Anarchy Performance SR20DET Bug Eye WRX Build - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

unpaintedhatch · 04-04-2011, 12:50 PM

Fuck yeah this is the things i like to see good shit guys!!!!! two thumbs up

Catch240 · 04-04-2011, 09:19 PM

this is bad-ass I may have to come by either in my 240 or my bugeye subaru....hmmm

anarchyperf · 04-12-2011, 05:29 AM

Dash is back in. Custom switch panel installed. Backed the car out of the garage under it's own power last night

CamryOnBronze · 04-12-2011, 07:15 AM

Wow, pretty cool!

howyfeltersnatch · 04-12-2011, 01:07 PM

pics or it didnt happen father craig

anarchyperf · 04-18-2011, 05:39 AM

Sorry for the lack of updates but here we go.

- I started going through all the wiring jazz and got fed up with tracing all the unwanted wiring so I ripped out all stock wiring in the car and installed a painless fuse block and relocated inside the car.

-Mounted the Microtech LT10S and X4 unit in Glove box for easy removal. Even though there's no keys required your not getting very far without the ecu

-Added more support to the subframe by welding in some square tubing. Also ordered the Megan racing H brace.

-Aligned the car as much as I could

-Converted wrx power steering rack to a Manual rack

-Drove the car down the road and back

angeldunk707 · 04-19-2011, 02:15 PM

Quote:

Originally Posted by anarchyperf

Sorry for the lack of updates but here we go.

- I started going through all the wiring jazz and got fed up with tracing all the unwanted wiring so I ripped out all stock wiring in the car and installed a painless fuse block and relocated inside the car.

-Mounted the Microtech LT10S and X4 unit in Glove box for easy removal. Even though there's no keys required your not getting very far without the ecu

-Added more support to the subframe by welding in some square tubing. Also ordered the Megan racing H brace.

-Aligned the car as much as I could

-Converted wrx power steering rack to a Manual rack

-Drove the car down the road and back

it looks like we are trailing in eachothers footsteps...i ripped my interior harness out and hard wired everything to my switch panel as well as mounted all my relays in my glove box. i put a 93' manual rack in my car (most angle of all imprezas that i know of) and now im waiting on this intercooler piping so i can start my car and see if the wiring is done right.

anarchyperf · 04-20-2011, 11:34 AM

Quote:

Originally Posted by angeldunk707

it looks like we are trailing in eachothers footsteps...i ripped my interior harness out and hard wired everything to my switch panel as well as mounted all my relays in my glove box. i put a 93' manual rack in my car (most angle of all imprezas that i know of) and now im waiting on this intercooler piping so i can start my car and see if the wiring is done right.

Very nice... You using the stock ecu? I'll have to look into the 93 rack option.

angeldunk707 · 04-20-2011, 12:46 PM

Quote:

Originally Posted by anarchyperf

Very nice... You using the stock ecu? I'll have to look into the 93 rack option.

no im running Apexi Power FC. im building the motor to 350whp. there isnt an engine bay or interior harness. whole car was stripped down and was built from a bare shell.

anarchyperf · 04-21-2011, 05:34 AM

Quote:

Originally Posted by angeldunk707

no im running Apexi Power FC. im building the motor to 350whp. there isnt an engine bay or interior harness. whole car was stripped down and was built from a bare shell.

Awesome. I will be doing the same thing. It's pretty gutted at the moment but once it's 100% on the road and makes it through a few drift events I will be tearing it all back down for new paint and whatnot.

anarchyperf · 04-21-2011, 06:20 AM

Here are some updated photos finally outside the garage

After prodrive drop springs the front sits at about stock height

Microtech LT10s and X4 installed in glove box

Rocker Arm Stoppers Installed

Toi · 04-21-2011, 06:28 AM

Quote:

Originally Posted by angeldunk707

nice work. i'm the guy with the sr20/GC. what are you going to do about your rearend? the power of the SR will snap your axles like no tomorrow. i'm currently designing a setup for my car where i can use the whole S13/14 rear subframe and since i'm making a custom tubular crossmember i will also be using all S14 tension rods, tie rods, spindles etc.

Good work. keep it up

ARE YOU SERIOUS??

The power hahahahahah oh that is rich.....SR never even came close to the Stock power of any Subaru after 96.....and I never snapped an axle smoking 4 tires on an EJ20G closed deck stroked out to 2.2L, p&P heads, with a 2835 and Meth injection.

The only way you are snapping axles is if you are doing it wrong i.e. going to like a +20 offset (05 models and PCD 114.3 excluded

angeldunk707 · 04-21-2011, 08:27 AM

Quote:

Originally Posted by Toi

ARE YOU SERIOUS??

The power hahahahahah oh that is rich.....SR never even came close to the Stock power of any Subaru after 96.....and I never snapped an axle smoking 4 tires on an EJ20G closed deck stroked out to 2.2L, p&P heads, with a 2835 and Meth injection.

The only way you are snapping axles is if you are doing it wrong i.e. going to like a +20 offset (05 models and PCD 114.3 excluded

So you mean to tell me in 96-01 all the GC's had 200+ hp? do you know what you're saying? or did you hop in this thread thinking you KNOW your stuff and was hoping you'd teach us a thing or two?

I dont know if you're location is true, but if so then you know that 96+ Subarus were WRX's (in japan) which were turboed so yes THOSE ones had more HP than an SR, but not the ones out here in the states (from 93-01 they didnt even exceed 180hp..even our WRX turboed Bug-Eye barely exceeded 200hp).

Now mind you. that power is distributed between front end and rear end (Thats how AWD works buddy "smoking 4 tires"), so unless you were pushing 600+ im not really interested in your statement.

ALL 375whp of mine will be sent straight to the rear end, and i'm running 17x9.5 +22 wheels all around which is more weight. Subaru rear ends wont hold up to the POWER. especially that tiny diff with the toothpick axles. hence the reason im doing a S13 rear subframe with S13 axles.

howyfeltersnatch · 04-21-2011, 01:16 PM

Quote:

Originally Posted by Toi

ARE YOU SERIOUS??

The power hahahahahah oh that is rich.....SR never even came close to the Stock power of any Subaru after 96.....and I never snapped an axle smoking 4 tires on an EJ20G closed deck stroked out to 2.2L, p&P heads, with a 2835 and Meth injection.

The only way you are snapping axles is if you are doing it wrong i.e. going to like a +20 offset (05 models and PCD 114.3 excluded

Quote:

Originally Posted by angeldunk707

So you mean to tell me in 96-01 all the GC's had 200+ hp? do you know what you're saying? or did you hop in this thread thinking you KNOW your stuff and was hoping you'd teach us a thing or two?

I dont know if you're location is true, but if so then you know that 96+ Subarus were WRX's (in japan) which were turboed so yes THOSE ones had more HP than an SR, but not the ones out here in the states (from 93-01 they didnt even exceed 180hp..even our WRX turboed Bug-Eye barely exceeded 200hp).

Now mind you. that power is distributed between front end and rear end (Thats how AWD works buddy "smoking 4 tires"), so unless you were pushing 600+ im not really interested in your statement.

ALL 375whp of mine will be sent straight to the rear end, and i'm running 17x9.5 +22 wheels all around which is more weight. Subaru rear ends wont hold up to the POWER. especially that tiny diff with the toothpick axles. hence the reason im doing a S13 rear subframe with S13 axles.

i dunno if either one of you have an idea. my sr put down 207 stock. wrx 230 stock. both dynojet. im not gonna say wrx is superior at all (to 4 wheels yes) to two no..

you'll only snap an axle if you don't know how to launch (an awd car)... the rear would pop before anything(rear wheel), then next in line would be the sr tranny, then would come the axles.. (that also depends on what tire size your running) a wider tire=more grip=more strain on the driveline. everyone says ohhhhhh i've owned this and it had this done to it. that doesnt meant shit.. exact same car with two diff drivers would yeild way diff results (problems) if your gonna have a dick measuring contest do it elsewhere.. everyone on earth knows the stock wrx ish isnt going to last long being rwd. everyones seen the countless threads (atleast i have) sure some may hold up longer than others depending on the driver but they will all fail no matter what.

howyfeltersnatch · 04-21-2011, 01:17 PM

P.s mine's bigger

angeldunk707 · 04-21-2011, 01:21 PM

you just said what i said...in a different way. and with 375hp to the rear wheels with the combination of clutch kicking and ebrake entries (not launching)...the axles will snap no matter who the driver is. 95 impreza axles will SNAP under the power im putting to them.

howyfeltersnatch · 04-21-2011, 01:31 PM

Quote:

Originally Posted by angeldunk707

you just said what i said...in a different way. and with 375hp to the rear wheels with the combination of clutch kicking and ebrake entries (not launching)...the axles will snap no matter who the driver is. 95 impreza axles will SNAP under the power im putting to them.

i know, i just wanted to set myself up for the ps mines bigger comment.

Toi · 04-22-2011, 06:05 AM

Quote:

Originally Posted by howyfeltersnatch

P.s mine's bigger

^^ That is debatable hahahaha

As for snapping axles I was laughing at the fact he said POWER OF THE SR! The 2001 US bugeye has more power than most SRs unless you counted the S15 motor.

Also I haven't seen one snap at MSP, Ebisu, or anywhere else for that matter but then maybe the JDM models are built a bit differently I dunno.

Oh I never touched north of 600 mine was slightly north of 500 then I sold it and the guy wrecked it 6 months later LOL

angeldunk707 · 04-22-2011, 09:55 AM

Quote:

Originally Posted by Toi

^^ That is debatable hahahaha

As for snapping axles I was laughing at the fact he said POWER OF THE SR! The 2001 US bugeye has more power than most SRs unless you counted the S15 motor.

Also I haven't seen one snap at MSP, Ebisu, or anywhere else for that matter but then maybe the JDM models are built a bit differently I dunno.

Oh I never touched north of 600 mine was slightly north of 500 then I sold it and the guy wrecked it 6 months later LOL

well lets clarify something...im not planning on doing all this work and dropping in a stock SR...like i said 375whp and shooting for about the same in torque so when i say "power of the sr" im speaking in terms to MY SR.

camaro379ss · 04-22-2011, 10:33 AM

This is kinda like those random obscure cars that are pretty cool to see done once. Like there was an fd with a sr20 in it at a car show I went to once before.

Looks Good.

anarchyperf · 05-06-2011, 06:46 PM

Quick glance at the new subframe under construction

white-coupin · 05-26-2011, 03:47 AM

any complications with this swap anything needed more information on what needed to be done

anarchyperf · 05-26-2011, 07:33 PM

Quote:

Originally Posted by white-coupin

any complications with this swap anything needed more information on what needed to be done

Define complication. Entire custom front subframe had to be built, custom steering shaft, Trans crossmember had to be modified, driveshaft had to be custom built, all the wiring had to be figured out, rad mounts modified, custom intercooler piping setup. I'm sure I'm forgetting stuff but it's no where as easy as a SR swap in a 240. That's for sure.

Ohh I am picking up a S13 coupe so I can get some seat time in this summer. By next year this car should be out in full form.

anton1o · 08-18-2011, 10:13 PM

Any more progress on this? Its been a few months now

Corbic · 08-19-2011, 05:40 AM

Reminds me of a "poor mans IS300/Altezza".

Build looks good, I'm hoping thee are updates/vids.

WanganRunner · 08-19-2011, 12:30 PM

Primary advantage of this is losing the *awful* subie 5MT gearbox.

Very neat.

Nicelyphe · 08-19-2011, 12:44 PM

Very interesting. Love the fact that something like this is being done local to me for once. Very nice progress, and goodluck with future work. Hope to see her out here at one of the meets next summer!

Corbic · 08-19-2011, 12:45 PM

Quote:

Originally Posted by WanganRunner

Primary advantage of this is losing the *awful* subie 5MT gearbox.

Very neat.

A SR gearbox isn't much better, but it's at least cheaper.

howyfeltersnatch · 08-19-2011, 09:01 PM

lol i am also in for the update... even though i just had it on jack stands the other night

anarchyperf · 08-22-2011, 04:24 AM

Few steps backwards actually... I needed the engine for my sil80 so I pulled it. I have the SR that was in the sil80 but it needs a little help first.

Also, we built the mockup for the subframe but the subframe that I had "professionally built" was not quite up to par. The engine mounts weren't at the right angle and the control arms didn't line up quite right either. Everything bolted up perfect on the mockup though.

04-12-2011, 05:29 AM	#33
anarchyperf Zilvia Member Join Date: Dec 2010 Location: Nazareth, Pa Age: 36 Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	Dash is back in. Custom switch panel installed. Backed the car out of the garage under it's own power last night __________________ www.anarchyperformance.com - Your source for 240sx Performance! https://www.facebook.com/anarchyperformance - Like us on facebook Email: [email protected]

04-12-2011, 07:15 AM	#34
CamryOnBronze Post Whore! Join Date: Oct 2008 Location: MI Age: 35 Posts: 3,913 Trader Rating: (131) Rides Gallery: CamryOnBronze Feedback Score: 131 reviews	Wow, pretty cool! __________________ CamryOnBronze.com

04-12-2011, 01:07 PM	#35
howyfeltersnatch Leaky Injector Join Date: Sep 2010 Location: Easton, Pa Age: 35 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	pics or it didnt happen father craig __________________

04-18-2011, 05:39 AM	#36
anarchyperf Zilvia Member Join Date: Dec 2010 Location: Nazareth, Pa Age: 36 Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	Sorry for the lack of updates but here we go. - I started going through all the wiring jazz and got fed up with tracing all the unwanted wiring so I ripped out all stock wiring in the car and installed a painless fuse block and relocated inside the car. -Mounted the Microtech LT10S and X4 unit in Glove box for easy removal. Even though there's no keys required your not getting very far without the ecu -Added more support to the subframe by welding in some square tubing. Also ordered the Megan racing H brace. -Aligned the car as much as I could -Converted wrx power steering rack to a Manual rack -Drove the car down the road and back __________________ www.anarchyperformance.com - Your source for 240sx Performance! https://www.facebook.com/anarchyperformance - Like us on facebook Email: [email protected]

04-21-2011, 06:20 AM	#41
anarchyperf Zilvia Member Join Date: Dec 2010 Location: Nazareth, Pa Age: 36 Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	Here are some updated photos finally outside the garage After prodrive drop springs the front sits at about stock height Microtech LT10s and X4 installed in glove box Rocker Arm Stoppers Installed __________________ www.anarchyperformance.com - Your source for 240sx Performance! https://www.facebook.com/anarchyperformance - Like us on facebook Email: [email protected]

04-04-2011, 12:50 PM	#31
unpaintedhatch Leaky Injector Join Date: Mar 2011 Location: AZ Posts: 90 Trader Rating: (0) Feedback Score: 0 reviews	Fuck yeah this is the things i like to see good shit guys!!!!! two thumbs up

04-04-2011, 09:19 PM	#32
Catch240 Zilvia Member Join Date: Dec 2006 Location: Delray Beach, FL Age: 35 Posts: 186 Trader Rating: (5) Feedback Score: 5 reviews	this is bad-ass I may have to come by either in my 240 or my bugeye subaru....hmmm

04-21-2011, 01:17 PM	#45
howyfeltersnatch Leaky Injector Join Date: Sep 2010 Location: Easton, Pa Age: 35 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	P.s mine's bigger __________________

04-21-2011, 01:21 PM	#46
angeldunk707 Zilvia Member Join Date: Oct 2008 Location: S.F. Bay Area, CA Age: 31 Posts: 258 Trader Rating: (8) Feedback Score: 8 reviews	you just said what i said...in a different way. and with 375hp to the rear wheels with the combination of clutch kicking and ebrake entries (not launching)...the axles will snap no matter who the driver is. 95 impreza axles will SNAP under the power im putting to them. __________________ PowerPlenty RWD SR20DET/Impreza GC8 Build:http://imgur.com/a/7KDa1#0

04-22-2011, 10:33 AM	#50
camaro379ss Zilvia Junkie Join Date: Mar 2011 Location: Indianapolis, IN Posts: 363 Trader Rating: (4) Feedback Score: 4 reviews	This is kinda like those random obscure cars that are pretty cool to see done once. Like there was an fd with a sr20 in it at a car show I went to once before. Looks Good. __________________ 1991 Nissan B13 Sentra sr20det 300whp/1991 Nissan S13 240sx sr20det ~260whp

05-06-2011, 06:46 PM	#51
anarchyperf Zilvia Member Join Date: Dec 2010 Location: Nazareth, Pa Age: 36 Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	Quick glance at the new subframe under construction __________________ www.anarchyperformance.com - Your source for 240sx Performance! https://www.facebook.com/anarchyperformance - Like us on facebook Email: [email protected]

05-26-2011, 03:47 AM	#52
white-coupin Banned from the Marketplace Join Date: Mar 2010 Location: cincy Age: 31 Posts: 80 Trader Rating: (4) Feedback Score: 4 reviews	any complications with this swap anything needed more information on what needed to be done

08-18-2011, 10:13 PM	#54
anton1o Zilvia Junkie Join Date: Jul 2008 Location: Melbourne, Australia Age: 35 Posts: 333 Trader Rating: (0) Feedback Score: 0 reviews	Any more progress on this? Its been a few months now __________________

08-19-2011, 05:40 AM	#55
Corbic Post Whore! Join Date: Jul 2005 Location: US Age: 37 Posts: 8,027 Trader Rating: (8) Feedback Score: 8 reviews	Reminds me of a "poor mans IS300/Altezza". Build looks good, I'm hoping thee are updates/vids.

08-19-2011, 12:30 PM	#56
WanganRunner Nissanaholic! Join Date: Mar 2005 Location: DC Metro Area Posts: 1,655 Trader Rating: (1) Feedback Score: 1 reviews	Primary advantage of this is losing the awful subie 5MT gearbox. Very neat. __________________ SELL ME CLEAR ZENKI CORNERS: http://zilvia.net/f/wanted-buy/40034...rs-junyan.html

08-19-2011, 12:44 PM	#57
Nicelyphe Zilvia Addict Join Date: Jan 2010 Location: PA Posts: 918 Trader Rating: (16) Feedback Score: 16 reviews	Very interesting. Love the fact that something like this is being done local to me for once. Very nice progress, and goodluck with future work. Hope to see her out here at one of the meets next summer!

08-19-2011, 09:01 PM	#59
howyfeltersnatch Leaky Injector Join Date: Sep 2010 Location: Easton, Pa Age: 35 Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	lol i am also in for the update... even though i just had it on jack stands the other night __________________

08-22-2011, 04:24 AM	#60
anarchyperf Zilvia Member Join Date: Dec 2010 Location: Nazareth, Pa Age: 36 Posts: 194 Trader Rating: (1) Feedback Score: 1 reviews	Few steps backwards actually... I needed the engine for my sil80 so I pulled it. I have the SR that was in the sil80 but it needs a little help first. Also, we built the mockup for the subframe but the subframe that I had "professionally built" was not quite up to par. The engine mounts weren't at the right angle and the control arms didn't line up quite right either. Everything bolted up perfect on the mockup though. __________________ www.anarchyperformance.com - Your source for 240sx Performance! https://www.facebook.com/anarchyperformance - Like us on facebook Email: [email protected]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode