ATI pulley on sr20 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Options13 · 07-14-2015, 02:11 AM

I recently bought an ATI pulley and for some reason its not slipping all the way on?

It almost seems like it is hitting the spacer so it physically can't go on any further, the crank pulley does not line up with the rest of the pulleys. It's about .25 of an inch off..

anyone have any ideas? I can't find anything on this subject..

*TheRealSy90* · 07-14-2015, 02:20 AM

Never heard of anybody having this problem, all I know is that if you use it on a fwd sr you have to use a collar on the crank to space it out a little farther.

Did you get the part number 918582?

Options13 · 07-14-2015, 02:52 AM

thats what is says on the box, is that supposed to be stamped on the pulley anywhere?

on the back of the pulley its stamped 990916, but on the box its stamped 918582... not sure whats going on..

anyway does my spacer look like its on all the way? it doesn't go in any further..

heres what the pulley looks like

you can see that it needs to come towards the crank more..

*TheRealSy90* · 07-14-2015, 03:29 AM

You don't have to use the spacer on rwd sr20's, like I said before it's only needed on fwd sr20's.

Options13 · 07-14-2015, 03:34 AM

Why is my pulley spaced out so much?

soundboy · 07-14-2015, 10:24 AM

Take out the spacer.

Options13 · 07-14-2015, 11:40 AM

lol that spacer is what helps the oil pump do its job..

JSimpson · 07-14-2015, 05:13 PM

Quote:

Originally Posted by Options13

Why is my pulley spaced out so much?

You have to machine it 3mm, this goes for ALL VE RWD swaps in order to get the pulleys to line up. Should have had Mazworx build your motor for you, it would already have been done

What oil pump are you using? It doesn't look like a fwd pump.

Quote:

Originally Posted by soundboy

Take out the spacer.

NO NO NO! Do NOT do this.

*e1_griego* · 07-14-2015, 05:25 PM

It's a stock DET, not a VE.

*TheRealSy90* · 07-15-2015, 03:51 AM

It looks to me like it has an additional spacer on top of the one inside the oil pump. Which is what you would do when using this pulley on the fwd sr20. Some of the ATI pulley kits come with the spacer.

It is not required for rwd sr. However if it doesn't have an additional spacer on the crank and it's only the oil pump drive, you must have the wrong pulley. Machining is only needed when using the ve pump.

Sent from my iPhone using Tapatalk

Kingtal0n · 07-15-2015, 04:19 AM

as a side note. I do not see a front main seal on that oil pump.

Options13 · 07-15-2015, 12:46 PM

yeah i removed it to see what was going on... the thing is on the box it says i have the right pulley.. for a RWD sr20, i do not have an additional spacer either.

Options13 · 07-15-2015, 04:18 PM

so i found out i have the wrong spacer on my engine.. how the hell do i remove that thing..? do i need to take the front cover off?

07-14-2015, 02:11 AM	#1
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	ATI pulley on sr20 I recently bought an ATI pulley and for some reason its not slipping all the way on? It almost seems like it is hitting the spacer so it physically can't go on any further, the crank pulley does not line up with the rest of the pulleys. It's about .25 of an inch off.. anyone have any ideas? I can't find anything on this subject.. __________________ Drift team page www.facebook.com/savageimpression

07-14-2015, 02:52 AM	#3
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	thats what is says on the box, is that supposed to be stamped on the pulley anywhere? on the back of the pulley its stamped 990916, but on the box its stamped 918582... not sure whats going on.. anyway does my spacer look like its on all the way? it doesn't go in any further.. heres what the pulley looks like you can see that it needs to come towards the crank more.. __________________ Drift team page www.facebook.com/savageimpression

07-14-2015, 03:34 AM	#5
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	Why is my pulley spaced out so much? __________________ Drift team page www.facebook.com/savageimpression

07-14-2015, 11:40 AM	#7
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	lol that spacer is what helps the oil pump do its job.. __________________ Drift team page www.facebook.com/savageimpression

07-15-2015, 12:46 PM	#12
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	yeah i removed it to see what was going on... the thing is on the box it says i have the right pulley.. for a RWD sr20, i do not have an additional spacer either. __________________ Drift team page www.facebook.com/savageimpression

07-14-2015, 10:24 AM	#6
soundboy Zilvia Junkie Join Date: Aug 2013 Location: trinidad Age: 41 Posts: 320 Trader Rating: (0) Feedback Score: 0 reviews	Take out the spacer.

07-14-2015, 05:25 PM	#9
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	It's a stock DET, not a VE.

07-15-2015, 04:19 AM	#11
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 38 Posts: 4,646 Trader Rating: (17) Feedback Score: 17 reviews	as a side note. I do not see a front main seal on that oil pump.

07-15-2015, 04:18 PM	#13
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	so i found out i have the wrong spacer on my engine.. how the hell do i remove that thing..? do i need to take the front cover off? __________________ Drift team page www.facebook.com/savageimpression

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode