S13 pbm max angle knuckle/lca on s14? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Breakbeat93 · 03-23-2013, 12:56 AM

I picked up the pbm max angle knuckle and lca that came off an s13...I was wondering if I'm going to run into any issues installing this on my 97?

Also I was planning on picking up Megan inner tie rods and ends. Because from what vie found through searching this seems to be a necessity. Is this what I need? And will this work?

Thanks for your help

Breakbeat93 · 03-25-2013, 07:04 PM

Nobody has any incite?

thefro526 · 03-27-2013, 11:00 AM

Running S13 Knuckles on an S14 is simple.

You'll need the matching ball joints for the knuckle, if the LCA is already for the knuckle, you're good.

Otherwise, you'll need the correct mounting bolts or conversion sleeves or drill out the holes to go with the bolt size. S14 Strut Bolts are 14mm where as S13 are 12mm.

Breakbeat93 · 03-30-2013, 07:46 PM

Cool. Thanks for the help

03-23-2013, 12:56 AM	#1
Breakbeat93 Zilvia Member Join Date: Dec 2010 Location: Southern NY Age: 38 Posts: 180 Trader Rating: (4) Feedback Score: 4 reviews	S13 pbm max angle knuckle/lca on s14? I picked up the pbm max angle knuckle and lca that came off an s13...I was wondering if I'm going to run into any issues installing this on my 97? Also I was planning on picking up Megan inner tie rods and ends. Because from what vie found through searching this seems to be a necessity. Is this what I need? And will this work? Thanks for your help

03-27-2013, 11:00 AM	#3
thefro526 Nissanaholic! Join Date: Feb 2008 Location: New Jersey Posts: 1,813 Trader Rating: (8) Feedback Score: 8 reviews	Running S13 Knuckles on an S14 is simple. You'll need the matching ball joints for the knuckle, if the LCA is already for the knuckle, you're good. Otherwise, you'll need the correct mounting bolts or conversion sleeves or drill out the holes to go with the bolt size. S14 Strut Bolts are 14mm where as S13 are 12mm. __________________ http://thefro526.wordpress.com/ Deto International

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-25-2013, 07:04 PM	#2
Breakbeat93 Zilvia Member Join Date: Dec 2010 Location: Southern NY Age: 38 Posts: 180 Trader Rating: (4) Feedback Score: 4 reviews	Nobody has any incite?

03-30-2013, 07:46 PM	#4
Breakbeat93 Zilvia Member Join Date: Dec 2010 Location: Southern NY Age: 38 Posts: 180 Trader Rating: (4) Feedback Score: 4 reviews	Cool. Thanks for the help