Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 05-14-2019, 01:57 AM   #1
Nathsx
 
Join Date: May 2019
Location: Scotland
Age: 29
Posts: 1
Trader Rating: (0)
Nathsx is an unknown quantity at this point
Feedback Score: 0 reviews
s13 180sx Front Wheel bearing Replacement

Hello guys,

I have a 97 180sx s13 with 5 stud conversion, i need to replace one of the front wheel bearings but im unsure which one to order as i dont know if it has conversion hubs or replacement s14/a hubs from the previous owner in japan

I believe there is a difference in spindle size from s13/s14

Ive taken some measurements from the car last night

The hub nut is 32mm which should be a S14 hub assembly (M30 for s13)
17mm nut size to strut should be a S13 knuckle which is confusing me as if it had been converted to S14 Knuckles it should be 19mm nuts in the bottom of the strut.
Spindle at nut end itself measured 21mm should get larger where the hub sits but i haven't disassembled it yet



Nathsx is offline   Reply With Quote
Sponsored Links
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:21 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™