right low beam doesnt work - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s13fiasco · 01-26-2015, 08:52 PM

So Im new here and I'm hoping some of the electrical gurus could help me out . as stated my right low beam doesn't work. I've put in a new combination switch and a headlight timer and nothing. I've found out that there is no power going to the relay that is on the drivers side of the car that controls the right headlight.(the relays work) Been searching the forums and found other posts that were similar but didn't solve my problem so this is my last resort. I've been staring at the wiring diagram for a while now and nothing.

would love the help because driving to my night class with one low beam sucksssss.

B-Man92 · 02-06-2015, 06:37 PM

Stupid question, the bulb isn't burnt/broken is it? If it is in good shape then check the voltage going to the headlight. I'm pretty sure it's the P/B wire. Unplug the connector put the positive lead on that wire and the negative on a GOOD ground. Make sure your lights are on, or supposed to be on. Your voltmeter should read battery voltage. If it doesn't, then keep tracking the problem down that wire. If it does then your bulb is bad.

angel mkiv · 02-06-2015, 11:12 PM

And your sure the actual headlamp isn't out? Maybe trying switching the lamps and see if that's the issue before wasting more time?

jr_ss · 02-07-2015, 08:09 AM

I've got money on a bad bulb.

Croustibat · 02-07-2015, 04:16 PM

Quote:

I've put in a new combination switch

by new, do you mean something you bought second hand, or new new ?

Because that typically is a combination switch problem. disassemble it, clean it, and you are done. It is quite easy to do.

01-26-2015, 08:52 PM	#1
s13fiasco Join Date: Jan 2015 Location: california Posts: 12 Trader Rating: (2) Feedback Score: 2 reviews	right low beam doesnt work So Im new here and I'm hoping some of the electrical gurus could help me out . as stated my right low beam doesn't work. I've put in a new combination switch and a headlight timer and nothing. I've found out that there is no power going to the relay that is on the drivers side of the car that controls the right headlight.(the relays work) Been searching the forums and found other posts that were similar but didn't solve my problem so this is my last resort. I've been staring at the wiring diagram for a while now and nothing. would love the help because driving to my night class with one low beam sucksssss. Last edited by s13fiasco; 01-26-2015 at 09:49 PM..

02-06-2015, 11:12 PM	#3
angel mkiv Zilvia Addict Join Date: Sep 2009 Location: Seattle, wa Posts: 725 Trader Rating: (4) Feedback Score: 4 reviews	And your sure the actual headlamp isn't out? Maybe trying switching the lamps and see if that's the issue before wasting more time? __________________ Instagram username:angelmkiv

02-07-2015, 08:09 AM	#4
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,052 Trader Rating: (34) Feedback Score: 34 reviews	I've got money on a bad bulb. __________________ My SR20VET

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-06-2015, 06:37 PM	#2
B-Man92 Join Date: Feb 2013 Location: knoxville Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	Stupid question, the bulb isn't burnt/broken is it? If it is in good shape then check the voltage going to the headlight. I'm pretty sure it's the P/B wire. Unplug the connector put the positive lead on that wire and the negative on a GOOD ground. Make sure your lights are on, or supposed to be on. Your voltmeter should read battery voltage. If it doesn't, then keep tracking the problem down that wire. If it does then your bulb is bad.