Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 12-28-2012, 02:03 AM   #1
flipmike22
Zilvia Addict
 
Join Date: May 2011
Location: las vegas
Posts: 691
Trader Rating: (3)
flipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choices
Feedback Score: 3 reviews
Nissan s14 ka24de no power, sputter, bog HELP!!!

Ok so I have a 1995 s14 auto.

Story
Me and my girl went out car drove fine and returned to my car 2 hours later started right up drove 2 blocks and bam.
Cars acts like dying
Sputters
Bogs
Gas pedal to the ground but takes 5-10 seconds till it actually accelerates
Died at a light twice
I checked the battery was fine
Pulled the negative on the battery stayed on
Pulled the injectors they're fine
Fuel pump purges and works
Car can idle all day at my house but can't run properly


Anyone help me out with this it's an emergency it's my dd and my project isn't up and running.
flipmike22 is offline   Reply With Quote
Sponsored Links
Old 12-28-2012, 05:31 PM   #2
flipmike22
Zilvia Addict
 
Join Date: May 2011
Location: las vegas
Posts: 691
Trader Rating: (3)
flipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choices
Feedback Score: 3 reviews
Anyone got anything here?
flipmike22 is offline   Reply With Quote
Old 12-28-2012, 05:36 PM   #3
Alamo_City_210
Zilvia Member
 
Alamo_City_210's Avatar
 
Join Date: Aug 2012
Location: san antonio tx
Posts: 190
Trader Rating: (2)
Alamo_City_210 is an unknown quantity at this point
Feedback Score: 2 reviews
Have you checks plugs/wires?
Alamo_City_210 is offline   Reply With Quote
Old 12-28-2012, 05:39 PM   #4
flipmike22
Zilvia Addict
 
Join Date: May 2011
Location: las vegas
Posts: 691
Trader Rating: (3)
flipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choices
Feedback Score: 3 reviews
Quote:
Originally Posted by Alamo_City_210 View Post
Have you checks plugs/wires?
Changed my wires 3 days ago.

Sparks plugs 2 months ago so it can't be those.
flipmike22 is offline   Reply With Quote
Old 12-29-2012, 11:42 AM   #5
420xsGuy
Leaky Injector
 
420xsGuy's Avatar
 
Join Date: May 2012
Location: Santa FE springs
Age: 31
Posts: 103
Trader Rating: (0)
420xsGuy is an unknown quantity at this point
Feedback Score: 0 reviews
check the gap on the plugs sometimes people overlook that but im curious to find out what it is
420xsGuy is offline   Reply With Quote
Old 12-29-2012, 01:19 PM   #6
flipmike22
Zilvia Addict
 
Join Date: May 2011
Location: las vegas
Posts: 691
Trader Rating: (3)
flipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choices
Feedback Score: 3 reviews
Quote:
Originally Posted by 420xsGuy View Post
check the gap on the plugs sometimes people overlook that but im curious to find out what it is
I don't think it's the gapping because I changed the sparks 2 months ago with no issues.
flipmike22 is offline   Reply With Quote
Old 12-30-2012, 10:43 PM   #7
M374llic4
Leaky Injector
 
Join Date: Apr 2006
Location: Tampa
Posts: 87
Trader Rating: (0)
M374llic4 is an unknown quantity at this point
Feedback Score: 0 reviews
Send a message via AIM to M374llic4
Pop the ECU out of the passenger side kick panel under the dash area and you can look up some instructions how to check the ECU codes yourself, and it should tell you what is up.
__________________
M374llic4 is offline   Reply With Quote
Old 01-01-2013, 02:53 AM   #8
flipmike22
Zilvia Addict
 
Join Date: May 2011
Location: las vegas
Posts: 691
Trader Rating: (3)
flipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choices
Feedback Score: 3 reviews
So I got codes 33, 34 and 14. I unplugged the knock and the o2. No progress.....anyone help?
flipmike22 is offline   Reply With Quote
Old 01-02-2013, 04:38 PM   #9
flipmike22
Zilvia Addict
 
Join Date: May 2011
Location: las vegas
Posts: 691
Trader Rating: (3)
flipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choices
Feedback Score: 3 reviews
Bump anyone help me here?
flipmike22 is offline   Reply With Quote
Old 01-02-2013, 08:12 PM   #10
mantas
Zilvia Addict
 
mantas's Avatar
 
Join Date: Feb 2011
Location: LALALAND
Posts: 822
Trader Rating: (7)
mantas is an unknown quantity at this point
Feedback Score: 7 reviews
Vacumme leak. Check the egr hoses in the back probably a ripped hose.
mantas is offline   Reply With Quote
Old 01-02-2013, 09:01 PM   #11
flipmike22
Zilvia Addict
 
Join Date: May 2011
Location: las vegas
Posts: 691
Trader Rating: (3)
flipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choicesflipmike22 has made poor choices
Feedback Score: 3 reviews
Quote:
Originally Posted by mantas View Post
Vacumme leak. Check the egr hoses in the back probably a ripped hose.
I looked for vacuum leaks breifly I didn't hear or see any but ill look again. Also ill check the egr. Any other suggestions?
flipmike22 is offline   Reply With Quote
Old 01-02-2013, 10:05 PM   #12
mantas
Zilvia Addict
 
mantas's Avatar
 
Join Date: Feb 2011
Location: LALALAND
Posts: 822
Trader Rating: (7)
mantas is an unknown quantity at this point
Feedback Score: 7 reviews
What about compression test? If you can give it a shot always remember to have throttle plate held open and dont dump fuel so disconnect the pump or pull the fuse. To find a vacuum leak use some brake cleaner or carb cleaner and spray a little on suspect hoses or seals but have a fire extinguisher handy lol. Some people say soapy water works but i have never used it. Supposed to bubble when sprayed. What do the codes mean did you look into it? Bad o2 would just make it run super rich since the ecu would dump more fuel and may cause bogging but usually car still runs pretty good. I had mine unplugged for a long time didnt notice it until someone said i was running really rich.
mantas is offline   Reply With Quote
Old 01-02-2013, 10:08 PM   #13
mantas
Zilvia Addict
 
mantas's Avatar
 
Join Date: Feb 2011
Location: LALALAND
Posts: 822
Trader Rating: (7)
mantas is an unknown quantity at this point
Feedback Score: 7 reviews
Just looked up the codes all lead to bad maf. I got a spare ka24de if you need one. Unplug maf and see if idle improves or if car dies. Also could be bad TPS mine would cut out at WOT because of a bad TPS. Should read 2.5 or 3.5 volts fully open and .05 closed if i recall correctly.
mantas is offline   Reply With Quote
Old 01-03-2013, 01:59 PM   #14
mantas
Zilvia Addict
 
mantas's Avatar
 
Join Date: Feb 2011
Location: LALALAND
Posts: 822
Trader Rating: (7)
mantas is an unknown quantity at this point
Feedback Score: 7 reviews
So did you figure itput?
mantas is offline   Reply With Quote
Old 01-05-2013, 10:18 AM   #15
mantas
Zilvia Addict
 
mantas's Avatar
 
Join Date: Feb 2011
Location: LALALAND
Posts: 822
Trader Rating: (7)
mantas is an unknown quantity at this point
Feedback Score: 7 reviews
So what happened did you fix the car?
mantas is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:21 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™