Enjuku Racing - *NEW* ER SPEC Nissan 350Z Drint Car Roll Cage - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Enjuku Racing · 12-02-2015, 02:47 PM

ER Spec Nissan 350z Drift Car Roll Cage
In Stock and Ready to Ship!
$795.00

Photo is for clarification purpose only. Actual part may vary.

Nissan 350z Roll Cage for Drift Car racing. 1.50" X 0.095 DOM Mild steel

Main Hoop and Roof Hoop Are Wider Than most cages and hug the chassis very nice.

Interior panels must be removed

Ment to be used with factory dash bar

Windshield runners fit in between the Dash and Door

Cage Includes Diagnol, 2-Piece Crossmember For Main Hoop, Cage Plates for floor mount and boxes, also Formula D Legal Intrustion Bars.

Add more strength to your ER Spec Cage, Choose type of dimple plates when ordering.

Dimple Plate Dimensions: 24" x 6" x 1/8

~~THESE CAGES ARE WELD-IN, NOT BOLT IN, AND DO NOT COME PRE NOTCHED~~

We recommend these be installed by a PROFESSIONAL fabricator experienced with installing roll cages. If you have any questions regarding bar placement or fitment please contact us prior to installing the cage completely.

12-02-2015, 02:47 PM	#1
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 37 Posts: 3,045 Trader Rating: (29) Feedback Score: 29 reviews	*Enjuku Racing - NEW* ER SPEC Nissan 350Z Drint Car Roll Cage ER Spec Nissan 350z Drift Car Roll Cage In Stock and Ready to Ship! $795.00 Photo is for clarification purpose only. Actual part may vary. Nissan 350z Roll Cage for Drift Car racing. 1.50" X 0.095 DOM Mild steel Main Hoop and Roof Hoop Are Wider Than most cages and hug the chassis very nice. Interior panels must be removed Ment to be used with factory dash bar Windshield runners fit in between the Dash and Door Cage Includes Diagnol, 2-Piece Crossmember For Main Hoop, Cage Plates for floor mount and boxes, also Formula D Legal Intrustion Bars. Add more strength to your ER Spec Cage, Choose type of dimple plates when ordering. Dimple Plate Dimensions: 24" x 6" x 1/8 ~~THESE CAGES ARE WELD-IN, NOT BOLT IN, AND DO NOT COME PRE NOTCHED~~** We recommend these be installed by a PROFESSIONAL fabricator experienced with installing roll cages. If you have any questions regarding bar placement or fitment please contact us prior to installing the cage completely. __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode