Exhaust Manifold stud broken...need help! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Five_5Zigen_4 · 07-27-2009, 07:37 PM

Hey guys...was going to start putting my motor back together so I could drop it in the car and try to get this thing running. When I put the exhaust manifold on, I noticed that the bottom right stud (as your facing the exhaust side) is broken off and recessed into the head about 1/8 to 1/4 of an inch. I tried using some easy-outs, but it just sat there spinning, hardly making a dent in the stud. Was curious if you guys had any suggestions on how to get this bad boy out.

Thanks in advance

Jason

P.S. this is on an SR.

Five_5Zigen_4 · 07-27-2009, 07:43 PM

I'm dumb lol...didn't think to search the forum...my bad!!

07-27-2009, 07:37 PM	#1
Five_5Zigen_4 Zilvia Member Join Date: Feb 2006 Location: Rapid City, SD Age: 40 Posts: 164 Trader Rating: (2) Feedback Score: 2 reviews	Exhaust Manifold stud broken...need help! Hey guys...was going to start putting my motor back together so I could drop it in the car and try to get this thing running. When I put the exhaust manifold on, I noticed that the bottom right stud (as your facing the exhaust side) is broken off and recessed into the head about 1/8 to 1/4 of an inch. I tried using some easy-outs, but it just sat there spinning, hardly making a dent in the stud. Was curious if you guys had any suggestions on how to get this bad boy out. Thanks in advance Jason P.S. this is on an SR. __________________ 73 240z Resto project 91 s13 hatch - SR swapped, blown up, parting out

07-27-2009, 07:43 PM	#2
Five_5Zigen_4 Zilvia Member Join Date: Feb 2006 Location: Rapid City, SD Age: 40 Posts: 164 Trader Rating: (2) Feedback Score: 2 reviews	I'm dumb lol...didn't think to search the forum...my bad!! __________________ 73 240z Resto project 91 s13 hatch - SR swapped, blown up, parting out

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode