ISR rear upper control arm issue - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

hatchtastic · 05-08-2018, 04:48 PM

What’s up guys, I am in the middle of installing my isr pro arms and I’m having an issue with the rear upper arms. The bolt that goes through the side connecting to the knuckle is to large for the hole in the arm. So before I take out my drill I wanted to see if anyone else has had the same issue. The bolt is oem. Thanks for any help

apex128 · 05-08-2018, 06:24 PM

That's weird. Maybe the bolt had been replaced in the past and the previous owner just used whatever fit. If it is an actual oem bolt then I would just get a new 10.9 bolt and call it a day.

05-08-2018, 04:48 PM	#1
hatchtastic Zilvia Member Join Date: Feb 2013 Location: phoenix az Age: 31 Posts: 281 Trader Rating: (6) Feedback Score: 6 reviews	ISR rear upper control arm issue What’s up guys, I am in the middle of installing my isr pro arms and I’m having an issue with the rear upper arms. The bolt that goes through the side connecting to the knuckle is to large for the hole in the arm. So before I take out my drill I wanted to see if anyone else has had the same issue. The bolt is oem. Thanks for any help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-08-2018, 06:24 PM	#2
apex128 Zilvia Member Join Date: Jul 2016 Location: Chicago suburbs Posts: 173 Trader Rating: (0) Feedback Score: 0 reviews	That's weird. Maybe the bolt had been replaced in the past and the previous owner just used whatever fit. If it is an actual oem bolt then I would just get a new 10.9 bolt and call it a day.