Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 09-23-2020, 05:13 PM   #1
yangboi30
 
Join Date: Mar 2017
Location: Sacramento
Posts: 6
Trader Rating: (0)
yangboi30 is an unknown quantity at this point
Feedback Score: 0 reviews
No spark no fuel

Got a s13 Sr20det. Car ran great before. Recently installed tomei drop in poncams. After letting it sit overnight and tried starting next day, the car just cranks and does not start. Fuel is not priming. Hardwire fuel pump to get it to prime but still cranks and doesn?t start. Checked all fuses and relays and all are good. Weird thing is after many times cranking it, it finally started and timing was off bad. Car then starts and shut off fine and while adjusting timing, a small rev up to 2k rpm , car then died again n couldn?t get it to start. Fuel pump never prime even tho it started for a bit. Any ideas on what?s causing this?


Sent from my iPhone using Tapatalk
yangboi30 is offline   Reply With Quote
Sponsored Links
Old 09-23-2020, 06:45 PM   #2
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,497
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
Did you install cas properly? Is the connector plugged in correctly? No bent pins or loose wires on it?
S14rebuild is offline   Reply With Quote
Old 09-23-2020, 08:46 PM   #3
yangboi30
 
Join Date: Mar 2017
Location: Sacramento
Posts: 6
Trader Rating: (0)
yangboi30 is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by S14rebuild View Post
Did you install cas properly? Is the connector plugged in correctly? No bent pins or loose wires on it?

Connectors is plugged in correctly and there?s no bent/loose wires on it. Cas was install with cylinder 1 on tdc. When I remove the cas in the first place, cylinder 1 was at tdc and the markings on the pulley was second to the left at 0 degree but when I put the cas back on cylinder 1 was at tdc and if I remember correctly I think the pulley marking wasn?t at second to left marking. Could the cas cause fuel pump to not prime?


Sent from my iPhone using Tapatalk
yangboi30 is offline   Reply With Quote
Old 09-24-2020, 11:46 AM   #4
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,497
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
The cas has to be installed properly

https://frsport.com/How-To-Set-Crank...gine_t_25.html

Set the timing properly, then go from there

Is your ecu light on with key on?
S14rebuild is offline   Reply With Quote
Old 10-06-2020, 12:18 PM   #5
yangboi30
 
Join Date: Mar 2017
Location: Sacramento
Posts: 6
Trader Rating: (0)
yangboi30 is an unknown quantity at this point
Feedback Score: 0 reviews
Turns out to be a bad ecu not grounding the fuel pump relay. Replaced with another ecu and everything starts up fine now. Thanks for the help btw!


Sent from my iPhone using Tapatalk
yangboi30 is offline   Reply With Quote
Old 10-06-2020, 01:47 PM   #6
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,497
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
congrats! Glad it all worked out!
S14rebuild is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:58 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™