redline racer510

I am in the process o f installing LS truck coils in place of the factory coils and want to bypass the igniror. Is there a connector that I can connect to my factory coilpack harness that connects to my engine harness. I don't want to cut into my engine harness because I want to be able to go back to stock if need be. I found this pick of a connector that looks like it will connect to the factory ignitor plug but can't find info on it.

__________________
WARNING: User has a low tolerance for stupidity. Post at your own risk.

redline racer510

So is there a connector that I can purchase that can bypass the ignitor or do I have to open it up and just solder the terminals directly across?

__________________
WARNING: User has a low tolerance for stupidity. Post at your own risk.

TheRealSy90

I've also been looking to make a plug and play ignitor delete for sr20 harnesses, I don't want to cut the plugs off my wiring specialties harness. Maybe get a bad ignitor and gut it and wire the terminals across inside the ignitor?

__________________

redline racer510

That's what I was thinking maybe find someone to 3d print something that bypasses the ignitor portion. Who would be interested in something like that?

__________________
WARNING: User has a low tolerance for stupidity. Post at your own risk.