S13 Chassis Wiring Master List - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*burnsauto* · 11-18-2009, 09:37 PM

Alright guys, you better appreciate this. Hopefully you guys can use this as a good point of reference when you decide to tackle whatever wiring job you may happen to be working on.

I've had an OEM Wiring Diagram from 1988 for the S13 chassis, SOHC, and covers both hatch a coupe models. I'll Work on getting better pictures, but my scanner just isn't big enough for the pages (I'll take it to a copy place to have them scanned, and scaled down) Included in the book is a 7ft, color coded, schematic of the entire harness which I'll also figure out a way to get on here... possibly in a PDF or Zip. Anyways, hope you guys like it, I've never seen another one of these books.

Main Body Harness
M1 – Time control unit
M2 – Headlamp timer
M3 – Check connector
M4 – Warning chime
M5 – Fuse block
M6 – Accessory relay-1
M7 – Circuit breaker
M8 – Circuit breaker
M9 – Ignition relay
M10 – Ignition relay
M11 – To engine room harness (E101)
M12 – To engine room harness (E102)
M13 – To engine room harness (E103)
M14 – Bulb check relay
M15 – Rear window defogger relay
M17 – A.S.C.D. clutch switch
M18 – To door harness L.H. (D1)
M19 – To door harness L.H. (D2)
M20 – Driver side front limit switch
M21 – Kickdown switch
M22 – A.S.C.D. cancel switch
M23 – Stop lamp switch
M24 – A.S.C.D. main switch
M25 – Headlamp retractor switch
M26 – Illumination control switch
M27 – Front fog lamp switch
M28 – Shift lock control unit
M29 – Combination flasher unit
M30 – Mode door motor
M31 – Foot lamp L.H.
M32 – O.D. off indicator lamp
M33 – Rear wiper and washer switch
M34 – Rear window defogger switch
M35 – Hazard switch
M36 – Radio
M37 – Radio
M38 – Cassette deck
M39 – Cassette deck
M40 – Push control unit
M41 – Fan switch
M42 – Diode
M43 – To sub-harness (M44)
M44 – To main harness (M43)
M45 – Glove box lamp
M46 – Glove box lamp switch
M47 – To instrument harness (I1)
M48 – To instrument harness (I2)
M49 – Thermo control amplifier
M50 – Heater resistor
M51 – Blower motor
M52 – Foot lamp R.H.
M53 – To E.F.I. harness (F1)
M54 – To door harness R.H. (D101)
M55 – To door harness R.H. (D102)
M56 – To room lamp harness (R1)
M57 – Body ground
M58 – Intake door motor
M59 – To sub-harness (M60)
M60 – To main harness (M59)
M61 – Door lock timer
M62 – Washer warning lamp
M101 – Body ground
M102 – Lap belt buckle switch
M103 – Seat belt switch
M104 – Ash tray illumination
M105 – Cigarette lighter
M106 – Door mirror control switch
M107 – Automatic seat belt control unit
M108 – Parking brake switch
M109 – A/T device
M110 – Shift lock solenoid
M111 – Door switch L.H.
M112 – Automatic seat belt motor assembly L.H.
M113 – Body ground
M116 – Body ground
M117 – Rear speaker L.H.
M118 – Rear side marker lamp L.H.
M119 – Rear combination lamp L.H.
M120 – Rear combination lamp L.H.
M121 – Back-up lamp L.H.
M122 – Rear wiper amplifier
M123 – License lamp L.H.
M124 – License lamp R.H.
M125 – Body ground
M126 – Luggage room lamp switch
M127 – Back-up lamp R.H.
M128 – Luggage room lamp
M129 – Rear combination lamp R.H.
M130 – Rear combination lamp R.H.
M131 – Rear side marker lamp R.H.
M132 – Fuel tank gauge unit
M134 – Rear speaker R.H.
M135 – To back door harness (D501)
M136 – To back door harness (D502)
M137 – To back door harness (D503)
M138 – Automatic seat belt motor assembly R.H.
M139 – Door switch R.H.
M140 – Trunk room lamp switch
M141 – Trunk room lamp
M142 – High-mounted stop lamp
M143 – Rear window defogger
M144 – Rear combination lamp L.H.
M145 – Rear combination lamp R.H.
M146 – A.B.S. control unit
M147 – Body Ground
M148 – Rear sensor

Engine Bay Harness
E1 – Windshield wiper motor
E3 – A.S.C.D. actuator
E5 – Rear washer motor
E6 – Front washer motor
E7 – Washer fluid level switch
E9 – To E.F.I. harness (F8)
E10 – To E.F.I. harness (F9)
E11 – To engine room harness no.2(E201)
E12 – Inhibitor switch
E13 – Revolution sensor
E14 – Inhibitor switch
E15 – To solenoid valve sub-harness
E16 – Relay box
E17 – To engine room harness no. 2 (E202)
E18 – To engine room harness no. 2 (E203)
E19 – To engine room harness no. 2 (E204)
E20 – Body ground
E21 – Low-pressure switch
E22 – Battery
E23 – Battery
E24 – Body ground
E25 – Clutch interlock relay
E27 – Front side marker lamp R.H.
E28 – To front fog lamp sub-harness (E51)
E29 – Headlamp R.H.
E30 – Headlamp motor R.H.
E31 – Front combination lamp R.H.
E33 – Horn-high
E34 – Condenser fan motor
E35 – Horn-low
E36 – Headlamp motor L.H.
E37 – Headlamp L.H.
E39 – Front combination lamp L.H.
E40 – Front side marker lamp L.H.
E41 – Body ground
E42 – Relay box
E43 – Dropping resistor
E44 – Compressor
E46 – A.I.V. control solenoid valve
E47 – Brake fluid level switch
E50 – Windshield wiper amplifier
E51 – To engine room harness (E28)
E52 – Front fog lamp R.H.
E53 – Front fog lamp L.H.
E54 – Front wheel sensor L.H.
E55 – Body ground
E56 – Actuator
E57 – Wiper amp.
E58 – A.S.C.D. actuator
E101 – To main harness (M11)
E102 – To main harness (M12)
E103 – To main harness (M13)
E105 – Clutch switch
E106 – Key lock solenoid
E107 – Key Switch
E108 – Ignition switch
E109 – Combination switch
E110 – Combination switch
E111 – Horn switch
E112 – Steering switch
E113 – Windshield wiper and washer switch
E114 – To E.F.I. harness (F3)
E115 – To E.F.I. harness (F4)
E116 – To E.F.I. harness (F5)
E117 – A/T control unit
E118 – A.S.C.D. control unit

Engine (E.F.I.) Harness
F1 – To main harness (M53)
F2 – E.C.C.S. control unit
F3 – To engine room harness (E114)
F4 – To engine room harness (E115)
F5 – To engine room harness (E116)
F8 – To engine room harness (E9)
F9 – To engine room harness (E10)
F10 – F.I.C.D. solenoid valve
F11 – A.A.C. valve
F12 – Injector no. 4
F13 – Air regulator
F14 – Injector no. 3
F15 – Pressure regulator control solenoid valve
F16 – S.C.V. control solenoid valve
F17 – Exhaust gas sensor
F18 – Injector no. 2
F19 – Injector no. 1
F20 – Engine ground
F21 – Crank angle sensor
F22 – Engine temperature sensor
F23 – Thermal transmitter
F24 – Throttle valve switch
F25 – Throttle sensor
F26 – E.G.R. control solenoid valve
F27 – Air flow meter
F28 – Tacho resistor
F29 – Condenser
F30 – Ignition coil
F31 – Power transistor
F32 – Front wheel sensor R.H.

Lower Engine Harness (A/T)
E201 – To engine room harness (E11)
E202 – To engine room harness (E17)
E203 – To engine room harness (E18)
E204 – To engine room harness (E19)
E205 – Battery
E206 – Power steering oil pressure switch
E207 Alternator
E208 – Oil pressure switch
E209 – Starter motor
E210 – Exhaust gas temperature sensor
E211 – Vehicle speed sensor
E212 – Back-up lamp switch
E213 – Neutral switch
E214 – 5th position switch

Instrument Panel Harness
11 – To main harness (M47)
12 – To main harness (M48)
13 – Head-up display control unit
14 – Combination meter
15 – Combination meter
16 – Combination meter
17 – Combination meter
18 – Combination meter

Door Harness
L.H.
D1 – To main harness (M18)
D2 – To main harness (M19)
D3 – Door speaker
D4 – Door speaker
D5 – Door Mirror Motor
D6 – Power window regulator
D7 – Power window main switch
D8 – Power window amplifier
D9 – Door lock actuator
D10 – Door lock switch
D11 – Door latch switch

R.H.
D101 – To main harness (M54)
D102 – To main harness (M55)
D103 – Door speaker
D104 – Door speaker
D105 – Door mirror motor
D106 – Power window regulator
D107 – Power window sub switch
D108 – Door lock actuator
D109 – Door lock switch
D110 – Door latch switch

Rear Hatch Harness
D501 – To main harness (M135)
D502 – To main harness (M136)
D503 – To main harness (M137)
D504 – Rear window defogger
D505 – High-mounted stop lamp
D506 – To rear wiper sub-harness (D551)
D507 – To rear wiper sub-harness (D552)
D551 – To back door harness (D506)
D552 – To back door harness (D507)
D553 – Rear window wiper motor

Roof Harness (lamp and sunroof)
R1 – To main harness (M56)
R2 – To sun roof harness (S1)
R3 – Spot lamp
R4 – Interior lamp
R5 – Interior lamp
R6 – Interior lamp
R8 – Automatic seat belt front limit switch

S1 – To room lamp harness (R2)
S2 – Body ground
S3 – Sun roof switch
S4 – Slide relay – open
S5 – Sun roof motor
S6 – Safety relay
S7 – Slide relay – close
S8 – Safety limit switch

EDIT: Notice the last picture....Engrish at it's best, "Room Ramp".

ballinnmiami240sx · 11-18-2009, 09:45 PM

good work. I have something similar

GSXRJJordan · 11-20-2009, 12:12 AM

Haha, that's cool, now you don't have to flip pages back and forth.

What we really need (and I plan on putting together in the supposedly-upcoming wiring section) is pinouts/wire colors to all these plugs, or at least the important ones.

*burnsauto* · 11-22-2009, 11:11 AM

Quote:

Originally Posted by GSXRJJordan

Haha, that's cool, now you don't have to flip pages back and forth.

What we really need (and I plan on putting together in the supposedly-upcoming wiring section) is pinouts/wire colors to all these plugs, or at least the important ones.

the book actually has that. this is just the first bit of information im posting. I know this stuff is in chiltons too, but IMO those books are garbage. Plus, this is a little easier than pulling up the fsm and looking through it for quick references. You guys know how many times we see the "where does this plug go" threads. Now we have a source to link them to instead of just telling them to go look it up themselves (which in all honesty, most prob. don't do.)

*DALAZ_68* · 04-30-2010, 02:50 PM

Quote:

Originally Posted by GSXRJJordan

Haha, that's cool, now you don't have to flip pages back and forth.

What we really need (and I plan on putting together in the supposedly-upcoming wiring section) is pinouts/wire colors to all these plugs, or at least the important ones.

this man for president...

*Wake* · 11-20-2009, 12:17 AM

yes Jordan that is a damn good idea, but all the info the op posted is readily avail in chiltons and FSM's.

but if you need any help with that Jordan let me know because I have 2 S13's worth of wiring harnesses, and I mean complete uncut harnesses so if you need to know the wire colors coming or going from anything Im sure I can help.

Seriously let me know.

Saint1899 · 11-20-2011, 08:44 PM

Quote:

Originally Posted by WakeBHR

yes Jordan that is a damn good idea, but all the info the op posted is readily avail in chiltons and FSM's.

but if you need any help with that Jordan let me know because I have 2 S13's worth of wiring harnesses, and I mean complete uncut harnesses so if you need to know the wire colors coming or going from anything Im sure I can help.

Seriously let me know.

