Na Ka Faq - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mrmephistopheles Na Ka Faq 09-29-2005, 04:21 PM

Breezy KA24-E Type:2398cc EFI SOHC... 09-29-2005, 08:45 PM

theicecreamdan my throttle bodies came in... 09-30-2005, 01:46 PM

RBS14 There's some reading material... 10-09-2005, 11:53 AM

RBS14 I did get it dyno'd. Peak... 10-11-2005, 10:12 AM

Jeff240sx I'll do this but once. ... 10-11-2005, 04:34 PM

eastcoastS14 Im beginning to think a lot... 10-13-2007, 05:59 PM

RBS14 Companies that make cams for... 10-20-2005, 01:03 AM

wangan_cruiser [/QUOTE] The highest hp N/A... 05-08-2006, 06:52 PM

Solarian Can you plz post a close up... 10-27-2005, 04:40 PM

theicecreamdan http://www.drysump.com/pan16.h... 11-08-2005, 10:40 PM

theicecreamdan http://www.amazon.com/exec/obi... 11-09-2005, 11:57 AM

infinitexsound for those serious ppl, a... 11-15-2005, 08:38 PM

drifting.8 what the hell are u posting... 10-13-2007, 03:19 PM

BigVinnie I also wanted to add that... 12-09-2005, 06:54 PM

SicBastard What's the bore on those... 03-20-2006, 03:59 PM

RBS14 50mm induction diameter and... 03-20-2006, 05:51 PM

Sliding Ninja starting up a rebuilt ka24de... 04-22-2006, 05:37 PM

stinky_180 put a few drops or a cap full... 04-25-2006, 02:06 AM

[HK]240sx I am planning on building the... 05-03-2006, 02:58 PM

RBS14 they suck. Get rid of them. ... 05-03-2006, 08:22 PM

ms!3 so you only got a coupe of... 05-08-2006, 05:33 PM

RBS14 there's 95% of the power... 05-08-2006, 06:34 PM

FRpilot isnt that suppose to be the... 05-08-2006, 07:24 PM

ms!3 id like to see the dyno on... 05-08-2006, 08:28 PM

tre Those baja's if they were... 05-08-2006, 08:28 PM

xamS14 thats awesome. i want ITBS... 05-09-2006, 03:15 AM

tre Toda sells 43mm for 250 for... 05-10-2006, 06:44 PM

wangan_cruiser post more info about NA's!... 05-16-2006, 02:08 AM

tre just wait till i get my build... 05-16-2006, 08:22 AM

ryan hagen im pretty sure those baja... 05-22-2006, 10:40 PM

bouncin_180 ok i got a question ... how... 06-11-2006, 10:02 PM

Blackhat You don't have to use a VR... 02-06-2007, 12:55 PM

ranisron most high comp pistons for... 06-12-2006, 07:16 AM

bouncin_180 whats stock compression for a... 06-12-2006, 02:06 PM

tre You can walk into any piston... 06-12-2006, 05:03 PM

irritatedmax the only company i have seen... 06-15-2006, 11:27 PM

articdragon192 The SOHC cam doesnt fit the... 06-20-2006, 07:53 PM

tre When i'm done. I'll be over... 06-21-2006, 11:29 AM

irritatedmax spread the love, what is your... 06-22-2006, 10:58 AM

tre You want reliability. I'd... 06-23-2006, 11:22 AM

BlueBucket Posted this a while back with... 07-17-2006, 06:38 PM

TURBI So what are your n/a ka24... 08-07-2006, 03:11 AM

articdragon192 7800 rpms is kinda dangerous... 08-07-2006, 12:15 PM

TURBI I was waiting for the rev... 08-07-2006, 02:14 PM

ZenkiSilvia Hrmm 08-07-2006, 03:29 PM

shayrgob240 doesn't make any sense either... 09-06-2006, 09:35 PM

HKSdrift3r As for the ITB's, i'd love to... 08-08-2006, 02:18 PM

theicecreamdan e bay 10-12-2006, 11:13 AM

RephaYAH wats fellas newbie here I'm... 08-21-2006, 04:56 PM

ranisron 7800 is wayyyyyyyyyy too high... 09-07-2006, 09:30 PM

TURBI So my tach must not be so... 09-10-2006, 04:10 AM

HKSdrift3r contact Thomas Knight at... 10-02-2006, 06:40 PM

TurboDaytona question, What about building... 10-07-2006, 03:54 PM

matt4pl a plenum for ITB's is a... 10-07-2006, 10:57 PM

RoyalFlush i know this is probably a... 10-07-2006, 11:01 PM

TURBI Maybe something like this... 10-11-2006, 02:21 PM

Iceman00 Cams decide were the power is... 10-16-2006, 08:49 PM

BBSilvia i just got a 89 240. its... 11-26-2006, 04:00 PM

ms!3 lol i have fallin in love... 11-26-2006, 05:07 PM

TurboDaytona are there any final results... 12-01-2006, 05:25 PM

ms!3 yea id kinda like to see dyno... 12-10-2006, 06:55 PM

tre I'm running ona weaker... 12-18-2006, 12:07 PM

MadScientist OK... for some odd reason I... 01-15-2007, 11:42 AM

nissandr1ft Im running an 3" SR downpipe... 01-15-2007, 08:03 PM

sil80forme i will have to second... 01-26-2007, 01:14 PM

MadScientist OK so that is confirmed as... 01-26-2007, 01:40 PM

sil80forme huh!!! are u positve it... 01-26-2007, 02:24 PM

ms!3 so question about stand... 01-26-2007, 02:16 PM

sil80forme u are correct, in order to... 01-26-2007, 02:27 PM

ms!3 meh alright, i figured id... 01-26-2007, 05:04 PM

Iceman00 I'm pretty Sure the title... 02-12-2007, 01:26 PM

ms!3 how is talking about ms going... 02-12-2007, 02:30 PM

Iceman00 48, 49, 52, and post 59. 02-12-2007, 04:20 PM

ms!3 merr.... i can see what your... 02-12-2007, 06:01 PM

Iceman00 Some one did this on... 02-13-2007, 10:35 AM

Iceman00 Cam it. And don't do the... 02-12-2007, 10:52 PM

ms!3 248/248 is a pretty cool... 02-13-2007, 02:12 PM

Iceman00 using 248/248 is said to ... 02-13-2007, 03:37 PM

ms!3 well ive got an s13 and... 02-13-2007, 05:57 PM

Iceman00 There is now a thread on... 02-17-2007, 02:12 PM

shinrekka Anyone running the nismo R4... 02-27-2007, 05:48 PM

SLEEPERracer im thinking about picking up... 03-14-2007, 02:49 AM

sav180 crower makes good cams ... 03-14-2007, 10:57 AM

sav180 http://atomicspeedware.com/cam... 03-14-2007, 10:58 AM

sav180 im gettin my block done now... 03-14-2007, 11:00 AM

Ameer Question is, will an N/A KA... 03-19-2007, 09:33 PM

Ameer I believe that it might 11.9... 03-19-2007, 09:36 PM

SpdElemts Hey guys i have a very quick... 04-27-2007, 12:56 AM

Iceman00 Just Had My KA Dynoed Intake... 05-18-2007, 10:33 PM

alexkosheck What ECU are you running? ... 06-07-2007, 03:04 PM

Iceman00 I'll tell you this, The dyno... 06-08-2007, 06:27 PM

swayray what kind of dyno was that... 06-08-2007, 06:44 PM

More replies below current depth...

sav180 efi specailist make custom... 11-13-2007, 06:50 AM

sav180 Shiggz180... 11-13-2007, 07:00 AM

sav180 you should check out pdm... 11-13-2007, 07:04 AM

Shiggz180 try n spend a extra 400 n get... 11-23-2007, 02:18 AM

KA240SX808 How would the Wiseco... 01-28-2008, 11:32 PM

17ndriftn Jus get electric cut outs..... 10-14-2009, 12:21 AM

sideview_180sx since you have more... 05-28-2007, 11:45 PM

shinrekka wow all these people on this... 05-29-2007, 10:07 PM

Iceman00 For the Record, why didn't... 06-08-2007, 06:29 PM

swayray oh yeah.. i mean rear hub... 06-09-2007, 12:28 AM

Iceman00 I'm hoping for 155whp After... 06-10-2007, 05:18 PM

infinitexsound there needs to be more... 07-15-2007, 12:59 AM

SexPanda I guess theres some kind of... 07-15-2007, 01:26 AM

infinitexsound what it is, is a secondary... 08-02-2007, 07:35 PM

2_fast_240 And its acually on all s13s,... 08-03-2007, 02:11 AM

2_fast_240 Whoever neg reped me on this... 08-10-2007, 02:40 AM

Iceman00 Best way to tell if your cat... 09-01-2007, 07:04 PM

DALAZ_68 ok heres my situation...i... 10-11-2007, 02:02 PM

bntmoore if i was you i would just... 10-13-2007, 02:25 PM

Shiggz180 you could do ITB's but it... 10-31-2007, 02:41 AM

sav180 EFI Specialist (Powered by... 11-24-2007, 12:11 AM

sav180 thats for the ecu..i didnt... 11-24-2007, 12:13 AM

NemeGuero Can we get a mod to clean... 01-28-2008, 12:14 PM

infinitexsound longer duration less lift,... 02-04-2008, 12:51 PM

sav180 hmm i would say it depends on... 01-29-2008, 04:41 PM

twistedlanes For you guys running itb... 02-14-2008, 07:18 AM

KA240SX808 Most run open 02-19-2008, 10:25 PM

svensko Everyone talks about the head... 02-28-2008, 08:58 AM

KA240SX808 ^From what I've read is that... 03-01-2008, 01:17 AM

project-D180 do anyone kno how much it... 04-13-2008, 11:20 PM

project-D180 is anyone runnin je 11:0:1... 04-13-2008, 11:21 PM

KA240SX808 ^Thats news to me, I thought... 04-14-2008, 12:06 AM

project-D180 yea they ben out for a... 04-14-2008, 02:02 PM

a_ahmed any updates on this oh so... 06-29-2008, 07:11 AM

joshy240sxxx whats the most hp you can get... 06-29-2008, 11:20 PM

project-D180 no one really knows yet..but... 06-30-2008, 10:27 PM

project-D180 90 pistons,eagle... 06-30-2008, 10:35 PM

TheJerk factory cams are fail. Crower... 09-05-2008, 06:57 PM

fuk240sx Did you ever actually do this... 03-20-2009, 12:36 PM

allmotoref will a ka24e crank fit in my... 07-12-2008, 09:17 PM

project-D180 block is... 07-13-2008, 10:20 AM

Bigsyke ^^^I would keep it. Others... 07-13-2008, 10:47 AM

project-D180 ight thanks for the tid... 07-14-2008, 09:24 PM

Bigsyke Wait I see your purge lines... 07-15-2008, 03:52 PM

project-D180 that pic was jus for... 07-16-2008, 09:03 PM

project-D180 motor is all done jus gotta... 07-16-2008, 10:15 PM

Katsumbhong SOMENDER-SINGH.com - Home... 08-21-2008, 06:46 AM

Mikey213 you need headwork, valve... 09-28-2008, 01:04 PM

project-D180 up and runnin withh 90... 09-28-2008, 09:43 PM

240KAT theres a couple ka stroker... 10-10-2008, 09:36 AM

BlackRedX I thought boring out the KA... 12-28-2008, 06:54 PM

Iceman00 not true. The crank is FCW,... 01-13-2009, 12:36 PM

project-D180 what u guys think rom tune or... 10-11-2008, 10:15 PM

mondojackal just get a JWT tune. it's not... 10-12-2008, 01:22 AM

project-D180 get dat @#%$% out of... 10-12-2008, 08:20 AM

project-D180 well im aimin for that 200... 10-12-2008, 08:32 AM

project-D180 ...woould bc 264's work good... 10-12-2008, 08:34 AM

project-D180 ?? any one?? 11-13-2008, 10:06 PM

project-D180 curious..wil bc 264s work... 11-16-2008, 12:28 AM

fuk240sx not sure 01-18-2009, 01:16 AM

ninja_star i got a twim cam harness... 12-30-2008, 12:50 AM

ZenkiKid youre supposed to cut the... 01-14-2009, 11:03 AM

Phill Yeah, You have to get your... 02-15-2009, 09:04 AM

project-D180 hmm anything new in the n/a... 03-16-2009, 06:21 PM

project-D180 *******yea stil workin on it... 03-20-2009, 06:16 PM

project-D180 dont really care for the idle... 03-20-2009, 06:18 PM

project-D180 it sounds nasty... let me... 03-20-2009, 06:19 PM

fuk240sx Get it tuned and we want dyno... 03-22-2009, 10:10 PM

project-D180 lol...ight.. 03-24-2009, 07:22 AM

ZilviaKid est time of having it tuned?... 03-28-2009, 11:10 PM

project-D180 dont believe the vavles will... 03-29-2009, 01:36 PM

ZilviaKid oh good call, i do believe... 04-01-2009, 10:24 PM

fuk240sx you know you can take ka24e... 04-20-2009, 08:39 PM

kidexpo How much whp will a healthy... 04-03-2009, 08:31 PM

TravisSW Probably just a 10HP increase... 04-03-2009, 09:53 PM

soreballz Everybody, please disregard... 04-04-2009, 07:31 PM

Howlermonkey Some rebello built engine... 04-03-2009, 08:57 PM

kidexpo 10whp??? i remember a... 04-04-2009, 04:46 PM

project-D180 it didnt even take a week to... 04-04-2009, 09:00 PM

project-D180 hmmm wish i knew it was so... 04-21-2009, 10:55 PM

gsxr141 dumb question. are there... 05-09-2009, 06:56 AM

punxva DC sports, Greddy made one... 05-09-2009, 12:32 PM

Bigsyke Xtune, I have it and its... 05-09-2009, 05:53 PM

gsxr141 good stuff, thanks. 05-09-2009, 11:22 PM

gsxr141 after looking around for... 05-11-2009, 02:41 PM

gsxr141 ok, i did alot more searching... 05-15-2009, 07:19 PM

dRift_g0ddess ^^ cool vid man! looks like... 10-06-2009, 07:16 PM

Iceman00 Wow it has been a while, I... 12-29-2009, 11:41 PM

Ichito240 Another Headers question that... 05-21-2009, 08:46 AM

TravisSW DC headers are CARB PENDING... 05-21-2009, 04:14 PM

project-D180 my bad guys ben busy as h@#$... 07-23-2009, 09:52 PM

project-D180 i went over sized je pistons... 07-23-2009, 09:55 PM

project-D180 any other n/a heads in jerzy... 07-23-2009, 09:56 PM

project-D180 she's aliivveee..lol ..just... 08-20-2009, 10:14 AM

dRift_g0ddess so ive read all 7 pages lol..... 09-18-2009, 10:53 PM

let5l1de sr 370cc injectors and a z32... 09-19-2009, 12:50 AM

dRift_g0ddess what maf would u suggest? i... 09-19-2009, 05:48 PM

project-D180 well im runnin a walboro fuel... 09-19-2009, 12:06 PM

project-D180 im lookin into gettin v2 cams... 09-19-2009, 12:07 PM

project-D180 im curios on 0bd1 can you use... 09-19-2009, 12:13 PM

let5l1de If you are OBDII, then you... 09-21-2009, 12:27 AM

WagDatto Quick question related to the... 10-02-2009, 08:02 PM

let5l1de Don't we all wish the foldout... 10-04-2009, 02:52 AM

project-D180 <embed width="600"... 10-06-2009, 01:23 AM

project-D180 its kinda of a crap vid with... 10-06-2009, 01:29 AM

project-D180 http://i259.photobucket.com/al... 10-06-2009, 01:40 AM

project-D180 hell yea its a blast drivin... 10-07-2009, 12:35 AM

J-F(rx-team) I just read the 7 page, im... 10-08-2009, 09:11 PM

project-D180 i would use the fuel pump if... 10-09-2009, 01:19 AM

project-D180 anyone else with a n/a build... 11-10-2009, 03:27 PM

let5l1de My setup is similar to yours... 11-10-2009, 08:49 PM

ManoNegra I'm curious to see how well... 11-18-2009, 10:25 AM

project-D180 like 2 see how that would run... 11-12-2009, 03:51 AM

project-D180 1 thing i kno kills the ka... 11-18-2009, 11:31 AM

ELF240 looking to build a motor 12-01-2009, 11:48 PM

project-D180 if it was that damn easy we... 12-03-2009, 12:54 AM

articdragon192 Oh hmmm, I never posted up my... 12-12-2009, 12:06 PM

shinrekka no built SOHC motors? 12-19-2009, 09:29 AM

speedfreak90 i just want to say thanks for... 12-24-2009, 10:10 AM

project-D180 what route r u takin?whats ya... 12-24-2009, 02:15 PM

smbonn2005 Well I fail at just now... 01-21-2010, 02:26 AM

shinrekka Im gathering up the bits and... 01-23-2010, 06:47 AM

sav180 they sould have valve relief... 02-07-2010, 12:52 PM

smbonn2005 put clay in the cylinder,... 02-07-2010, 12:54 PM

iwannaslyde ^really? what kinda clay are... 02-15-2010, 01:45 PM

smbonn2005 Don't quote me on this but... 02-15-2010, 07:21 PM

PoorMans180SX Just wanted to let you know... 02-15-2010, 07:53 PM

smbonn2005 Yeah they have some awesome... 02-16-2010, 11:50 AM

jonnybonds84 I thought I would post this... 02-25-2010, 06:15 PM

smbonn2005 Awesome find! thanks for... 02-25-2010, 09:17 PM

project-D180 dyno #s comin soon..school... 04-08-2010, 12:53 PM

smbonn2005 I'm still waiting to get my... 04-08-2010, 01:19 PM

project-D180 http://i259.photobucket.com/al... 04-15-2010, 01:39 PM

project-D180 will be postin more soon once... 04-15-2010, 02:00 PM

smbonn2005 Whats been done to that... 04-15-2010, 02:05 PM

project-D180 je 11.0.1 pistons,eagle... 04-16-2010, 04:33 AM

project-D180 a/f and torque # didnt print... 04-16-2010, 04:39 AM

project-D180 its not bad for the most part 04-16-2010, 04:40 AM

project-D180 what u guys think??if i had... 05-15-2010, 10:52 AM

project-D180 ???no more guy's with n/a... 05-23-2010, 05:39 PM

comatoseculture Nothing in the works yet,... 08-11-2010, 03:23 PM

project-D180 unfortunately no... had some... 08-14-2010, 06:36 AM

Durty Anyone spray on top of their... 09-03-2010, 11:35 PM

ryan hagen saw it at crandon, dosnt... 09-07-2010, 06:24 PM

ryan hagen this one threw a rod, there... 09-07-2010, 06:30 PM

fckillerbee ^^^ any video clip of this in... 09-07-2010, 06:43 PM

ryan hagen im sure you can find video, i... 09-07-2010, 08:25 PM

smbonn2005 Hey if any of you need high... 09-28-2010, 08:11 AM

project-D180 i take it your going turbo? 09-29-2010, 10:20 AM

pink godzila 97 KA manual ECU number J6?... 01-03-2011, 10:38 AM

project-D180 whats up guys?anyone with a... 01-13-2011, 09:11 AM

gsk8087 hey everyone i jus bought a... 04-06-2011, 10:35 PM

project-D180 u have to cross a couple of... 04-10-2011, 05:44 PM

ryan hagen https://fbcdn-sphotos-a.akamai... 05-16-2011, 10:51 PM

KA240SX808 There probably the same 171mm... 06-01-2011, 09:47 PM

nate1 whats up D havnt talk to u in... 07-14-2011, 12:46 PM

project-D180 im workin on body work now on... 07-17-2011, 08:16 AM

project-D180 plannig on swappin out the... 07-17-2011, 08:21 AM

nate1 im not tuning shit lol, that... 07-19-2011, 08:41 AM

wacko2 im planing goin ka na power... 07-30-2011, 06:52 PM

nate1 u wont, not with out a fully... 08-23-2011, 10:41 PM

NoPistons! nvm. msglength. edit. 09-04-2011, 01:19 PM

ryan hagen https://fbcdn-sphotos-a.akamai... 09-28-2011, 08:14 PM

project-D180 niice. are they custom or are... 09-28-2011, 10:38 PM

NoPistons! Look at the domes on those... 09-29-2011, 02:57 AM

ryan hagen the dates scribed on stuff... 09-29-2011, 07:17 AM

ryan hagen reply from JE: "The cylinder... 09-29-2011, 11:29 AM

NoPistons! What about the crank? Full... 09-29-2011, 01:13 PM

ryan hagen truck crank, its been... 09-29-2011, 01:18 PM

ryan hagen the closer brown crank is a... 09-29-2011, 09:33 PM

project-D180 anyone else with a n/a... 11-06-2011, 11:09 PM

nate1 mine will be up very soon... 11-09-2011, 01:29 PM

project-D180 whAT cams??stock 11-09-2011, 06:23 PM

nate1 stock for now little bit down... 11-11-2011, 10:53 PM

project-D180 thinking of mild build with... 11-09-2011, 06:24 PM

nate1 all depends on what u wana do... 02-18-2012, 01:27 PM

omii27 i need help i just baught a... 11-11-2011, 02:09 AM

rob22 aslong as the injector is red... 11-11-2011, 02:34 AM

omii27 thanx man......would u happen... 11-11-2011, 10:00 AM

omii27 How can i tell if my cams are... 11-11-2011, 04:39 PM

project-D180 oooh yea.. i seen them the... 11-13-2011, 11:05 PM

nate1 they got dyno charts on the... 11-14-2011, 06:35 AM

project-D180 But the dyno #'s was on a... 11-22-2011, 10:26 PM

nate1 those #s had bolt ons and... 11-28-2011, 08:12 PM

nate1 the #s are still like 10... 11-28-2011, 08:17 PM

project-D180 i thought it was awesome.it... 11-29-2011, 08:02 PM

nate1 do u have a dyno chart before... 11-29-2011, 08:08 PM

drivens13 Looking to do a rebuild on my... 12-05-2011, 07:38 PM

project-D180 lil crank work..i knived... 12-05-2011, 09:06 PM

Chubii im looking into building up... 02-17-2012, 03:18 PM

project-D180 ooh dyno pic on page 8 nate 03-23-2012, 01:24 PM

ME GUSTA can anyone confirm that this... 03-21-2013, 07:33 PM

ME GUSTA might have figured it out. it... 03-21-2013, 07:36 PM

Sleepy_Steve I can confirm that my rear 02... 03-25-2013, 12:15 PM

s14wannabe holy smokers 05-14-2013, 12:52 AM

Scope240sx prpject D180 you have a cool... 12-30-2013, 06:49 PM

Sleepy_Steve I think something is off, or... 08-26-2014, 03:56 PM

Coodsie Not really sure where to post... 11-01-2014, 11:11 PM

Sleepy_Steve Different rods and pistons... 12-09-2014, 12:50 PM

project-D180 scope240sx ,well my project... 01-21-2015, 11:42 AM

95s142jzvvti I've got a fully built ka... 05-29-2015, 11:01 PM

EpikFlyingBrick Replacing a Head Gasket 07-26-2015, 06:41 PM

anti tyler Come on guys, attempting to... 02-23-2017, 04:22 PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode