Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > Specific Topics > Media Forum / Pictures / Videos

Media Forum / Pictures / Videos Forum dedicated to media, such as pictures and videos.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-17-2019, 01:36 PM   #1
David B S12
Zilvia Junkie
 
Join Date: Jun 2008
Location: NOVA (Northern VA)
Posts: 324
Trader Rating: (0)
David B S12 is an unknown quantity at this point
Feedback Score: 0 reviews
s14 Beams 3SGE Swap 240sx 2019 - UPDATED / RECOVERED - David B

its March 2019 and forums still exist

** Redoing this original post - i used facebook links of the pictures and they died. im sorry

I own 3 240's and this is my daily driver , ive daily driven well over half a million miles or more in S chassis's since i got my permit. No savior honda civic, or weekend meets lol, all of it. I have only had some form of a S chassis as means for primary transportation no matter what, thats what I do, ride or die mothaflocka.
The other two S14's being 1j's the beams seemed like a great alternative choice, a couple months research and ordering parts the original swap was completed in 3 days 2 years ago and met my "experimental" budget at about 3000$, it probably costs a but more today or less depending on the market and options for swap parts . I like the iron block, timing belt, high compression dual vvti & 6 speed trans for the price. They are picky with fuel / intake / speed sensor and other quirky things although the Altezza link / ITbs or supercharger is a common options (auto motor is lower compression for turbo and boost )

Ka's are expensive now, I can't get over it. I hate looking at them and working on them, sure they spin the tires but really they are not a very fun motor to enjoy driving with, maybe I have just grown out of them. Sr20s are all crusty and expensive, etc, they can't handle accidents like overheating and also like the KA, timing chain which makes repair a pita, I hate removing front covers with a passion especially nissan stuff. I wanted AC and enough power to pass people on the highway. Then maintain good fuel mileage and have some good times on a back road or two headed out of state. Then drive to work every day all days of the year.. Thats what led me in this direction plus being a unique swap and documenting for the community is always a +1 similar to my original 1jz swapped S12 about a decade ago

A/C works and power steering bolts up, the mounts are modified excessive mounts. The engine has a natural tilt i have removed so the shifter sits at a slight 5 degree angle. Barely noticeable, the shifter location fits well and the oil pan clears the stock swaybar. No subframe issues at all or hood issues. I did install a slim profile water neck on the back of the engine and cleaned up the bypass hose for optimal clearance to set the engine as far back as possible. Fuel is converted from single feed to the 240s return lines but flared to AN. Then aermotive 340 pump & Tomei regulator

The most complex part of the swap is modifying the headers to clear the column but thays common on most swaps anyways. Wiring is not complicated and I use Torque pro to scan codes and view more data. Stock ecu
The engine is so far back and the top end is incredible, it packs a nice healthy punch from 6 to 8k revs (vtak baby), it really shines on back roads and if your good with rev matching and cornering. Tons of extra control with the engine and the revs. The flywheel is an 11 lb toda flywheel , which is a dramatic loss over the original dual mass 32 lb'r. The intake is SO loud. The motor sounds awesome. Consider two resonators and a muffler to dampen the exhaust so you can hear that intake sing and keep the cops off your back

Flip a Ka's power band upside down and throw 50 horsepower at it and this is generally where your at with the beams on stock form. Although my intentions are just to drive from A to B I wasn't necessarily trying to have a 3rd 1jz swap car and did not want an NA sr20 given the nicer quality of the Toyota unit which is superior in my own opinion

Bottom line is this. Rather then complain or deal with stuff you don't like about the market these days, pave your own way and write down some notes for the next guy. If yall want these cars to stay around then finding lil 4 bangers that fit and run nice sometimes is better then a money pit that can't get you down the road 100k without just oil changes brakes and tires. Not all cars should be intended to be drift cars (coming from a well seasoned veteran) so consider restoring and dailying the car you like so you can enjoy it every day rather then keep it locked up in a garage to be sold because its so valuable. Some day there will be no more Ka's and Sr's that are affordable for the regular enthusiast.


anyways heres a quick brush from what i can remember before i forget. sorry if its not as Buildish as it was before. now all my photos are on flickr

i Paid 900$ for the beams swap - nobody wanted them early 2019 - i always be peepin them 4 cylinder JZ's hiding in the corner of the importer my whole car life, begging for a home


