Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 10-03-2010, 02:51 PM   #1
Destructodc74
Zilvia Junkie
 
Join Date: Aug 2009
Location: ny
Posts: 442
Trader Rating: (7)
Destructodc74 is an unknown quantity at this point
Feedback Score: 7 reviews
s13 sr running backwards, rich at idle lean in boost-help

i have an s13 with a redtop sr
-fmic and full exhaust
-walbro 255
-stock boost with an s14 t28

the car runs pig rich at idle. like in the 11s, (i have a wideband) and starts going lean after 4k rpms ive done the following
-boost leak test
-changed fuel pump
-new z32 fuel filter
-wired fuel pump directly to the battery has 13.5 volts running now
-changed fpr with known good one
-changed maf

any ideas? it has to be an electrical problem. it started after i let my car sit 2 days without a battery and relocated the battery to the back seat due to puncturing my old battery i had up front.
someone point me in the right direction please
Destructodc74 is offline   Reply With Quote
Sponsored Links
Old 10-04-2010, 07:48 AM   #2
Destructodc74
Zilvia Junkie
 
Join Date: Aug 2009
Location: ny
Posts: 442
Trader Rating: (7)
Destructodc74 is an unknown quantity at this point
Feedback Score: 7 reviews
noone has any input?
Destructodc74 is offline   Reply With Quote
Old 10-08-2010, 03:13 PM   #3
knate
Leaky Injector
 
Join Date: Feb 2005
Location: Washington
Posts: 117
Trader Rating: (0)
knate is just really niceknate is just really niceknate is just really niceknate is just really niceknate is just really niceknate is just really niceknate is just really niceknate is just really niceknate is just really nice
Feedback Score: 0 reviews
Where are you connecting your boost/vacuum to the FPR from? It sounds like there might be a leak in that source. Under vacuum your FPR should be leaning it out some, and under boost should be increasing pressure to make it more rich.

Make sure you have a good solid line going to the manifold somewhere with no leaks. Maybe when replacing the battery the other end of that hose came loose?
knate is offline   Reply With Quote
Old 10-11-2010, 11:31 AM   #4
Destructodc74
Zilvia Junkie
 
Join Date: Aug 2009
Location: ny
Posts: 442
Trader Rating: (7)
Destructodc74 is an unknown quantity at this point
Feedback Score: 7 reviews
Quote:
Originally Posted by knate View Post
Where are you connecting your boost/vacuum to the FPR from? It sounds like there might be a leak in that source. Under vacuum your FPR should be leaning it out some, and under boost should be increasing pressure to make it more rich.

Make sure you have a good solid line going to the manifold somewhere with no leaks. Maybe when replacing the battery the other end of that hose came loose?
thanks for the input. but i actually figured it out. when i let my car sit i forgot i rewired my fans to turn on with the key and i jumped the power from the 12v wire on the harness... yeah dont do that lol. it was sucking all the power from my harness so my ignition system was failing causing it to run rich at idle and choke out under high rpms. i now have my fans running off a relay instead. thanks for the help though!
Destructodc74 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:09 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™