Hi how are you sorry to bother you but i'm trying to figure out why my instrument cluster does not work. I have a 89 240sx that i just swapped out the SOHC with the DOHC i was wondering if you had the Pinout for the Body Harness that hooks from the computer to the Dash.

g6civcx · 11-22-2009, 11:12 AM

I would love something like this for S13 SR since the FSM is not available in English.

racepar1 · 11-22-2009, 11:40 AM

Good info I guess, but I just don't see the usefulness of the info you posted. Maybe it's just because I have access to wiring diagrams and could likely route an s-13 wiring harness with my eyes shut. I've kinda worked on a LOT of s-13's, including stripping them down to bare chasis and starting over. Once again good thought, I'm just not sure how much it will really help.

g6civcx · 11-22-2009, 11:47 AM

Pruned to stay on-topic.

racepar1 · 11-22-2009, 11:49 AM

Quote:

Originally Posted by g6civcx

It helps when you do an auto S13. The FSM doesn't do a good job of outlining what all the harnesses are.

I've never had a problem with mitchell???

g6civcx · 11-22-2009, 11:59 AM

Pruned to stay on-topic.

racepar1 · 11-22-2009, 12:11 PM

Quote:

Originally Posted by g6civcx

First, the thread wasn't meant to help someone who knows how to wire S13s in their sleep.

Second, the SOHC FSM is not available in PDF from what I've searched. I was forced to buy a hardcopy. I compared it with the DOHC FSM and there are slight differences.

Third, I prefer factory, but if given a choice, I would have to go with AllData because of our past history.

I've tried MOD on a few occasions but I wasn't familiar with the interface so it took more time.

I'm not as familiar with rewiring as you are so this thread would help me.

WOW, relax... I'm just saying....

godrifttoday · 11-23-2009, 09:41 PM

i got the sohc and dohc in pdf

xplicit240 · 11-22-2009, 12:33 PM

thanks burns. this is useful to those who DOES NOT know (ie. myself) i will be tackling a wiring tuck so im sure this will be handy and now its bookmarked.

EDIT: now im just waiting for the colors =)

*burnsauto* · 11-23-2009, 01:13 PM

yeah i mean this info wasn't presented to teach the guys who've owned a dozen s chassis. I still like to think that zilvia is a place to get good info and can actually be used as a good resource.

I just like putting what I have out there, and positively contributing to this site. If we all did the same (put out all the unbiased info we had) we would have fewer threads clogging stuff up with questions you can get from said info.

g6civcx · 11-23-2009, 03:52 PM

Honestly, your stuff won't really help me either because I prefer to use my hardcopy of the SOHC FSM, but it will help me help others by having something to point to.

*burnsauto* · 11-23-2009, 08:27 PM

i figured i can't hurt. Better than posting my "build" thread...

g6civcx · 11-23-2009, 09:03 PM

I personally have nothing against "build" threads. They give me ideas on what the parts look like.

*burnsauto* · 11-23-2009, 10:10 PM

Quote:

Originally Posted by g6civcx

I personally have nothing against "build" threads. They give me ideas on what the parts look like.

True they can help sometimes with arrangements. But, recently a lot of "build" threads have consisted of mainly "look at the parts i bought, heres a picture of a car torn apart, crap I'm out of money, done."

Anyways, to stay relevant, I'll start working on getting the color coated diagram loaded up. (I just have to bring the book over to staples and have them scan the 17" tall pages for me) It also gives some other information I'll get uploaded, and I'll add it to this thread.

240sxvaj · 11-23-2009, 09:17 PM

SWEET! Now my life is a LITTLE easier lol!

jzepol1985 · 11-23-2009, 11:56 PM

Thanks for the info

s14gmo · 01-27-2010, 11:05 PM

anyone know where i can get a full wiring diagram of a s14 k's interior harness.

EchaKqulo · 01-28-2010, 09:25 AM

Quote:

Originally Posted by s14gmo

anyone know where i can get a full wiring diagram of a s14 k's interior harness.

FSM maybe.......

Nahh!!

s14gmo · 01-28-2010, 06:17 PM

Quote:

Originally Posted by EchaKqulo

FSM maybe.......

Nahh!!

haha nice answer smart*ss I have a fsm for a jdm s14 not a ks aero thats what im looking for Dick!

EchaKqulo · 01-29-2010, 10:12 AM

Quote:

Originally Posted by s14gmo

haha nice answer smart*ss I have a fsm for a jdm s14 not a ks aero thats what im looking for Dick!

And what makes you think there is going to be a different FSM for a S14 K's, Q's, A's?

If you pay attention when reading into it, the harness schematic or some were else, is going to tell you what model would include the variation, if there is a variation, Dick!!.

s14gmo · 01-31-2010, 01:19 AM

Quote:

Originally Posted by EchaKqulo

And what makes you think there is going to be a different FSM for a S14 K's, Q's, A's?

If you pay attention when reading into it, the harness schematic or some were else, is going to tell you what model would include the variation, if there is a variation, Dick!!.

idk maybe different options different years just a thought but sorry Mr.Know it all haha yea right come on a 30yr old man that couldn't fix his brake lights and had to make a thread about it gtfo im done with this thread.

BoxMan · 04-24-2010, 11:55 AM

How would I access grounds m101 and m125?
I can't see where they are in the picture...

punxva · 04-24-2010, 12:47 PM

Quote:

Originally Posted by BoxMan

How would I access grounds m101 and m125?
I can't see where they are in the picture...

101 is under the drivers seat, and 125 is where the rear latch for the trunk is, the panel covers it if you still have it there. and the seat one is under the carpet on the hump

yellowxhoodie · 04-25-2010, 05:09 PM

This will def. help me figure out what i need to put back in and where i need to put it after i finish painting my interior. Thanks

11-18-2009, 09:37 PM	#1
burnsauto Premium Member Join Date: Dec 2006 Location: 717, PA Age: 35 Posts: 3,153 Trader Rating: (5) Rides Gallery: burnsauto Feedback Score: 5 reviews	S13 Chassis Wiring Master List Alright guys, you better appreciate this. Hopefully you guys can use this as a good point of reference when you decide to tackle whatever wiring job you may happen to be working on. I've had an OEM Wiring Diagram from 1988 for the S13 chassis, SOHC, and covers both hatch a coupe models. I'll Work on getting better pictures, but my scanner just isn't big enough for the pages (I'll take it to a copy place to have them scanned, and scaled down) Included in the book is a 7ft, color coded, schematic of the entire harness which I'll also figure out a way to get on here... possibly in a PDF or Zip. Anyways, hope you guys like it, I've never seen another one of these books. Main Body Harness M1 – Time control unit M2 – Headlamp timer M3 – Check connector M4 – Warning chime M5 – Fuse block M6 – Accessory relay-1 M7 – Circuit breaker M8 – Circuit breaker M9 – Ignition relay M10 – Ignition relay M11 – To engine room harness (E101) M12 – To engine room harness (E102) M13 – To engine room harness (E103) M14 – Bulb check relay M15 – Rear window defogger relay M17 – A.S.C.D. clutch switch M18 – To door harness L.H. (D1) M19 – To door harness L.H. (D2) M20 – Driver side front limit switch M21 – Kickdown switch M22 – A.S.C.D. cancel switch M23 – Stop lamp switch M24 – A.S.C.D. main switch M25 – Headlamp retractor switch M26 – Illumination control switch M27 – Front fog lamp switch M28 – Shift lock control unit M29 – Combination flasher unit M30 – Mode door motor M31 – Foot lamp L.H. M32 – O.D. off indicator lamp M33 – Rear wiper and washer switch M34 – Rear window defogger switch M35 – Hazard switch M36 – Radio M37 – Radio M38 – Cassette deck M39 – Cassette deck M40 – Push control unit M41 – Fan switch M42 – Diode M43 – To sub-harness (M44) M44 – To main harness (M43) M45 – Glove box lamp M46 – Glove box lamp switch M47 – To instrument harness (I1) M48 – To instrument harness (I2) M49 – Thermo control amplifier M50 – Heater resistor M51 – Blower motor M52 – Foot lamp R.H. M53 – To E.F.I. harness (F1) M54 – To door harness R.H. (D101) M55 – To door harness R.H. (D102) M56 – To room lamp harness (R1) M57 – Body ground M58 – Intake door motor M59 – To sub-harness (M60) M60 – To main harness (M59) M61 – Door lock timer M62 – Washer warning lamp M101 – Body ground M102 – Lap belt buckle switch M103 – Seat belt switch M104 – Ash tray illumination M105 – Cigarette lighter M106 – Door mirror control switch M107 – Automatic seat belt control unit M108 – Parking brake switch M109 – A/T device M110 – Shift lock solenoid M111 – Door switch L.H. M112 – Automatic seat belt motor assembly L.H. M113 – Body ground M116 – Body ground M117 – Rear speaker L.H. M118 – Rear side marker lamp L.H. M119 – Rear combination lamp L.H. M120 – Rear combination lamp L.H. M121 – Back-up lamp L.H. M122 – Rear wiper amplifier M123 – License lamp L.H. M124 – License lamp R.H. M125 – Body ground M126 – Luggage room lamp switch M127 – Back-up lamp R.H. M128 – Luggage room lamp M129 – Rear combination lamp R.H. M130 – Rear combination lamp R.H. M131 – Rear side marker lamp R.H. M132 – Fuel tank gauge unit M134 – Rear speaker R.H. M135 – To back door harness (D501) M136 – To back door harness (D502) M137 – To back door harness (D503) M138 – Automatic seat belt motor assembly R.H. M139 – Door switch R.H. M140 – Trunk room lamp switch M141 – Trunk room lamp M142 – High-mounted stop lamp M143 – Rear window defogger M144 – Rear combination lamp L.H. M145 – Rear combination lamp R.H. M146 – A.B.S. control unit M147 – Body Ground M148 – Rear sensor Engine Bay Harness E1 – Windshield wiper motor E3 – A.S.C.D. actuator E5 – Rear washer motor E6 – Front washer motor E7 – Washer fluid level switch E9 – To E.F.I. harness (F8) E10 – To E.F.I. harness (F9) E11 – To engine room harness no.2(E201) E12 – Inhibitor switch E13 – Revolution sensor E14 – Inhibitor switch E15 – To solenoid valve sub-harness E16 – Relay box E17 – To engine room harness no. 2 (E202) E18 – To engine room harness no. 2 (E203) E19 – To engine room harness no. 2 (E204) E20 – Body ground E21 – Low-pressure switch E22 – Battery E23 – Battery E24 – Body ground E25 – Clutch interlock relay E27 – Front side marker lamp R.H. E28 – To front fog lamp sub-harness (E51) E29 – Headlamp R.H. E30 – Headlamp motor R.H. E31 – Front combination lamp R.H. E33 – Horn-high E34 – Condenser fan motor E35 – Horn-low E36 – Headlamp motor L.H. E37 – Headlamp L.H. E39 – Front combination lamp L.H. E40 – Front side marker lamp L.H. E41 – Body ground E42 – Relay box E43 – Dropping resistor E44 – Compressor E46 – A.I.V. control solenoid valve E47 – Brake fluid level switch E50 – Windshield wiper amplifier E51 – To engine room harness (E28) E52 – Front fog lamp R.H. E53 – Front fog lamp L.H. E54 – Front wheel sensor L.H. E55 – Body ground E56 – Actuator E57 – Wiper amp. E58 – A.S.C.D. actuator E101 – To main harness (M11) E102 – To main harness (M12) E103 – To main harness (M13) E105 – Clutch switch E106 – Key lock solenoid E107 – Key Switch E108 – Ignition switch E109 – Combination switch E110 – Combination switch E111 – Horn switch E112 – Steering switch E113 – Windshield wiper and washer switch E114 – To E.F.I. harness (F3) E115 – To E.F.I. harness (F4) E116 – To E.F.I. harness (F5) E117 – A/T control unit E118 – A.S.C.D. control unit Engine (E.F.I.) Harness F1 – To main harness (M53) F2 – E.C.C.S. control unit F3 – To engine room harness (E114) F4 – To engine room harness (E115) F5 – To engine room harness (E116) F8 – To engine room harness (E9) F9 – To engine room harness (E10) F10 – F.I.C.D. solenoid valve F11 – A.A.C. valve F12 – Injector no. 4 F13 – Air regulator F14 – Injector no. 3 F15 – Pressure regulator control solenoid valve F16 – S.C.V. control solenoid valve F17 – Exhaust gas sensor F18 – Injector no. 2 F19 – Injector no. 1 F20 – Engine ground F21 – Crank angle sensor F22 – Engine temperature sensor F23 – Thermal transmitter F24 – Throttle valve switch F25 – Throttle sensor F26 – E.G.R. control solenoid valve F27 – Air flow meter F28 – Tacho resistor F29 – Condenser F30 – Ignition coil F31 – Power transistor F32 – Front wheel sensor R.H. Lower Engine Harness (A/T) E201 – To engine room harness (E11) E202 – To engine room harness (E17) E203 – To engine room harness (E18) E204 – To engine room harness (E19) E205 – Battery E206 – Power steering oil pressure switch E207 Alternator E208 – Oil pressure switch E209 – Starter motor E210 – Exhaust gas temperature sensor E211 – Vehicle speed sensor E212 – Back-up lamp switch E213 – Neutral switch E214 – 5th position switch Instrument Panel Harness 11 – To main harness (M47) 12 – To main harness (M48) 13 – Head-up display control unit 14 – Combination meter 15 – Combination meter 16 – Combination meter 17 – Combination meter 18 – Combination meter Door Harness L.H. D1 – To main harness (M18) D2 – To main harness (M19) D3 – Door speaker D4 – Door speaker D5 – Door Mirror Motor D6 – Power window regulator D7 – Power window main switch D8 – Power window amplifier D9 – Door lock actuator D10 – Door lock switch D11 – Door latch switch R.H. D101 – To main harness (M54) D102 – To main harness (M55) D103 – Door speaker D104 – Door speaker D105 – Door mirror motor D106 – Power window regulator D107 – Power window sub switch D108 – Door lock actuator D109 – Door lock switch D110 – Door latch switch Rear Hatch Harness D501 – To main harness (M135) D502 – To main harness (M136) D503 – To main harness (M137) D504 – Rear window defogger D505 – High-mounted stop lamp D506 – To rear wiper sub-harness (D551) D507 – To rear wiper sub-harness (D552) D551 – To back door harness (D506) D552 – To back door harness (D507) D553 – Rear window wiper motor Roof Harness (lamp and sunroof) R1 – To main harness (M56) R2 – To sun roof harness (S1) R3 – Spot lamp R4 – Interior lamp R5 – Interior lamp R6 – Interior lamp R8 – Automatic seat belt front limit switch S1 – To room lamp harness (R2) S2 – Body ground S3 – Sun roof switch S4 – Slide relay – open S5 – Sun roof motor S6 – Safety relay S7 – Slide relay – close S8 – Safety limit switch EDIT: Notice the last picture....Engrish at it's best, "Room Ramp". __________________ Last edited by burnsauto; 11-19-2009 at 09:07 AM..

11-18-2009, 09:45 PM	#2
ballinnmiami240sx Zilvia Junkie Join Date: Jan 2005 Location: gloucester, VA Age: 42 Posts: 517 Trader Rating: (6) Feedback Score: 6 reviews	good work. I have something similar __________________ 1994 FD3S Drift // 945garage // sumospeed.com

11-20-2009, 12:12 AM	#3
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	Haha, that's cool, now you don't have to flip pages back and forth. What we really need (and I plan on putting together in the supposedly-upcoming wiring section) is pinouts/wire colors to all these plugs, or at least the important ones. __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

11-20-2009, 12:17 AM	#6
Wake Premium Member Join Date: Dec 2003 Location: Santa Cruz, ca Age: 38 Posts: 6,699 Trader Rating: (8) Feedback Score: 8 reviews	yes Jordan that is a damn good idea, but all the info the op posted is readily avail in chiltons and FSM's. but if you need any help with that Jordan let me know because I have 2 S13's worth of wiring harnesses, and I mean complete uncut harnesses so if you need to know the wire colors coming or going from anything Im sure I can help. Seriously let me know. __________________ S.P.P.S. Member #00 CoUpe LOve Member #00

11-22-2009, 11:47 AM	#10
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Pruned to stay on-topic. Last edited by g6civcx; 11-22-2009 at 12:26 PM..

11-22-2009, 11:12 AM	#8
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	I would love something like this for S13 SR since the FSM is not available in English.

11-22-2009, 11:40 AM	#9
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 38 Posts: 9,006 Trader Rating: (106) Rides Gallery: racepar1 Feedback Score: 106 reviews	Good info I guess, but I just don't see the usefulness of the info you posted. Maybe it's just because I have access to wiring diagrams and could likely route an s-13 wiring harness with my eyes shut. I've kinda worked on a LOT of s-13's, including stripping them down to bare chasis and starting over. Once again good thought, I'm just not sure how much it will really help.

11-22-2009, 11:59 AM	#12
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Pruned to stay on-topic. Last edited by g6civcx; 11-22-2009 at 12:26 PM..

11-23-2009, 09:41 PM	#14
godrifttoday Post Whore! Join Date: Jan 2004 Location: los angeles Age: 37 Posts: 3,120 Trader Rating: (82) Feedback Score: 82 reviews	i got the sohc and dohc in pdf

11-22-2009, 12:33 PM	#15
xplicit240 Zilvia Addict Join Date: Oct 2005 Location: Weird NJ! Age: 36 Posts: 723 Trader Rating: (0) Feedback Score: 0 reviews	thanks burns. this is useful to those who DOES NOT know (ie. myself) i will be tackling a wiring tuck so im sure this will be handy and now its bookmarked. EDIT: now im just waiting for the colors =) __________________

11-23-2009, 01:13 PM	#16
burnsauto Premium Member Join Date: Dec 2006 Location: 717, PA Age: 35 Posts: 3,153 Trader Rating: (5) Rides Gallery: burnsauto Feedback Score: 5 reviews	yeah i mean this info wasn't presented to teach the guys who've owned a dozen s chassis. I still like to think that zilvia is a place to get good info and can actually be used as a good resource. I just like putting what I have out there, and positively contributing to this site. If we all did the same (put out all the unbiased info we had) we would have fewer threads clogging stuff up with questions you can get from said info. __________________

11-23-2009, 03:52 PM	#17
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	Honestly, your stuff won't really help me either because I prefer to use my hardcopy of the SOHC FSM, but it will help me help others by having something to point to.

11-23-2009, 08:27 PM	#18
burnsauto Premium Member Join Date: Dec 2006 Location: 717, PA Age: 35 Posts: 3,153 Trader Rating: (5) Rides Gallery: burnsauto Feedback Score: 5 reviews	i figured i can't hurt. Better than posting my "build" thread... __________________

11-23-2009, 09:03 PM	#19
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	I personally have nothing against "build" threads. They give me ideas on what the parts look like.

11-23-2009, 09:17 PM	#21
240sxvaj Nissanaholic! Join Date: Dec 2007 Location: So-Cal! Age: 31 Posts: 2,192 Trader Rating: (38) Feedback Score: 38 reviews	SWEET! Now my life is a LITTLE easier lol!

11-23-2009, 11:56 PM	#22
jzepol1985 Zilvia Junkie Join Date: Jul 2008 Location: Fresno Posts: 481 Trader Rating: (5) Feedback Score: 5 reviews	Thanks for the info

01-27-2010, 11:05 PM	#23
s14gmo Zilvia FREAK! Join Date: Sep 2007 Location: San diego CA / Charlotte NC Age: 32 Posts: 1,196 Trader Rating: (29) Feedback Score: 29 reviews	anyone know where i can get a full wiring diagram of a s14 k's interior harness.

04-24-2010, 11:55 AM	#28
BoxMan Leaky Injector Join Date: Oct 2008 Location: Rialto, CA Age: 31 Posts: 149 Trader Rating: (2) Feedback Score: 2 reviews	How would I access grounds m101 and m125? I can't see where they are in the picture...

04-25-2010, 05:09 PM	#30
yellowxhoodie Zilvia FREAK! Join Date: Dec 2009 Location: Chicago Posts: 1,092 Trader Rating: (12) Feedback Score: 12 reviews	This will def. help me figure out what i need to put back in and where i need to put it after i finish painting my interior. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode