Almedarj

Okay i'm building my ka to be all motor dd you know bolt ons and some head work i'm looking for quailty parts and i'm not finding to much support for the ka i would really apperciate some help.

BoostedCoupe

na ka's are expansive to build and pretty much worthless. just do a stock sr style turbo setup. t25 370cc side mount etc.

__________________
92 vert converted 5speed and other little things

Almedarj

i'm looking to reach 200 to 210hp to the wheels thats all i really need for a dd

slo_slideways

200-210 at the wheels is gonna be pretty expensive for a KA...

Im building a NA KA and Im hoping for about 190 at the wheels. Forged high comp pistons, ($800 or so), dual exhaust cams, (cost me taco bell), fully rebuilt head and block, block will be be bored .030 over, new valves and springs (a couple hundred for all).

So total Ill be in about just over a grand for parts only, Im doing the block and head work myself so if you have that done thats at least another few hundred for that if you dont have access to machining equipment. Plus fuel management, ECU tuning etc. etc...

After that, Im hoping for 190-195 at the wheels. For over 200 expect to be looking ITB's, full standalone, and some where in the 3k range for around 200 whp.

It can be done, but turbo is gonna be alot cheaper and you can hit 250whp pretty easily...

EDIT: Also, search the forums a bit, this has been covered quite a bit. NA+KA= $$$$$ x pain-in-the-ass

__________________
REPPIN' NORCAL HARDER THAN HERSHEY'S TURTLE SHELL CHOCOLATE SHIZ!!!

OptionZero

u can't get 200rwhp on a KA that's going to be DD'd

The dude with the green zenki (RBsomething was his name) had ITB's and a standalone fuel management system and i don't think he got to 200 w/o a bitch load of work

get an SR or buy a different car

soreballz

210whp and you wanna DD it? You're talking about a KA24DE, not a K24... Ain't happening.

Intake + 3inch exhaust + header + dual exhaust cams + light flywheel + aluminum driveshaft + light wheels = more than enough to have fun with a KA on a day to day basis.

__________________
-Kyle

redpotatoes

You ain't gonna do 200whp without a lot of work and money. For a DD, I would suggest a few bolt-ons and thats it but don't expect big gains.

BoostedCoupe

Like i said just do a t25 turbo set up. You will get 205-210 whp and it will be a reliable dd aslong as you have a good tune.

__________________
92 vert converted 5speed and other little things

Almedarj

okay then so 200 is to much for a ka what are some reallistic numbers i can be seeing with bolt ons and high comp

Almedarj

wow hondas can reach 200hp on 1.6 liters and be a dd why cant we with 2.4 liters and a ass load of work is it because of a poor flowing head thats so wrong to me or is it because of low comp

enkei2k

that what you get for a truck motor...

__________________
Ask enkei2k

xquizitditz

soreballz

Poor head design, poor electronics, and a half balanced crankshaft. Thats why.

__________________
-Kyle

Slo_Slidewayz

^^ What he said...

With every bolt on possible, Im thinking youre looking at about 150-160ish... Add to that some light wieght shiz (wheels, flywheel, 1-piece driveshaft, etc etc) you will have plenty of pick up to fool around with on a day-to-day basis.

Once you bring "high comp" into the mix, thats when it gets really pricey. Fuel management, ECU, tuning, and gas alone are just askin for lots of dollas lol

__________________
Your Ad Here!!

rex2sx

Sorry homie, not true. Its about just as hard. Hondas B18c1 GSR motor will barely make 200 with I/H/E/C, ~180 or 190. All that together with a tune is hitting 3k for a motor thats going to be a pain Dding. So 1.6 cant even touch that, not to mention MOST 1.6s are SOHC. If we were talking about 2.0+ K series thatd be a different story. But since were in nissan well go back to that...

Half balanced crankshaft eh? Why does a big motor have to be built so poorly.? Truck motors should be torquey!

BlackRedX

Its not a truck motor. It was built from the ground up by Nissan of Japan and first appeared in the 240SX as the KA24E in 1988 as a 1989 with, "9.1:1 compression ratio, outputting approximately 150 hp" - Basics > Engine > KA24E - Nissan 240SX Performance Tuning

It didn't appear in a truck until 1990 as the KA24E in the Nissan D21 pickup hardbody. Before that they used the Z24 engine. The KA engines that came in the Altimas and pickups were all made in the U.S.A. until 2001. They have different flow and headwork done to them. In which case the 240SX(only offered in the U.S.A.)was given the "performance" N/A engine. Similiar output on the scale but better flow, overall.


o.o oh yeah. Its tough to get 200whp out of KA either way. for as much money as you're putting into the NA r00t, you might as well just do alittle headwork and put a turbo on the car and run it at like 7psi for 2 months then bump it to 10psi.

