CA Brand New set of Drift Freaq KA/SR/CA Engine & trans mounts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

drift freaq · 02-09-2013, 11:46 AM

yup here they are 80 durometer track tested high quality poly urethane engine and trans mounts. There is a link in my sig that will take you to a multipage reveiw. Lots of people here are using my mounts.

They come with a one month warranty against possible defects in manufacturing. If you are using them in motorsports then like any other product sold for motorsports there is no warranty .

The studs do not run straight through the center of these mounts unlike other brands.
You will not get any excessive vibrations from these because of this.
You will get mounts that are better than Nismo and do not rattle your teeth.

The trans mount has exhaust hanger studs!! It also improves your shifting because your transmission no longer moves around under your shift lever like stock. Because of this you get a the effect of having a short shifter without really having one. The shift lever goes straight into its gates quickly and with less effort.

You need to use a heat shield or a heat wrap on the exhaust/turbo side of the engine.
I also should point out that the nuts that are provided are nyloc which means you do not need to torque them down hard. A hand wrench is fine for tightening them. Do not use an air ratchet or impact gun.

Here is a Brand New set of the Greens which are the latest design. $120 ea.( for trans or engine mounts only) or $230( engine and trans) for the set picked up. $136 ea. shipped or $249 shipped for the full set. my paypal is [email protected]

driftage240 · 02-09-2013, 04:26 PM

Hows fitment on these

drift freaq · 02-10-2013, 12:07 PM

Quote:

Originally Posted by driftage240

Hows fitment on these

Fitment is good David. We did have a couple of trans mounts, that we got the studs off center a bit. We are taking care of that, thanks to your feedback.

DJ-of-E · 02-10-2013, 01:07 PM

Quote:

Originally Posted by driftage240

Hows fitment on these

I only had the engine mount greens.

Honestly, take a bit of time to align them correctly between the chassis and engine and make sure both sides are alight flat. Afterwards, when you drive it, you'll realized drift freaq is a genius in his design as nismo replacements and other aftermarket brands rattle your teeth out like crazy (i sold my nismo afterwards).

Unfortunately, I bought them before he released the transmission mounts sometime last year. Planning on buying the tranny mounts as soon as my engine replacement project gets started next month

drift freaq · 02-11-2013, 12:22 PM

to the top for this.

drift freaq · 02-12-2013, 11:43 AM

last official bump

lennex06 · 02-14-2013, 10:20 AM

Do these fit on a ka?

smokescreen240 · 02-14-2013, 11:39 AM

Quote:

Originally Posted by lennex06

Do these fit on a ka?

yes, all ka, sr and ca mounts are universal.

02-09-2013, 11:46 AM	#1
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	Brand New set of Drift Freaq KA/SR/CA Engine & trans mounts yup here they are 80 durometer track tested high quality poly urethane engine and trans mounts. There is a link in my sig that will take you to a multipage reveiw. Lots of people here are using my mounts. They come with a one month warranty against possible defects in manufacturing. If you are using them in motorsports then like any other product sold for motorsports there is no warranty . The studs do not run straight through the center of these mounts unlike other brands. You will not get any excessive vibrations from these because of this. You will get mounts that are better than Nismo and do not rattle your teeth. The trans mount has exhaust hanger studs!! It also improves your shifting because your transmission no longer moves around under your shift lever like stock. Because of this you get a the effect of having a short shifter without really having one. The shift lever goes straight into its gates quickly and with less effort. You need to use a heat shield or a heat wrap on the exhaust/turbo side of the engine. I also should point out that the nuts that are provided are nyloc which means you do not need to torque them down hard. A hand wrench is fine for tightening them. Do not use an air ratchet or impact gun. Here is a Brand New set of the Greens which are the latest design. $120 ea.( for trans or engine mounts only) or $230( engine and trans) for the set picked up. $136 ea. shipped or $249 shipped for the full set. my paypal is [email protected] __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

02-09-2013, 04:26 PM	#2
driftage240 Post Whore! Join Date: Sep 2005 Location: TUJUNGA Age: 37 Posts: 2,869 Trader Rating: (23) Feedback Score: 23 reviews	Hows fitment on these __________________ Misty blu is coming 4 you!

02-11-2013, 12:22 PM	#5
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	to the top for this. __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

02-12-2013, 11:43 AM	#6
drift freaq R.I.P. Aya, always love Join Date: Nov 2001 Location: Los Feliz/Hollywood Posts: 18,558 Trader Rating: (215) Rides Gallery: drift freaq Feedback Score: 215 reviews	last official bump __________________ "Having a lot of tracks on a song is like putting stickers on a car to get more horsepower" New Video https://www.youtube.com/watch?v=uebV1OnbRsw Buy my mounts! http://zilvia.net/f/sale-items/51531...ns-mounts.html http://zilvia.net/f/tech-talk/317539...e-mouts-6.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-14-2013, 10:20 AM	#7
lennex06 Zilvia Member Join Date: Mar 2010 Location: north hollywood Posts: 238 Trader Rating: (2) Feedback Score: 2 reviews	Do these fit on a ka?