52993357_10157000446584556_7360219690615963648_o by david bellomo, on Flickr

heres the excessive motor mounts, they did not fit , i had to modify the brackets and the mounts to actually even bolt the engine up. i provided information to xcessive and got a pat on the back. thanks guys


46443416_10156767308719556_8208841057199194112_o by david bellomo, on Flickr

46458088_10156767308604556_8449863347561562112_o by david bellomo, on Flickr

brackets slotted and dropped the drivers side down like an inch, the trans mount was a slotted 1jz trans bracket


53050751_10157004602439556_31272442861191168_o by david bellomo, on Flickr

ebay celica intake is a good start for the intake


41033322_10156594654579556_497156955731656704_n by david bellomo, on Flickr


40818570_10156594654484556_7280373443969679360_o by david bellomo, on Flickr


various tid bits about parts - ur welcome

battle garage is your friend , they are on ebay too

if your missing a brain box, gs300 is the same. EBayyyyy


50491055_10156918835109556_195797637650186240_o by david bellomo, on Flickr


40406658_10156579485769556_4696233437491625984_o by david bellomo, on Flickr


41111500_10156594653984556_310321325690322944_o by david bellomo, on Flickr

31126 BOOT, CLUTCH RELEASE FORK
31126-14010 1 $16.45
31204 FORK SUB-ASSY, CLUTCH RELEASE
31204-43010 1 $106.83
31210 COVER ASSY, CLUTCH
31210-22150 1 $183.55
31230 BEARING ASSY, CLUTCH RELEASE
31230-53010 1 $50.42
31232A CLIP, RELEASE BEARING HUB
31232-36030 TYPE A:イラストサンシヨウ 1 $2.17
31236B SUPPORT, RELEASE FORK
31236-14010 1 $24.91
31250 DISC ASSY, CLUTCH
31250-53012 1 $164.54
33311W BEARING (FOR INPUT SHAFT)
90363-12004 1 $40.72
90119-08026 *** STD. PART $0.71

16361A BELT, V(FOR FAN & ALTERNATOR)
99364-30780 1 $33.41
44310A BELT, V(FOR VANE PUMP)
Not applicable
88310A BELT, V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY), NO.1
99364-31220 長さ=1220 1 $54.84

11115 GASKET, CYLINDER HEAD
11115-88570



some wire stuff and info

DOWNLOAD THIS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
https://drive.google.com/file/d/1zhd...nGis8F1IS7FJyw



40513321_10156579485529556_4807179404889292800_o by david bellomo, on Flickr



40417726_10156579486234556_8605977020700033024_o by david bellomo, on Flickr


40466568_10156579486354556_3794332318701715456_o by david bellomo, on Flickr

https://www.dorikaze.net/showthread....y_OiyDkpcdanCM

E1, constant power, fused
E8, E10, E16, A6, switched power.
D26, tach, need tach adapter for accuracy/function
B3 and A28 will go to the oxygen sensor (will run without it) but let me know when you get to this. It’ll probably be the very last part of your swap.
All switched wires should be able to run off of your old coil power wire, but I’d recommend using a relay to avoid voltage drop


49525724_10156876181684556_1057875179721457664_o by david bellomo, on Flickr

Maf on the right. Injectors and coils on the left. Ontop of powering the ECU and throttle body that's what was left. The maf power plug also has a alternator plug not pictured. It's on the second row down and the second to last pin from left to right . Needs 12 volts as well. *still needs revision to see if the injector and coils need direct power. This worked for me but I read otherwise the ECU powers them


i used a pickup 22r disk and have the part number (there are two part #'s but this one is IT, go to your local toyota and order. yay)

45193706_10156725751629556_6147545896612528128_o by david bellomo, on Flickr


45221568_10156725751309556_5004779421270278144_o by david bellomo, on Flickr


wix single feed fuel setup - this got me rolling for a year - i switched it up but to stay timeline correct ill still advise this is the cheapest way to get running, the beams asks for 62 psi and this wa s58 - it worked.

50234180_10156907854189556_2898316692381761536_o by david bellomo, on Flickr

UM YEA, they make a radiator for a beams swap, well it is for a hachi roku but who cares, its got to fit


40461148_10156579486484556_3389560311370481664_o by david bellomo, on Flickr


50775365_10156918795769556_8956741347587391488_o by david bellomo, on Flickr

yes , just slot the mounts and then bore out the bushings with a drill bit, i bent the top mounts to secure it in place

53287700_10157011151259556_610949167891611648_o by david bellomo, on Flickr

i used the mishimoto hachi fans and included a mishi fan controller that threads into the radiator

53701942_10157011151154556_4011723475663192064_o by david bellomo, on Flickr


i had 3 days off at work and couple months research and parts ordering, this was the weekend where i tossed it all in and ended up making it happen despite discovering the engine mount issues which set me back a solid 6 hours
BYE KA - NEVER AGAIN


53364393_10157004602759556_1316843917915717632_o by david bellomo, on Flickr

yea thats a plastic roll cart


52977657_10157004602644556_3016517293334069248_o by david bellomo, on Flickr

that moment when you know its gonna work ( i had already pre wired and ran the engine on the stand)


53501965_10157004601859556_4071379420353396736_o by david bellomo, on Flickr


53320720_10157004602074556_5695634041932349440_o by david bellomo, on Flickr


w58 yoke should work on the J160 6 speed- shaftmasters online set me right


53146083_10157011151429556_4117591348607975424_o by david bellomo, on Flickr


53150291_10157011151509556_2857591013617172480_o by david bellomo, on Flickr


so i found this automatic beams altezza down pipe on europe ebay for 50$, shipping was 100$ but i really liked the dual pipes they were easy to weld and configure to get around the steering shaft. this seems to be a popular problem with the beams swap, ur gonna need a welder lol


53077634_10157004604259556_5398663527592361984_o by david bellomo, on Flickr

Maybe i worked @ a muffler shop in my previous life? just kidding but i was really happy with this exaust, dual resonaters highly reccomended to guys that like to hear the engine and not just the exhaust

56786223_10157082161314556_2451049982271160320_o by david bellomo, on Flickr


56922716_10157082161344556_3831874924188794880_o by david bellomo, on Flickr

yea it fits pretty well. i did get the motor further back a tiny bit after this pic.


53018051_10157004601754556_5310702867953221632_o by david bellomo, on Flickr


p0500 speed sensor code removal - convert your 3 wire signal to 2 wire, output to cluster, then cluster to ecu so ecu gets signal. p0500 effects the timing

82159153_10157830064174556_5135727747150118912_o by david bellomo, on Flickr

use any "dead" wires to your advantage, aka the original toyota engine harness on the beams to throw power to the engine bay


82198406_10157830047094556_7906024611333013504_n by david bellomo, on Flickr

tigg'd the a/c lines - wiring is quite simple. screw all that nonsense, run that bish through the triple pressure sensor and cycle the clutch off of that, the beams is eletric throttle so dont forget to power your a/c clutch signal to the power steering pin on the ecu to get some RPM bump, along with triggering your a/c fans if your using the same fan controller as me


67299935_10157363872059556_1558577648135831552_o by david bellomo, on Flickr


67387195_10157363871999556_2297935484795486208_o by david bellomo, on Flickr


67406698_10157363871954556_2586219071297028096_o by david bellomo, on Flickr

AIR FLOW STRAIGHTENER critical, must straighten airflow. use HKS pod or get a straightener. i rivited this in my pipe. guess where i got it "honeycomb"


54520879_10157035970394556_354534676813053952_o by david bellomo, on Flickr

torque pro

Obd2 port install / using Torque App
- here are the pins you need off the ob2 port plug itself - pins -4, 7, 9 ,13 , 16
Pins off obd2 port to Ecu pins
-Pin 4 is ground ( I just used chassis ground )
-7 goes to pin E11 on the Ecu
-9 goes to pin D26 on Ecu
-13 goes to pin D24 on Ecu
-16 goes to pin E16 or E8 (B+)
Bought this obd2 scanner
https://www.amazon.com/gp/aw/d/B011NSX27A/ref=yo_ii_img...
Picked up one of these obd2 ports off eBay https://www.amazon.com/gp/aw/d/B01KF0ZQVC/ref=yo_ii_img...
Then. I downloaded torque app
Note - need to change protocol for the beams Ecu to be recognized
Create a profile and scroll all the way to the bottom were it says "very advanced-elm327"

ATTENTION ATTENTION ATTENTION ATTENTION ATTENTION ATTENTION ATTENTION ATTENTION ATTENTION ATTENTION ATTENTION BELOW IS IMPORTANT

Type in - ATIB 96 \n ATIIA 13 \n ATSH8213F0 \n ATSP4 \n 0100 - exactly how it's typed and spaced then save the profile and your all set should link up to Ecu with no issues


55698651_10157065726544556_7879858562464219136_o by david bellomo, on Flickr


55788320_10157065726579556_7285388136115339264_o by david bellomo, on Flickr

startup video
http://www.youtube.com/watch?v=MEo90QxIOGk
https://www.youtube.com/watch?v=MEo90QxIOGk


checked fuel pressure
http://www.youtube.com/watch?v=KJZFCuVSqv0
https://www.youtube.com/watch?v=KJZFCuVSqv0



YAY! happily ever after - close curtains.

53778714_10157018299579556_1380397807420047360_o by david bellomo, on Flickr




ok, now a year goes by. the beams swap i got was a bad egg. it was consuming a shit load of oil. eventually it started knocking and it threw a bearing on my 3 mile commute home,wow, gay. i have drifted for 10 years beating on cars and never thrown a bearing. i tossed this up as a neglected motor and decided to continue on and source a newer gen beams motor (g3)

i coasted down my street into the driveway where she died

91505287_10158068222079556_4872631137362509824_o by david bellomo, on Flickr


91508609_10158068221544556_4753035019931353088_o by david bellomo, on Flickr

of course i organized everything and collected all the parts for the future since i am a long term car enthusiast, i dont really give up and expect to need these parts later, i did trade that stupid block for a blow off valve. yea boi i got ALL major sensors in the trunk.


91753567_10158068221894556_4848838392932204544_o by david bellomo, on Flickr


my other bitches side to side

91545440_10158068221749556_5709356136025554944_o by david bellomo, on Flickr


got a new engine, blah blah, thanks market. now they cost 1400$

DO YOURSELF A MASSIVE FAVOR AND DITCH THE STOCK DUAL MASS FLYWHEEL, what a load of garbage, it was so looose and you could feel it driving, this toda 11 lb is freaking great!! the original wheel was 32 lbs
peep the slimline bypass, get it if you want to squeeze the engine back like i did, so you dont rub coolant lines on the firewall and give your self headaches later


93770289_10158127522454556_88273672560705536_o by david bellomo, on Flickr

DO YOURSELF A FAVOR AND UPGRADE THE FUEL PUMP, the stock pump sucked!! this aeromnotive 340 made my shit feel way better, i was def running a bit low pressure for a year


94073899_10158138921119556_5549292673522728960_o by david bellomo, on Flickr


with the new engine at work and my car in the driveway i did some matrix shit and managed to get everything lined up. i bought a 37 degree flare tool (not 45 degree brake line) and flared the stock lines to AN, utilizing a tube nut this is a quality way to ditch all rubber hoses and is safe and secure.

i always remove the pan - engine right side up, and replace main seals and thermostat when putting any motor of mine in
i replace the timing belt but not the timing components or water pump.. its a toyota dude. im just a tech of 10+ years whatever dont listen. plus its a hella easy to work on later and check for other actual problems.


92912212_10158101493224556_42579180491112448_o by david bellomo, on Flickr


92755407_10158101493139556_8017581658087620608_o by david bellomo, on Flickr

return style now, much better. i love how i got the K&N adapter and the stock lines 37 degreed flare. that filter is like 10 bucks to change later, GM power steering an adapters are what i used to convert the filter to AN


92572794_10158101492994556_7437629269171240960_o by david bellomo, on Flickr


new motor going in, i had to drive my 7.5 liter f250 for like 2 freagin weeks getting 1mpg

93473302_10158127522519556_8284326348671942656_o by david bellomo, on Flickr





















started a Facebook 240sx beams swap page find it for more info or others interested if u want
-David Bellomo

Last edited by David B S12; 11-24-2020 at 12:26 AM.. Reason: lost images
David B S12 is offline   Reply With Quote
Sponsored Links
 

Bookmarks

Tags
3sge, beams, hell, yea


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™