Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 06-16-2019, 02:35 PM   #1
marc-s13
 
marc-s13's Avatar
 
Join Date: Jun 2017
Location: Canada
Age: 20
Posts: 47
Trader Rating: (0)
marc-s13 is on a distinguished road
Feedback Score: 0 reviews
s13 S13 Brake Swap Sticking (R32 GT-R)

Here's the specs of everything:
1990 S13 Hatch (ABS)
S13 Automatic brake booster
Z32 Master
R32 GT-R non brembo front brakes
Chasebays braided SS conversion lines

I bled the two fronts and the abs module yesterday. There is no air in the lines.

When the car is rolling in neutral and I cut the engine, I can hear the pad rubbing on the rotor. There's no gap between the pad and the rotor ever. The pistons don't want to retract.

I took the pads out, and had a friend press the pedal a bit. The pistons do not compress evenly. I tried greasing the slider pins, but it didn't help, and that's not the issue if the pistons still didn't retract with the pads out.

Few things I think could be the problem:
- I rebuilt them wrong (I don't know... both sides? Seems unlikely to me. I think I did it correctly)
- I was using old brake fluid (not previously used, just sitting for a while)
- Maybe there's still some air in the system? Don't know how this could be... Maybe I didn't let the caliper fill properly.
- Maybe my automatic booster is the issue
- Unadjusted push rod on booster? Still feel some play at the top of the pedal, so I don't know if that could be it.

Any help is appreciated.
marc-s13 is offline   Reply With Quote
Sponsored Links
Old 06-16-2019, 08:04 PM   #2
nisileighty
Zilvia FREAK!
 
nisileighty's Avatar
 
Join Date: Feb 2016
Location: Seattle, WA
Posts: 1,215
Trader Rating: (4)
nisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of lightnisileighty is a glorious beacon of light
Feedback Score: 4 reviews
Had the same issue, make sure your brakes aren’t upside down (on the wrong side). If I recall correctly the bleeder should be on the top.
nisileighty is offline   Reply With Quote
Old 06-16-2019, 08:05 PM   #3
marc-s13
 
marc-s13's Avatar
 
Join Date: Jun 2017
Location: Canada
Age: 20
Posts: 47
Trader Rating: (0)
marc-s13 is on a distinguished road
Feedback Score: 0 reviews
Quote:
Originally Posted by nisileighty View Post
Had the same issue, make sure your brakes aren’t upside down (on the wrong side). If I recall correctly the bleeder should be on the top.
Both bleeders on top.
marc-s13 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:59 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™