4 lug Z32 brakes need rotors? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ARMORY · 06-05-2009, 02:01 AM

yo! i bought this shell that i just got running and it came with Z32 calipers in the front but the whole car is 4 lug and i want to get new rotors for the front if any one knows what kinda rotors i can use in the front it would be greatly appreciated!!!

good lookin out guys.

DreamN · 06-05-2009, 02:18 AM

You get Z32 rotors and have them redrilled for 4 lug. That's it.

iLagX · 06-05-2009, 02:34 AM

Good luck in redrill it yourself very hard...

take it to a professional $10 dollar per rotor.

codunc · 06-05-2009, 03:53 AM

Quote:

Originally Posted by iLagX

Good luck in redrill it yourself very hard...

take it to a professional $10 dollar per rotor.

re-drilling a rotor is super easy. you don't know what you're talking about.

HYPNOTIK · 06-06-2009, 06:25 AM

Or you could use Sentra SER rotors. Already 4 lug.

projectRDM · 06-06-2009, 09:03 AM

Quote:

Originally Posted by iLagX

Good luck in redrill it yourself very hard...

take it to a professional $10 dollar per rotor.

Drill press, old rotor, and a 9/16" drill bit. It's not rocket science. Even some of the idiots on this forum could do it.

Bushido · 06-06-2009, 09:58 AM

why redrill when you can just buy rotors that are already 4 lug?

projectRDM · 06-07-2009, 03:35 PM

Quote:

Originally Posted by Bushido

why redrill when you can just buy rotors that are already 4 lug?

Costs less in most cases. You're talking to 240SX owners remember. Cheap = good.

j87w · 06-07-2009, 10:25 PM

What I did when I redrilled mine was got a 1/2" or 9/16" drill bit, a 1/2" grade 8 bolt with a good size shank. The shank fit very tight in the to hole that lines up in the 4 lug and 5 lug rotor. I butted the rotors up. Installed the bolt (you will probably have to get some washers to cover up some of the shank so the nut will torque) . Then I aligned the center bores (I believed they are the EXACT same size). I torqued down the bolt. Then using a drill press I drilled the other 3 holes (using the 4 lug rotor as my guide) into the 5 lug rotor. They came out perfect.

ARMORY · 06-07-2009, 11:44 PM

Quote:

Originally Posted by HYPNOTIK

Or you could use Sentra SER rotors. Already 4 lug.

are these the same diameter and thickness as the Z32's?

Geno750 · 06-07-2009, 11:50 PM

Quote:

Originally Posted by HYPNOTIK

Or you could use Sentra SER rotors. Already 4 lug.

I thought that worked when you were using 26mm Z32 calipers, and isn't so great when using 30mm units.

projectRDM · 06-08-2009, 08:15 AM

Quote:

Originally Posted by ARMORY

are these the same diameter and thickness as the Z32's?

IIRC, the SE-R rotors are only 22mm thick.

06-05-2009, 02:01 AM	#1
ARMORY Leaky Injector Join Date: Nov 2008 Location: (909) Posts: 113 Trader Rating: (3) Feedback Score: 3 reviews	4 lug Z32 brakes need rotors? yo! i bought this shell that i just got running and it came with Z32 calipers in the front but the whole car is 4 lug and i want to get new rotors for the front if any one knows what kinda rotors i can use in the front it would be greatly appreciated!!! good lookin out guys.

06-05-2009, 02:18 AM	#2
DreamN Post Whore! Join Date: Nov 2006 Location: SoCal - 818 Age: 36 Posts: 10,691 Trader Rating: (54) Rides Gallery: DreamN Feedback Score: 54 reviews	You get Z32 rotors and have them redrilled for 4 lug. That's it. __________________ - Jimmy Wanted: TBD For Sale: TBD

06-06-2009, 06:25 AM	#5
HYPNOTIK Zilvia Addict Join Date: Apr 2008 Location: Pisa, Italy Posts: 700 Trader Rating: (3) Feedback Score: 3 reviews	Or you could use Sentra SER rotors. Already 4 lug. __________________

06-06-2009, 09:58 AM	#7
Bushido Post Whore! Join Date: Jun 2003 Location: SFL Posts: 3,562 Trader Rating: (10) Feedback Score: 10 reviews	why redrill when you can just buy rotors that are already 4 lug? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-05-2009, 02:34 AM	#3
iLagX Post Whore! Join Date: Dec 2008 Location: 626/714 Posts: 2,940 Trader Rating: (40) Feedback Score: 40 reviews	Good luck in redrill it yourself very hard... take it to a professional $10 dollar per rotor.

06-07-2009, 10:25 PM	#9
j87w Leaky Injector Join Date: Feb 2006 Location: nm Posts: 122 Trader Rating: (2) Feedback Score: 2 reviews	What I did when I redrilled mine was got a 1/2" or 9/16" drill bit, a 1/2" grade 8 bolt with a good size shank. The shank fit very tight in the to hole that lines up in the 4 lug and 5 lug rotor. I butted the rotors up. Installed the bolt (you will probably have to get some washers to cover up some of the shank so the nut will torque) . Then I aligned the center bores (I believed they are the EXACT same size). I torqued down the bolt. Then using a drill press I drilled the other 3 holes (using the 4 lug rotor as my guide) into the 5 lug rotor. They came out perfect.