The_Doctor

If the KA is a truck motor, the SR is a minivan motor...
Nissan Liberty
Nissan Serena

Look them up.

__________________
Sr's are like an asshole, everyones got one.
KA-T FTW

redsx13

the sr may be a minivan motor but i assure you that the sr20det is not. That would be one hell of a minivan.

redpotatoes

Here we go again, the famous ka-sr battle...

I thought this was discuss and done by now...

Please close this thread, it becomes annoying...

redsx13

My buddy who has raced in multiple drift events and worked for Full Race, actually just droped a ka-t in his car a few months ago. He has raced SR's for years and he really likes his KA. alot of torque and hardly any turbo lag. It is making around 300hp to the wheels with mostly stock internals and a fat turbo.

I say get yourself a big turbo, some injectors, a fmic, a good management system, and have it tuned and you should be good to go.

Almedarj

okay now my my other car its a ka24e i have a sound similar to the timing chain but i can see the lower pulley shake back and forth like a mofo could that just be my eyes and actually be just the chain

The_Doctor

...I said look them up. Both had the sr20det

One hell of a minivan? The sr gets 200 at the crank stock...thats not much.

__________________
Sr's are like an asshole, everyones got one.
KA-T FTW

98s14inaz

Not going to happen...especially with a dd. It's been tried and done to death and most of those who tried gave up and or became broke in the process.

__________________
-Retired

redsx13

Why are you so adamant about defending the KA24? Let’s face it; it’s simply not a high performance motor. Why would people even waste their time with SR if they didn't offer some sort of a benefit? Ok, so there are some yuppies who throw SR's in their cars just to say they have one, but overall it is simply a better motor, with more options performance wise.

Let’s just say that both motors performed equally the same, the fact that the KA24de weighs more than the vq35de would normally kill the deal for me.

for those of you who are not familiar with engine model #'s the VQ35DE was used in the 350z, it is a V6 and pushed 300hp. Line that up with the Inline 4 @ 150hp KA24DE in the 240sx and maybe you will get my point.

Ka24de- 150hp- 388Lbs
Vq35de- 300hp- 330lbs

you know what really sucks though? for those of you that love your light little aluminum block SR's, well its not very light afterall. its only 3lbs lighter than the ka.

ha ha, you weren’t expecting that where you!

The_Doctor

Well now your comparing apples to oranges. The Vq35 is in a different league, both design wise and DISPLACEMENT wise.
Also, it comes in a $30K car and first hit the streets (of japan) in 2000 compared to the sr20det which came in a max $20K car and first hit the streets in 1989.

__________________
Sr's are like an asshole, everyones got one.
KA-T FTW

murda-c

Yeah but once you add all the piping and turbo accessories the difference will increase alot more.

__________________

sparticus102

If u want to increase your horsepower do everything that they have been telling u, but i do have to disagree about the popularity on the ka24de they are strong motors if u take care of them. I'm doing the exact same thing as u as in building the stock ka, but u should also put on 3in exhaust with down pipe and test pipe. If u do turbo charge it i recommend buying zex spark plugs they make a big difference, along with a msd blaster coil and a igniter chip believe me everything makes a difference!

Mangudai

You''ll be much happier with a T25 set up bro. You can build an efficient one relatively inexpensive too. I feel you though, I like you originally wanted to go NA but your goals aren't sensible with these engines.



?





Are you saying their heads are better design wise?

__________________
Almost there.

CharlesForester

If you want to get over 200 WHP N/A you'll need the following parts

- Injen Cold air intake
$200
- OBX 4-1 header
$150
- Exhaust + highflow cat
$400
- Brian Crower stage 2 cams
$350
- N60 MAF (from Maxima)
$40
- Fidanza lightweight flywheel
$300
- Decently built s14 head
$500
- A/F controller
$250
- ka24e pistons
$200
- Iridium sparkplugs + good wires
$60
- sr20 370cc fuel injectors
$300
- z32 fuel pump
$75
- Aluminum Drive Shaft
$ 300

That's $3,125 excluding labor and Port matching/Polishing.



With all those components, high octane fuel and a great tune - you should easily break 200whp. You might even be as high as 225 whp. The problem is, extracting the HP from the KA without FI is a pain in the ass. It requires a lot of money on parts. It requires a lot of time (or money) on finding the perfect tune. Then you need to basically run race gas so that your engine doesn't detonate with such high-compression and advanced timing. N/A KA is not a DD once you begin raising compression and extreme tuning...

Jus Skott

if you only want 2 and change to the wheels and have it NA. just drop an LT1 or LS1 in there and call it a day.

J90lude

Boost!!!

__________________
"Drive it like you running from the cops"