collegekid

I posted this a while ago but I didn't really take anyone's low-ball offer.

I am posting it again because I want to make room. I literally have too much stuff in my basement and garage, this needs to move. Again, I wont bite for your little $250-300 offers, dont waste my time or yours.

S13 Ka, came from a crashed car. Its a full setup minus a/c condenser, hardlines, clutch fan, and radiator. Had 120,xxx miles verified by carfax










engine is on the engine stand

I do not have the fusebox.

I really have too much stuff to list. This is for someone who wants to yank out their non running ka or swap from kae to ka24de. You put in oil, replace some belts if you want, put in coolant, and crank that shit soldier boy.




I have everything from the front of the clutch fan mounting point bullshit all the way back to the differential, including pedals, shifter boot. I have a box full of bolts and shit from this car











READ THIS PART YO

I have a lot of 96 parts from an auto longblock I bought with 43,xxx miles on it (long gone) Most of these parts have 43k on them unless I specify
96 43k mile longblock - SOLD
S14 manual trans- SOLD
s13 full 5 speed swap- SOLD

STILL HAVE
s13 differential
Fuel pump
5 lug rotors that need epic cleaning batman
intake with injectors, broken egr pipe, most of the oem stuff on it
Auto trans
Random pulleys since I started to strip the longblock and said fuck it, bigger motor time
Manual Ecu
Complete engine harness from a 96
random 96 starter
MAF housing

I have a zenki (1996) front end from my car
It is the one that I crashed the car with and replaced with the s15 front end
Details of that are
-emerald green
-bumper has all lights in it, all work, the bumper is missing a huge chunk of the bottom middle part
-hood is still in decent shape aside from an indent towards the front
-fenders are okay with some scratches
-corner lights were undamaged, I think the passenger side could use a new blub
-headlights still worked except the plastic tabs on the housing broke off on either the drivers side or passenger side. The part that broke off is the mount that was in the middle of the headlights
-zenki grill is still good


Realistically, the fenders are still good, the hood will need the dent pulled out and that is good, grill is fine, headlights will mount up but you will need to glue the pieces back together, bumper is free pretty much to whoever buys the zenki shit.




Picture from 12-16-12 in the morning


Surface rust, it comes off with a wire brush ,didnt have time to get to it yet


Picture from 12-16-12 at night, I just finished getting the dents out on the one fender, gonna clean up the other one too when I get a chance








Some random pictures of stuff, I have a lot more, Just ask what you need










There is no warranty on anything. I'm a guy with some parts taking up some space. It doesn't bother me at all. It bothers my mom occasionally. When my mom is bothered, my turtles sense it. Do you want my turtles to be stressed out?

I want to sell the s13 ka in a whole piece. It is really not worth my time to sit here and take the head off, ship it to Kentucky and waste all that time just to take less of a hit. I'm losing money on this anyway.

S13 ka as one thing
5 speed swap as another
Little bits and pieces I dont mind as long as you dont ask me dumb shit like whether or not I will sell one rotor.
S14 Manual trans was just sold on 11-25


Like I said, the lowball offers can stay up your butt.

I dont mind shipping but dont be shocked when you hear that shipping the trans will cost like $175 on top of the trans price

The engine wont be shipped, bring a truck or a van or something

Trans probably wont


Best way to contact me is

1. Email [email protected]
2. Pm thru here

I will give you my cellphone number when we actually discuss things seriously. There is no point for me to post my number and get 47 text messages about the valve cover at 3 am because your in Cali.

sr91240

Emailed you

collegekid

Bump, car is being delivered this weekend. I want to move some old parts out to make room for new ones, I know somebody needs something.

Garcia's14koukils1

How much for s14 trans shipped to 60402

collegekid

Thats going to be around $300-$350 since shipping is $150+

Garcia's14koukils1

That's fine if u got most of the parts to make my 1996 240 manual
Let me know if u got an ecu pedals if u do im all in need to swap my 240

Garcia's14koukils1

Pm me ur number nd we can work a deal out

collegekid

Holy shit I didnt even see your response dude.^^^^

Please just pm me or email me if anyone needs anything.

Garcia's14koukils1

Well since my last message i sent u i got my trans nd ecu all i need is an s14 clutch pedal and a manual trans harness if u have one shoot me a txt at 708-495-7511 hopefully its soon cuz i need the parts.. so give me a price on the manual trans harness

Thursday7

Sup collegekid. You got a driveshaft?

Edit: I'm assuming the driveshaft is an S14. I may need some stuff from you though, buddy.

__________________
WTB SR20 *Non-Rep* Bottom Mount Manifold
WTB Bride Zieg II

Irresistible

Lemme know on price for the 1996 manual "CA" ECU, and '96 engine harness. Separately. Might want one and not the other.

__________________
GLEAM//★☆Street Dancer☆★
IG: streetdncr // tumblr: steve-strtdncr

collegekid

Garcia I jsut pm'd you

Sup Thursday, no I do not have an S14 driveshaft. I have a full s13 5 speed swap minus a trans crossmember, so
YES I have an s13 driveshaft.

Hey dude, I need to check my pricelist at home, but you can pm me with an offer. I will try and leave you a pm later today.

ashy-larry

How much for the s14 fuel pump shipped to 34448(FL) plz? THanks

__________________

gangly

how much for s13 5 speed swap (don't really need driveshaft) shipped to 52328?

EDIT: also would like a quote for the ka24de + 5 speed transmission shipped to 52328.... thanks.

Thursday7

there's a slight chance I have interest in the D Shaft and the ECU. I know you don't wanna part it out, but I will make you unlimited pixelcars for my 240forums buddy.

__________________
WTB SR20 *Non-Rep* Bottom Mount Manifold
WTB Bride Zieg II

collegekid

I will try and get a quote tomorrow from the post office,ups store and fedex if I can find one. Online, shipping is ridiculous for some reason.

I'll get you a quote tomorrow ish,shipping is going to be expensive just a heads up.

It's cool bro, I'll sell you the driveshaft and ECU if the guy above takes the 5 speed swap. Things are really starting to get crowded in my basement.
I hope you can come pick this up. You are only like an hour from me too. I drove 4 hours for a dashboard, get your ass down here LOL

Thursday7

I hope so collegekid. This S13 I'm looking at might just work out, but not trying to get my hopes up

__________________
WTB SR20 *Non-Rep* Bottom Mount Manifold
WTB Bride Zieg II

Thursday7

yo collegekid whereabouts in Philly are you?

__________________
WTB SR20 *Non-Rep* Bottom Mount Manifold
WTB Bride Zieg II

collegekid

I'm in northeast Philadelphia. If you want to use a reference point, you can use byberry road and bustleton avenue as a nearby intersection or 11708 bustleton avenue Philadelphia pa 19116 as an address. I live within 3 minutes of both

efaen s14

Does the ka run with no issues and good compression?

charizard240s14

Fenders please !!!!!!! Pmed you

collegekid

Never ran the motor. You are welcome to come over and do a compression test.
Oil came out clean, whatever coolant I had came out clean and gave me a headache, sparkplugs are still alright. I can pull the oil pan for you and show you whats in there, but I can't sit here and take apart the s13 stuff, literally no room to do that.

I replied to you but I can do 195 for the pair. The scratches are really the only issue, I can probably clean up the surface rust in the usual area that everyone has it.



Guys, for the zenki stuff, I'm trying to sell it almost as one package or everything as pairs. I can't sit here and sell one fender or 1 corner light, etc.

Shipping wise, from Philadelphia to cali, its like $300 for a pallet. (liftgate pickup, and non liftgate delivery to a business)

collegekid

Alright guys a few parts got sold in the past few weeks.
S13 5 speed swap is gone, the s14 5speed trans is gone, and a few other small misc parts.

The zenki front end I would like gone. I'd also like to sell the 96 ka intake with everything on it along with other random pullies. I already have the room I need but I'd like to make more room.