haha kat 300zx build. - Page 5 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Future_gohan · 04-10-2011, 09:23 PM

Quote:

Originally Posted by Darkvillin

im assuming this is similar to if you had an s14/13 and were doing this swap. are there mount kits available? are you making your own? are you going to have a manual setup or auto? isn't the cost of this going to be similar to the cost of the ls1?

I didn't change swaps to really lower the price(thought it helps), but to be able to finish it faster.

To accomplish this on a 240 you gotta make headers and stuff, the factory ones fit on my car.

Future_gohan · 04-24-2011, 02:08 AM

18x10 rear 18x8.5 front real 3 piece wheels. rears are welded so they're only a two piece, the fronts i'm going to tear apart and get them to be 10's up front.

Future_gohan · 04-27-2011, 07:43 PM

I did all the fitting to my wheels, I didn't notice it I guess but I think my one rear side is pulled out more than the other. idunno yet.

So that's all done.

I cut up my lca's and shortened them to add some + camber in the front untill i decide to make custom ones.

I mounted my k-sport ebrake and welded it to the trans tunnel, with all the interior in it looks pretty factory I'm pumped about that, i just gotta run the lines.

I sat my motor in, and said fuck.

Idk how the shit is suppose to clear the hood, but i'll figure it out, cutting my hood isn't an option.

Michael_6260 · 04-27-2011, 09:09 PM

i have a Z32 im trying to tune it up its NA but i got it for a good price and it has 86k miles i wanna get a KAKIMOTO exhaust and brembo breaks on it u guys know where i can find japanese stuff from japan here in the US?

irax · 04-28-2011, 02:15 AM

there is no way to fit that engine without cutting the hood

shiftdrift · 04-28-2011, 08:31 AM

Quote:

Originally Posted by irax

there is no way to fit that engine without cutting the hood

Who needs a hood?

PoorMans180SX · 04-28-2011, 08:42 AM

Notch the crossmember and modify the oil pan and pickup. You'll probably have to make a custom intake manifold too.

M11's · 04-28-2011, 09:02 AM

what coils are you on

Future_gohan · 04-28-2011, 09:02 AM

my hood clears everyone calm down

irax · 04-29-2011, 03:54 AM

cool, this would be the only 450zx that I've seen that was able to close the hood.

can't wait to to see the pics of this black magic!

Future_gohan · 04-29-2011, 09:08 AM

well i already test fitted it and the hood does close, barly but it does

irax · 04-29-2011, 03:59 PM

Quote:

Originally Posted by Future_gohan

HAHAHAH that shit doesn't count.... how did I know that this was going to happen. Should of said something about not using hood spacers too. Damn here I was hoping for a stock hood line.

shiftdrift · 04-30-2011, 11:35 PM

Looking good man

Future_gohan · 05-01-2011, 10:34 PM

Quote:

Originally Posted by irax

HAHAHAH that shit doesn't count.... how did I know that this was going to happen. Should of said something about not using hood spacers too. Damn here I was hoping for a stock hood line.

Well theoretically I could space the lower crossmember down an inch, and would then clear the stock hood. But my car is slammed so i'm not doing that because I need all the clearances i can get.

Corbic · 05-31-2011, 04:47 PM

WTF happened to the KA-T?

sexcii-zenki · 10-09-2011, 04:36 PM

i luv it...im actually waitin on some girl to hopefully sell me her convertable Z she smacked it up on the right front and it an auto so i was plannin on dumping the vq and swap 4 maybe a rb or a vh...but after seeing this...hmmmmmmmmmmmmmm...maybe, keep it up though...

PoorMans180SX · 10-10-2011, 03:37 PM

Convertible 300zx's are ghey.

Love the VH swap gohan! Keep it up!

shiftdrift · 10-10-2011, 04:03 PM

Quote:

Originally Posted by PoorMans180SX

Convertible 300zx's are ghey.

Love the VH swap gohan! Keep it up!

I think he means 350z. He said dump the vq, not dump the vg

sexcii-zenki · 10-10-2011, 11:29 PM

Quote:

Originally Posted by shiftdrift

I think he means 350z. He said dump the vq, not dump the vg

na i meant the vg typo i was using my fone...

04-24-2011, 02:08 AM	#122
Future_gohan Zilvia Addict Join Date: Mar 2009 Location: Pittsburgh, PA Age: 31 Posts: 919 Trader Rating: (5) Feedback Score: 5 reviews	18x10 rear 18x8.5 front real 3 piece wheels. rears are welded so they're only a two piece, the fronts i'm going to tear apart and get them to be 10's up front. __________________

04-27-2011, 07:43 PM	#123
Future_gohan Zilvia Addict Join Date: Mar 2009 Location: Pittsburgh, PA Age: 31 Posts: 919 Trader Rating: (5) Feedback Score: 5 reviews	I did all the fitting to my wheels, I didn't notice it I guess but I think my one rear side is pulled out more than the other. idunno yet. So that's all done. I cut up my lca's and shortened them to add some + camber in the front untill i decide to make custom ones. I mounted my k-sport ebrake and welded it to the trans tunnel, with all the interior in it looks pretty factory I'm pumped about that, i just gotta run the lines. I sat my motor in, and said fuck. Idk how the shit is suppose to clear the hood, but i'll figure it out, cutting my hood isn't an option. __________________

04-28-2011, 02:15 AM	#125
irax Post Whore! Join Date: Aug 2003 Location: San Diego Age: 37 Posts: 4,248 Trader Rating: (4) Feedback Score: 4 reviews	there is no way to fit that engine without cutting the hood __________________ Drives a BRZ and is building a V6 S12 coupe.

04-28-2011, 08:42 AM	#127
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 33 Posts: 5,430 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	Notch the crossmember and modify the oil pan and pickup. You'll probably have to make a custom intake manifold too. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

04-28-2011, 09:02 AM	#129
Future_gohan Zilvia Addict Join Date: Mar 2009 Location: Pittsburgh, PA Age: 31 Posts: 919 Trader Rating: (5) Feedback Score: 5 reviews	my hood clears everyone calm down __________________

04-27-2011, 09:09 PM	#124
Michael_6260 Join Date: Apr 2011 Location: California Age: 28 Posts: 38 Trader Rating: (0) Feedback Score: 0 reviews	i have a Z32 im trying to tune it up its NA but i got it for a good price and it has 86k miles i wanna get a KAKIMOTO exhaust and brembo breaks on it u guys know where i can find japanese stuff from japan here in the US?

04-28-2011, 09:02 AM	#128
M11's Zilvia Junkie Join Date: Nov 2009 Location: Liberty Lake, Wa Age: 30 Posts: 334 Trader Rating: (1) Feedback Score: 1 reviews	what coils are you on

04-29-2011, 03:54 AM	#130
irax Post Whore! Join Date: Aug 2003 Location: San Diego Age: 37 Posts: 4,248 Trader Rating: (4) Feedback Score: 4 reviews	cool, this would be the only 450zx that I've seen that was able to close the hood. can't wait to to see the pics of this black magic! __________________ Drives a BRZ and is building a V6 S12 coupe.

04-29-2011, 09:08 AM	#131
Future_gohan Zilvia Addict Join Date: Mar 2009 Location: Pittsburgh, PA Age: 31 Posts: 919 Trader Rating: (5) Feedback Score: 5 reviews	well i already test fitted it and the hood does close, barly but it does __________________

04-30-2011, 11:35 PM	#133
shiftdrift Nissanaholic! Join Date: Nov 2009 Location: indiana Age: 31 Posts: 2,242 Trader Rating: (42) Feedback Score: 42 reviews	Looking good man __________________ SW Fab

05-31-2011, 04:47 PM	#135
Corbic Post Whore! Join Date: Jul 2005 Location: US Age: 37 Posts: 8,027 Trader Rating: (8) Feedback Score: 8 reviews	WTF happened to the KA-T?

10-09-2011, 04:36 PM	#136
sexcii-zenki Zilvia Junkie Join Date: May 2011 Location: neu joyzee Posts: 357 Trader Rating: (10) Feedback Score: 10 reviews	i luv it...im actually waitin on some girl to hopefully sell me her convertable Z she smacked it up on the right front and it an auto so i was plannin on dumping the vq and swap 4 maybe a rb or a vh...but after seeing this...hmmmmmmmmmmmmmm...maybe, keep it up though...

10-10-2011, 03:37 PM	#137
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 33 Posts: 5,430 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	Convertible 300zx's are ghey. Love the VH swap gohan! Keep it up! __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode