|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
|
Thread Tools | Display Modes |
06-26-2015, 12:44 PM | #1 |
Join Date: Jun 2011
Location: Baltimore, MD
Age: 31
Posts: 18
Trader Rating: (0)
Feedback Score: 0 reviews
|
FS/FT 1990 GTU RX7 with Built LS1/T56
Year: 1990
Make: Mazda Model: RX-7 Price: $15000 Mileage: 1000 Private or Dealer Listing: Private Listing Location (State): PA Color: Red Transmission: Manual Drivetrain: Rear Wheel Drive I'm up in the air about selling my car, but I'm not really sure what it's worth. I'm not in a rush, but she just sits in the garage and I could use the space for a new toy. If someone else wants to enjoy it, why not?! I didn't do the original swap, but you can follow the swap at the link below: http://www.norotors.com/index.php?topic=8747.0 Since the swap, the motor has been replaced and has about 1000 miles on it. It is still an LS1, but has been bored .01" over, with K1 rods, Wiseco pistons, and Clevlite bearings. It also has the basic upgrades like LS7 lifters, Ford Red Top injectors, ported LS6 oil pump, LS2 timing chain and gear. As far as other engine mods: MS3 Cam Ported 243 Heads with .650 springs Fast 90 Intake 90mm TB JTR 1 3/4" Headers The car currently has 2.5 sets of wheels. A set of street tires, like you see in the build thread, as well as the bronze 5Zigens with Nitto NT555s up front and NT05Rs in the back. I can also include a set of Jeep wheels wrapped in Mickey Thompson slicks like you see in the picture at the track. They have 4 passes on them. The car does currently have 2 dents. One in the rear because of a neighbor and one on the driver side, while parked in Ocean City. I haven't gotten them repaired because they haven't bothered me, but I can before the car is sold. I have no idea what it's actually worth, but I was told to post it for $15k OBO. Again, I really don't know what it's worth. I'm not in a rush to sell it, but I am motivated. If you are interested, make an offer and we can go from there. Located in Philly, PA For more pictures, PM me or text 410-three82-09three4 and I'll gladly send whatever you'd like to see. TL;DR: Below is a complete list of what the car currently has Engine/Trans 98 ls1 bored .25" over with 2000 t56 Stock compression wiseco pistons K1 rods All bearings replaced with clevelite Magic stick 3 cam Manley push rods Fast 90 intake 90mm throttle body P&P'd 243 heads Ian's Screemin engine mounts Ronin trans mount T2 diff 1 3/4" JTR long tube headers SVT red top injectors Suspension Stance GR+ Coilovers Racing Beat front sway bar Mazdatrix adjustable end links Granny's sway bar spacers Energy suspension bushings throughout S4 lower control arms MMR camber links Mazdatrix camber bar Interior/Exterior MoMo Champion steering wheel NRG 2.0 carbon quick release hub Sparco Junior seats Simpson 4 point harness Pioneer Avic d3 w/nav 5Zigen FN01RC with Try Harder center caps 17x8.5 + 35 fronts 17x10 + 25 rears |
Sponsored Links |
06-26-2015, 12:46 PM | #2 |
Join Date: Jun 2011
Location: Baltimore, MD
Age: 31
Posts: 18
Trader Rating: (0)
Feedback Score: 0 reviews
|
Forgot to specify, I'm not interested in trading for another swap car. I'd prefer cash and the garage space, but if you have something stock or stock-ish worth about the same, I'd be willing to trade.
|
06-26-2015, 01:33 PM | #4 |
Join Date: Jun 2011
Location: Baltimore, MD
Age: 31
Posts: 18
Trader Rating: (0)
Feedback Score: 0 reviews
|
It's making 407whp on a mustang dyno with drag radial on. It could use a new tune to pull another 50whp out of it, as I'm not convinced they actually tuned it with the PnP'd heads. Pretty sure they did a dyno run and took my money, but it runs well enough now that I haven't gotten it retuned.
|
06-26-2015, 01:41 PM | #6 |
Join Date: Jun 2011
Location: Baltimore, MD
Age: 31
Posts: 18
Trader Rating: (0)
Feedback Score: 0 reviews
|
haha Thanks for the kind words! If I keep the car, it's going to end up running 9s with an auto trans and a huge shot of nitrous. It shouldn't have any issues running 10s as it sits.
|
06-26-2015, 02:52 PM | #9 | |
Zilvia FREAK!
Join Date: Mar 2008
Location: Chicago Il
Age: 36
Posts: 1,367
Trader Rating: (0)
Feedback Score: 0 reviews
|
Quote:
0-fuck your life under 2 sec's lol haha |
|
06-29-2015, 10:05 AM | #10 |
Join Date: Jun 2011
Location: Baltimore, MD
Age: 31
Posts: 18
Trader Rating: (0)
Feedback Score: 0 reviews
|
Here's a quick rev video I did. Only took it to 5200rpm as I live in downtown philly and didn't wanna wake the neighbors
https://www.youtube.com/watch?v=SFZ9rskfEKA |
Bookmarks |
Tags |
fc3s, lsx, rwd, rx7, swapped |
Thread Tools | |
Display Modes | |
|
|