Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 09-12-2010, 06:14 PM   #1
CleanAndLegit
Post Whore!
 
CleanAndLegit's Avatar
 
Join Date: Aug 2009
Location: Rancho Cucamonga
Posts: 3,693
Trader Rating: (55)
CleanAndLegit is an unknown quantity at this point
Feedback Score: 55 reviews
eye hole bolts (for harness install) where to get em?

where do you get em at, i dont really wanna order em from sparco or whatever
is there any other place to get them at?
i have 4 but theyre too big ): and wont fit
i understand that they are 3/8 or 14mm bolts fine thread so yeah
shoot me a good place
i already trieddd, harbor freight home depot, and ace hardware
__________________
CleanAndLegit is offline   Reply With Quote
Sponsored Links
Old 09-12-2010, 08:50 PM   #2
codyace
Post Whore!
 
codyace's Avatar
 
Join Date: Dec 2004
Location: Poconos, PA
Age: 36
Posts: 8,030
Trader Rating: (58)
codyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfection
Feedback Score: 58 reviews
Send a message via AIM to codyace
It's blatantly obvious that not only are you cheap, but also lazy. Have you ever used google?

Impact Racing 50000021 - Impact Racing Harness Bolt-In Anchor Plates - Overview - SummitRacing.com


Install your harness properly, using the right hardware, and of course name brand belts. Why cheap out on a 6-10 dollar part when it involves your health/safety/well being?
__________________

Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information!

Quest Alternator Conversions for SR20! Check my Group Buy!

Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy
codyace is offline   Reply With Quote
Old 09-12-2010, 11:45 PM   #3
CleanAndLegit
Post Whore!
 
CleanAndLegit's Avatar
 
Join Date: Aug 2009
Location: Rancho Cucamonga
Posts: 3,693
Trader Rating: (55)
CleanAndLegit is an unknown quantity at this point
Feedback Score: 55 reviews
Quote:
Originally Posted by codyace View Post
It's blatantly obvious that not only are you cheap, but also lazy. Have you ever used google?

Impact Racing 50000021 - Impact Racing Harness Bolt-In Anchor Plates - Overview - SummitRacing.com


Install your harness properly, using the right hardware, and of course name brand belts. Why cheap out on a 6-10 dollar part when it involves your health/safety/well being?
well reason i dont wanna get em from sparco is cause 1 i already have em and they are too big and 2 i wouldnt wanna buy them again only to find out they are too big, and i did use google came up with pretty much nada

and also i was trying to use the eye hole bolts cause its easier to get in and out... ahaha
and thanks thiough might just go with that
__________________
CleanAndLegit is offline   Reply With Quote
Old 09-16-2010, 03:19 PM   #4
codyace
Post Whore!
 
codyace's Avatar
 
Join Date: Dec 2004
Location: Poconos, PA
Age: 36
Posts: 8,030
Trader Rating: (58)
codyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfectioncodyace is close to perfection
Feedback Score: 58 reviews
Send a message via AIM to codyace
Why not just install them per specs, using the brand's suggested hardware, and then also installed properly in care.

Harnesses are meant for 'track' use. They should not be easy to get on or off.
__________________

Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information!

Quest Alternator Conversions for SR20! Check my Group Buy!

Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy
codyace is offline   Reply With Quote
Old 09-19-2010, 07:43 PM   #5
CleanAndLegit
Post Whore!
 
CleanAndLegit's Avatar
 
Join Date: Aug 2009
Location: Rancho Cucamonga
Posts: 3,693
Trader Rating: (55)
CleanAndLegit is an unknown quantity at this point
Feedback Score: 55 reviews
Quote:
Originally Posted by codyace View Post
Why not just install them per specs, using the brand's suggested hardware, and then also installed properly in care.

Harnesses are meant for 'track' use. They should not be easy to get on or off.
well the thing is my harness came with the hooks and they are sparco... so infact if i were to locate the eyehole bolts then id beinstalling them properly... so yeah i dont really care for the easy off and on id just rather not spend more money on the things i in a way already have... so yeah i wanna know where to get the right eye bolts
__________________
CleanAndLegit is offline   Reply With Quote
Old 09-16-2010, 09:58 PM   #6
jachien
Leaky Injector
 
Join Date: Feb 2010
Location: Cerritos, CA
Posts: 128
Trader Rating: (6)
jachien is an unknown quantity at this point
Feedback Score: 6 reviews
takata has 2 different kinds. a short and a long.
jachien is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™