180sx kouki-ish style vq35hr swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

terry_240sx · 12-04-2013, 12:12 PM

hey guys. been lurking this forum for a few years and finally decided to make a build thread.

started with an s13 given to me as a hand-me-down from my bro. don't really have too many early on pictures of it, but here it is about to be painted.

terry_240sx · 05-06-2014, 02:22 PM

spent a lot of time working on the bumper and fender fitment, then eventually primered/painted it rustoleum white.

got some kouki tail lights for cheap so i had to try those on. cracked right side no lock and creased garnish though

then right back off.

then paint. sprayed on a gallon of rustoleum white thinned out with mineral spirits.

terry_240sx · 05-06-2014, 02:52 PM

somewhere between the painting stages, i turbo'd the ka with the basic sr20 stuff. it was an awesome setup looking back at it. this was my favorite stage of the car so far. went back to stock fenders and polished the rota's also.

then i thought the 326 wing was the most badass thing ever so i got one along with the rps13 kevlar panel and filled the rear marker holes and antenna.

then i tapped a mount of dirt fooling around 1 too many times and the bumper was destroyed. failed a chassis harness tuck, ruined the car and left it like this for a while.

lethanh93 · 05-06-2014, 02:58 PM

Sucks you got to leave it but looking clean

Sent from my Nexus 4 using Tapatalk

terry_240sx · 05-13-2014, 07:33 PM

got it all back together and running good. then moved to georgia and drove it around like this for a while.

then the filter popped off and fried the motor.

terry_240sx · 05-13-2014, 08:36 PM

so while the motor was out i filled some of the intercooler pipe holes

then this showed up.

quick test fit with ebay mounts

cut hood skeleton for better intake manifold fitment.

crappy pics of header fitment.

shortened shifter and bolted that together also. might cut it even shorter since it's back out.

[/URL]

WhiteGLX · 06-25-2014, 07:47 AM

what did you do about the starter clearance at the steering rack?

motoman159 · 09-20-2014, 09:01 AM

Hell yeah man looks nice. Should sound good too.

12-04-2013, 12:12 PM	#1
terry_240sx Leaky Injector Join Date: Jun 2011 Location: georgia Age: 28 Posts: 124 Trader Rating: (1) Feedback Score: 1 reviews	180sx kouki-ish style vq35hr swap hey guys. been lurking this forum for a few years and finally decided to make a build thread. started with an s13 given to me as a hand-me-down from my bro. don't really have too many early on pictures of it, but here it is about to be painted.

06-25-2014, 07:47 AM	#7
WhiteGLX Zilvia Addict Join Date: Jan 2003 Location: Baltimore, MD Age: 37 Posts: 872 Trader Rating: (7) Feedback Score: 7 reviews	what did you do about the starter clearance at the steering rack? __________________ *NASA HPDE Instructor*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-06-2014, 02:22 PM	#2
terry_240sx Leaky Injector Join Date: Jun 2011 Location: georgia Age: 28 Posts: 124 Trader Rating: (1) Feedback Score: 1 reviews	spent a lot of time working on the bumper and fender fitment, then eventually primered/painted it rustoleum white. got some kouki tail lights for cheap so i had to try those on. cracked right side no lock and creased garnish though then right back off. then paint. sprayed on a gallon of rustoleum white thinned out with mineral spirits.

05-06-2014, 02:52 PM	#3
terry_240sx Leaky Injector Join Date: Jun 2011 Location: georgia Age: 28 Posts: 124 Trader Rating: (1) Feedback Score: 1 reviews	somewhere between the painting stages, i turbo'd the ka with the basic sr20 stuff. it was an awesome setup looking back at it. this was my favorite stage of the car so far. went back to stock fenders and polished the rota's also. then i thought the 326 wing was the most badass thing ever so i got one along with the rps13 kevlar panel and filled the rear marker holes and antenna. then i tapped a mount of dirt fooling around 1 too many times and the bumper was destroyed. failed a chassis harness tuck, ruined the car and left it like this for a while.

05-06-2014, 02:58 PM	#4
lethanh93 Leaky Injector Join Date: Dec 2013 Location: California Age: 28 Posts: 62 Trader Rating: (5) Feedback Score: 5 reviews	Sucks you got to leave it but looking clean Sent from my Nexus 4 using Tapatalk

05-13-2014, 07:33 PM	#5
terry_240sx Leaky Injector Join Date: Jun 2011 Location: georgia Age: 28 Posts: 124 Trader Rating: (1) Feedback Score: 1 reviews	got it all back together and running good. then moved to georgia and drove it around like this for a while. then the filter popped off and fried the motor.

05-13-2014, 08:36 PM	#6
terry_240sx Leaky Injector Join Date: Jun 2011 Location: georgia Age: 28 Posts: 124 Trader Rating: (1) Feedback Score: 1 reviews	so while the motor was out i filled some of the intercooler pipe holes then this showed up. quick test fit with ebay mounts cut hood skeleton for better intake manifold fitment. crappy pics of header fitment. shortened shifter and bolted that together also. might cut it even shorter since it's back out. [/URL]

09-20-2014, 09:01 AM	#8
motoman159 Zilvia Member Join Date: May 2013 Location: central florida Posts: 151 Trader Rating: (0) Feedback Score: 0 reviews	Hell yeah man looks nice. Should sound good too.