fender rolling/pulling question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Speedstyles408 · 01-17-2010, 09:53 AM

hey i'm a newb at this i got a s13 hatch and i'm tryin to fit 17x9 +0 wheels curious how much of a roll or pull i would need and how much negative camber i would also need thanks for any help

davirene · 01-17-2010, 10:20 AM

Your tires and your stance are what you should consider....Dont roll until you have the tires and the look you want. I have 18x9.5 with a stretched tire. I have about a 3 inch drop all around. I also have a 14mm spacer on the front with a custom made 31mm spacer on the back.

This pic was right before I put the spacers on the rear and before I lowered it.

Speedstyles408 · 01-17-2010, 12:40 PM

well i'm basically trying to tuck tire on the rears and the fronts i'm tryin to run a 215-45 if i wanna run a 215-40 . thats the stance i'm lookin for

HPballer76 · 01-17-2010, 12:45 PM

just put on your wheels and tires and roll/pull till you have the stance you want..

Maiku240sxS14 · 01-18-2010, 08:23 AM

To roll or pull your fenders is BECAUSE you are rubbing somewhere. If your not rubbing, no need to roll or pull your fenders.

So how about you put your wheel/tires on, drive around and check to see if your rubbing. Then roll/pull what is necessary.

01-17-2010, 09:53 AM	#1
Speedstyles408 Leaky Injector Join Date: Jul 2009 Location: San Jose Posts: 57 Trader Rating: (3) Feedback Score: 3 reviews	fender rolling/pulling question hey i'm a newb at this i got a s13 hatch and i'm tryin to fit 17x9 +0 wheels curious how much of a roll or pull i would need and how much negative camber i would also need thanks for any help

01-17-2010, 12:45 PM	#4
HPballer76 Zilvia Junkie Join Date: May 2008 Location: Greensboro N.C. Age: 29 Posts: 452 Trader Rating: (9) Feedback Score: 9 reviews	just put on your wheels and tires and roll/pull till you have the stance you want.. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-17-2010, 10:20 AM	#2
davirene Zilvia Addict Join Date: Sep 2006 Location: Yucaipa, ca Posts: 600 Trader Rating: (21) Feedback Score: 21 reviews	Your tires and your stance are what you should consider....Dont roll until you have the tires and the look you want. I have 18x9.5 with a stretched tire. I have about a 3 inch drop all around. I also have a 14mm spacer on the front with a custom made 31mm spacer on the back. This pic was right before I put the spacers on the rear and before I lowered it.

01-17-2010, 12:40 PM	#3
Speedstyles408 Leaky Injector Join Date: Jul 2009 Location: San Jose Posts: 57 Trader Rating: (3) Feedback Score: 3 reviews	well i'm basically trying to tuck tire on the rears and the fronts i'm tryin to run a 215-45 if i wanna run a 215-40 . thats the stance i'm lookin for

01-18-2010, 08:23 AM	#5
Maiku240sxS14 Nissanaholic! Join Date: Jul 2007 Location: LA Posts: 2,019 Trader Rating: (37) Feedback Score: 37 reviews	To roll or pull your fenders is BECAUSE you are rubbing somewhere. If your not rubbing, no need to roll or pull your fenders. So how about you put your wheel/tires on, drive around and check to see if your rubbing. Then roll/pull what is necessary.