing

for those guys that are only getting one piece, not set, of the arm series your pricing will be at the 1-9 because only one or two are not getting the complete set.

again all deposits/payments are now being accepted so get them in!! i will continue to keep this buy open to new guys for at least 1 or 2 more weeks. in the meantime sometime next week i will start ordering up all the stuffs and get the shipments going.

i'll update the page later to show who has paid/in etc.

thanks

adey · 04-16-2003, 05:44 AM

do we have an ETA for the parts to our doors? ... if you start ordering next week... let's see, maybe we can expect them near the end of may?

Anyway if you can get them to us (or me, at least) asap, that'd be great. I will be out of the country from the end of may/beginning of June, and would really like to get it in before then!
Thanks!

Maeda · 04-16-2003, 07:30 PM

i think i might be in on some pillowball tension rods...

1fasts13 · 04-18-2003, 04:47 PM

adey - right now yes i am looking at end of may delivery or so. that should be reasonable enough.

we got about half the people who has responded with the payments etc so the rest of you hurry up and get them in

GotDriftS14 · 04-22-2003, 06:09 PM

i sent you an email a few days back, but my internet connection has been down for a while so i have been unable to post. im in for the S14 tension rods. will attempt to pay tonight (as long as my POS credit card gets accepted)!

kandyflip445 · 04-24-2003, 01:07 AM

I just wanted to know if this GB will be goin on for about 2 more weeks...If it is then I'd like some pillow tension rods. PM me or post some info. I should have my s13 by this tues. if everything goes well.

autobahNESSA · 04-26-2003, 10:12 AM

when is this going to end?

Im hoping to save the funds for the endlinks, since mine are leaking at the seals.

1fasts13 · 04-30-2003, 01:06 AM

all orders are already wrapped up!!

although if you ask nicely maybe i'll let u take one of the pieces that i order as stock

adey · 05-01-2003, 08:41 PM

Nice! so we can expect these relatively soon? ...

maybe by DD5? (may 24) ... I'd loooove to get the tc rods in by then!

Thanks for getting this together, leo!

mixedwell · 05-02-2003, 05:57 PM

man im not sure if i even need those things.. but count me in anyways. ahahah what the hell? im not even a bad ass drifter. ok kids... if i buy these things i better start looking like koguchi.. ahah jk! but count me in. (should i grow out my hair and bleach it?) holla

mixedwell

sspikey · 05-04-2003, 07:11 AM

Quote:

Originally posted by 1fasts13
all orders are already wrapped up!!

although if you ask nicely maybe i'll let u take one of the pieces that i order as stock

just found the GB

please check your emails.

adey · 05-10-2003, 03:46 AM

so... I guess we won't be able to get these by the 23rd, will we.... ? Oh well! Let us know how things are coming! :thumbsup:

s14_silvia2003 · 05-12-2003, 08:23 PM

I 'd like to get in on the GB on Kazaama Tc rods and complete rear arm set for S14 zenki ...thanx..my email is [email protected] to confirm...rk

anotheraznguy · 05-13-2003, 02:06 PM

where in the world has he gone..
i tried emailing him..
and its been weeks since i last heard from him..
anyone else?

Dousan_PG · 05-13-2003, 02:20 PM

i emailed him and chit chatted back and forth yesterday
probably super busy. i'll try and contact him see what's up.

1fasts13 · 05-13-2003, 03:00 PM

who has tried emailing me??

oh btw i'm only posting cuz aaron told me to do so

hahaha jk.....

no seriously, there is nothing to update right now, because we are still waiting on kazama to deliver parts to us. they told me because of the large volume of order it will take them a few weeks to get them all together....i guess they didnt think i was serious when i told them i would be ordering alot of chit

but rest assured, when i find out when they are delivering and when it goes on the boat u guys will be the first to know!!

leo
www.jdmspecperf.com

Steeles · 05-15-2003, 08:04 AM

good that gives me plenty of time to save up the money for the other half of this chit

lol

pchio · 05-15-2003, 01:48 PM

is the GB ended yet?? I need a pair of tension rods.

If anyone bought a pair of kazama tension rods for s14 from the group buy and now you want to sell it, please let me know, i will get it off you.

Or, if anyone have ONE battleversion tension rod s13/s14 or just the rod end and want to sell it, let me know too.

Thanks,
Pat

anotheraznguy · 05-21-2003, 10:20 AM

sweet...
just wanted to make sure u werent leaving us high and dry
=)

sleek240 · 05-27-2003, 11:32 PM

is there any news yet on the parts if they are here or not... just wanted to know....

lkater

Carlos

Dousan_PG · 05-28-2003, 09:32 AM

Quote:

Originally posted by sleek240
is there any news yet on the parts if they are here or not... just wanted to know....

lkater

Carlos

you people cant read on 05-13-2003 02:00 PM

Quote:

no seriously, there is nothing to update right now, because we are still waiting on kazama to deliver parts to us. they told me because of the large volume of order it will take them a few weeks to get them all together....i guess they didnt think i was serious when i told them i would be ordering alot of chit

few weeks to GET THEM ALL TOGETHER (meaning Kazama in japan) then add shipping time from Japan to leo, for leo to get it organized and send it to you...

leo wont flake or jump ship, have patience.

1fasts13 · 05-30-2003, 05:29 AM

just got werd that the kazama stuff is all in and COULD BE ready to head to the container as early as next week

so far so good for end of july delivery

Steeles · 05-30-2003, 07:21 AM

sweet! hey is it too late to grab a set of TC rods? hehe someones gonna buy my monkey magics so I can get a matching Kazama set

drift into a curb · 05-30-2003, 03:27 PM

end of July? wow, I thought end of June at the latest. I'm not complaining though, its a great GB, thanks for the update!

adey · 05-30-2003, 04:08 PM

Good to hear that the stuff's coming together! I'm looking forward to receiving the package, even though I won't be stateside when it arrives.

I'm flying out to Hong Kong for an internship in early July. Maybe they could ship one package there instead?

Kidding.
Anyway I wanted to say thanks again, Leo!! If you have any spare sets of RUCA and toe control rods, I might be interested in 'em. But we can discuss that later when I have some money.

Thanks again!!

95Blue240sx · 05-30-2003, 04:39 PM

yeah im also interested in getting a set of RUCA if you got an extra set around. but as adey said gotta see what the wallet says =P

oberkill · 05-30-2003, 05:27 PM

Well I am going to end up selling mine. I cant wait to the end of July so I am going to buy a different set. So if anyone is interested in a set of the S13 TC rods let me know!

Alan

Night Slide Josh · 06-01-2003, 04:24 PM

hey alan. i might be interested in your set of tc rods..
my other name is anotheraznguy and i already bought the bushings and the tie rod end..
how much are the tc rods?

04-15-2003, 08:06 AM	#32
Beef Leaky Injector Join Date: Dec 2001 Location: MN Posts: 101 Trader Rating: (0) Feedback Score: 0 reviews	Now that I can actually post again... ?? I'm in and have paid in full for the super tie rod ends. __________________ -Keith KaizoPhoto \| Touge Factory \| version:SELECT \| Stance SUS

04-16-2003, 07:30 PM	#35
Maeda Nissanaholic! Join Date: Dec 2002 Location: Camp Snake Bite, CA RIP Posts: 2,356 Trader Rating: (0) Rides Gallery: Maeda Feedback Score: 0 reviews	i think i might be in on some pillowball tension rods... __________________

04-22-2003, 06:09 PM	#37
GotDriftS14 Zilvia Junkie Join Date: Dec 2001 Location: San Jose Age: 38 Posts: 556 Trader Rating: (0) Feedback Score: 0 reviews	i sent you an email a few days back, but my internet connection has been down for a while so i have been unable to post. im in for the S14 tension rods. will attempt to pay tonight (as long as my POS credit card gets accepted)! __________________

05-02-2003, 05:57 PM	#42
mixedwell Zilvia Addict Join Date: Sep 2002 Location: SOuth Cali Posts: 892 Trader Rating: (0) Feedback Score: 0 reviews	man im not sure if i even need those things.. but count me in anyways. ahahah what the hell? im not even a bad ass drifter. ok kids... if i buy these things i better start looking like koguchi.. ahah jk! but count me in. (should i grow out my hair and bleach it?) holla mixedwell __________________ silvia... my love ::

05-12-2003, 08:23 PM	#45
s14_silvia2003 Join Date: May 2003 Location: T.O. Canada Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	GB on kazaama Tc rods and rear arm set I 'd like to get in on the GB on Kazaama Tc rods and complete rear arm set for S14 zenki ...thanx..my email is [email protected] to confirm...rk

04-13-2003, 06:03 AM	#31
anotheraznguy Zilvia Junkie Join Date: Mar 2002 Location: fremont ca Age: 38 Posts: 369 Trader Rating: (2) Feedback Score: 2 reviews	he is out of town till tues..

04-15-2003, 09:30 AM	#33
1fasts13 Zilvia Member Join Date: Oct 2002 Location: socal/LA Posts: 281 Trader Rating: (0) Feedback Score: 0 reviews	hey guys, sorry been out of town for a lil bit, had a "driving school" to attend ok current status of GB: we have over 10+ for EVERYTHING except the arm series and the tension rod bars. we are however VERY CLOSE to 10+ for the arm series (currently 8) if i can get one more person in i will cover the 10th one so that will be under the 10+ pricing for those guys that are only getting one piece, not set, of the arm series your pricing will be at the 1-9 because only one or two are not getting the complete set. again all deposits/payments are now being accepted so get them in!! i will continue to keep this buy open to new guys for at least 1 or 2 more weeks. in the meantime sometime next week i will start ordering up all the stuffs and get the shipments going. i'll update the page later to show who has paid/in etc. thanks

04-16-2003, 05:44 AM	#34
adey Post Whore! Join Date: Mar 2002 Location: Hong Kong Posts: 3,061 Trader Rating: (0) Feedback Score: 0 reviews	do we have an ETA for the parts to our doors? ... if you start ordering next week... let's see, maybe we can expect them near the end of may? Anyway if you can get them to us (or me, at least) asap, that'd be great. I will be out of the country from the end of may/beginning of June, and would really like to get it in before then! Thanks!

04-18-2003, 04:47 PM	#36
1fasts13 Zilvia Member Join Date: Oct 2002 Location: socal/LA Posts: 281 Trader Rating: (0) Feedback Score: 0 reviews	adey - right now yes i am looking at end of may delivery or so. that should be reasonable enough. we got about half the people who has responded with the payments etc so the rest of you hurry up and get them in

04-24-2003, 01:07 AM	#38
kandyflip445 Post Whore! Join Date: Sep 2002 Location: Arden, NC Age: 36 Posts: 4,460 Trader Rating: (1) Rides Gallery: kandyflip445 Feedback Score: 1 reviews	I just wanted to know if this GB will be goin on for about 2 more weeks...If it is then I'd like some pillow tension rods. PM me or post some info. I should have my s13 by this tues. if everything goes well.

04-26-2003, 10:12 AM	#39
autobahNESSA Zilvia FREAK! Join Date: Aug 2002 Location: Milpitas/Irvine, CA Posts: 1,257 Trader Rating: (3) Feedback Score: 3 reviews	when is this going to end? Im hoping to save the funds for the endlinks, since mine are leaking at the seals.

04-30-2003, 01:06 AM	#40
1fasts13 Zilvia Member Join Date: Oct 2002 Location: socal/LA Posts: 281 Trader Rating: (0) Feedback Score: 0 reviews	all orders are already wrapped up!! although if you ask nicely maybe i'll let u take one of the pieces that i order as stock

05-01-2003, 08:41 PM	#41
adey Post Whore! Join Date: Mar 2002 Location: Hong Kong Posts: 3,061 Trader Rating: (0) Feedback Score: 0 reviews	Nice! so we can expect these relatively soon? ... maybe by DD5? (may 24) ... I'd loooove to get the tc rods in by then! Thanks for getting this together, leo!

05-10-2003, 03:46 AM	#44
adey Post Whore! Join Date: Mar 2002 Location: Hong Kong Posts: 3,061 Trader Rating: (0) Feedback Score: 0 reviews	so... I guess we won't be able to get these by the 23rd, will we.... ? Oh well! Let us know how things are coming! :thumbsup:

05-13-2003, 02:06 PM	#46
anotheraznguy Zilvia Junkie Join Date: Mar 2002 Location: fremont ca Age: 38 Posts: 369 Trader Rating: (2) Feedback Score: 2 reviews	where in the world has he gone.. i tried emailing him.. and its been weeks since i last heard from him.. anyone else?

05-13-2003, 02:20 PM	#47
Dousan_PG Post Whore! Join Date: May 2002 Location: Orange County, California Age: 42 Posts: 16,640 Trader Rating: (23) Rides Gallery: Dousan_PG Feedback Score: 23 reviews	i emailed him and chit chatted back and forth yesterday probably super busy. i'll try and contact him see what's up. __________________ Aaron Pink GodziRa www.geocities.com/pink_godzira

05-13-2003, 03:00 PM	#48
1fasts13 Zilvia Member Join Date: Oct 2002 Location: socal/LA Posts: 281 Trader Rating: (0) Feedback Score: 0 reviews	who has tried emailing me?? oh btw i'm only posting cuz aaron told me to do so hahaha jk..... no seriously, there is nothing to update right now, because we are still waiting on kazama to deliver parts to us. they told me because of the large volume of order it will take them a few weeks to get them all together....i guess they didnt think i was serious when i told them i would be ordering alot of chit but rest assured, when i find out when they are delivering and when it goes on the boat u guys will be the first to know!! leo www.jdmspecperf.com

05-15-2003, 08:04 AM	#49
Steeles Post Whore! Join Date: Sep 2002 Location: 7th layer of hell, special pit of anger Age: 45 Posts: 3,785 Trader Rating: (0) Feedback Score: 0 reviews	good that gives me plenty of time to save up the money for the other half of this chit lol __________________ Keeping it Godzira bishes. So I murdered another turbo

05-15-2003, 01:48 PM	#50
pchio Zilvia Member Join Date: Aug 2001 Posts: 150 Trader Rating: (0) Feedback Score: 0 reviews	is the GB ended yet?? I need a pair of tension rods. If anyone bought a pair of kazama tension rods for s14 from the group buy and now you want to sell it, please let me know, i will get it off you. Or, if anyone have ONE battleversion tension rod s13/s14 or just the rod end and want to sell it, let me know too. Thanks, Pat

05-21-2003, 10:20 AM	#51
anotheraznguy Zilvia Junkie Join Date: Mar 2002 Location: fremont ca Age: 38 Posts: 369 Trader Rating: (2) Feedback Score: 2 reviews	sweet... just wanted to make sure u werent leaving us high and dry =)

05-27-2003, 11:32 PM	#52
sleek240 Leaky Injector Join Date: Apr 2002 Location: cinci ohio Age: 45 Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	is there any news yet on the parts if they are here or not... just wanted to know.... lkater Carlos

05-30-2003, 05:29 AM	#54
1fasts13 Zilvia Member Join Date: Oct 2002 Location: socal/LA Posts: 281 Trader Rating: (0) Feedback Score: 0 reviews	just got werd that the kazama stuff is all in and COULD BE ready to head to the container as early as next week so far so good for end of july delivery

05-30-2003, 07:21 AM	#55
Steeles Post Whore! Join Date: Sep 2002 Location: 7th layer of hell, special pit of anger Age: 45 Posts: 3,785 Trader Rating: (0) Feedback Score: 0 reviews	sweet! hey is it too late to grab a set of TC rods? hehe someones gonna buy my monkey magics so I can get a matching Kazama set __________________ Keeping it Godzira bishes. So I murdered another turbo

05-30-2003, 03:27 PM	#56
drift into a curb Post Whore! Join Date: Mar 2002 Location: Seoul, South Korea Posts: 2,870 Trader Rating: (5) Feedback Score: 5 reviews	end of July? wow, I thought end of June at the latest. I'm not complaining though, its a great GB, thanks for the update!

05-30-2003, 04:08 PM	#57
adey Post Whore! Join Date: Mar 2002 Location: Hong Kong Posts: 3,061 Trader Rating: (0) Feedback Score: 0 reviews	Good to hear that the stuff's coming together! I'm looking forward to receiving the package, even though I won't be stateside when it arrives. I'm flying out to Hong Kong for an internship in early July. Maybe they could ship one package there instead? Kidding. Anyway I wanted to say thanks again, Leo!! If you have any spare sets of RUCA and toe control rods, I might be interested in 'em. But we can discuss that later when I have some money. Thanks again!!

05-30-2003, 04:39 PM	#58
95Blue240sx Post Whore! Join Date: Jul 2002 Location: Girls pee-pee when they see me Age: 37 Posts: 4,084 Trader Rating: (0) Rides Gallery: 95Blue240sx Feedback Score: 0 reviews	yeah im also interested in getting a set of RUCA if you got an extra set around. but as adey said gotta see what the wallet says =P __________________ Please leave me feedback

05-30-2003, 05:27 PM	#59
oberkill Zilvia Junkie Join Date: Oct 2001 Location: St. Louis, MO Posts: 314 Trader Rating: (0) Rides Gallery: oberkill Feedback Score: 0 reviews	Well I am going to end up selling mine. I cant wait to the end of July so I am going to buy a different set. So if anyone is interested in a set of the S13 TC rods let me know! Alan __________________ http://www.project240.com

06-01-2003, 04:24 PM	#60
Night Slide Josh Join Date: Nov 2002 Location: NJ Posts: 39 Trader Rating: (0) Feedback Score: 0 reviews	hey alan. i might be interested in your set of tc rods.. my other name is anotheraznguy and i already bought the bushings and the tie rod end.. how much are the tc rods?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode