eazye2000

Location: Hanscom AFB, MA
Contact Info:
AIM- EazyE4you
MSN- e_appie(at)hotmail.com

Some stuff I have kicking around the house that I'm finally willing to part with for the right price. The S14 still isn't sold, so I'm kind of weary about putting this stuff out there. But she's on craigslist, and local forums.


S14 SE wheels. Standard 5-lug, 5 star pattern.
I have eight (8) total. Four (4) are just wheels. The other four (4) have Falken Azenis' mounted to them. 215/45/16. Still in good shape.
85 bucks for a set (4).
135 bucks for a set (4) with the tires.

S14 SE 5-Lug Hubs.
Stock S14 hubs front and rear. One rear hub had a ding in the grease seal. I took it out, was going to straighten it out, and never put it back in. I can/will do this before they leave. Metal has ding, not rubber.
200 bucks for all four (4)

S14 SE Rear Sway Bar.
Plain as it is. Would like to keep and let it go with the car for some brownie points, but if you need it, let me know.
35 bucks O.B.R.O.

Z32 30mm Aluminum Brakes.
All four (4) corners. Have been bead blasted to bare metal, and painted black with caliper paint. The 'Nissan' has been polished. They are loaded with semi-metalic pads front and rear. I have ft/rr rotors too.
300 bucks for all four (4)

Z32-to-240sx Brake Conversion Lines.
Stainless braided lines to allow installation of Z32 brakes on either model 240sx.
90 bucks for all four (4)

******SOLD******
Z32 Rear Aluminum Knuckle/Uprights/E-Brake.
******SOLD******

5-Speed Swap Stuff.
Manual Transmission, Flywheel, Stock Used Clutch/PP, Crossmember, Bolts for Flywheel/Pressure Plate/Crossmember, Clutch/Brake/Gas Pedals(S14), Clutch Master and Slave.
Cant find line from master to slave. 1-piece stainless braided can be had for $40 online.
300 bucks for everything.

RHD JDM S14 Brake Master.
Line outlets are on 'driver side' as opposed to 'passenger side'.
35 bucks.

Electric Altima Fans
Not sure what year. Dual Electric radiator fans. I pulled them a while back at the junk yard. Looks like they bolt onto a stock 240sx radiator, thats why I got it.
45 bucks

****Adding Parts****

SR Ignitor Chip gimmick
Has pigtails on both sides.
45 bucks

S13 Hood
Pretty mint. Fresh Black paint.
35 bucks

*****SOLD*****
S14 RUCA's
*****SOLD*****

370cc Side Feed Injectors (x4)
Fits KA24DE, VQ45DE, SR20DET. Plugs in directly to stock harness
50 bucks


If you want more than one 'package', let me know. There might be some negotiating I'm willing to do.


Ok, here's some pics for you people.

Z32 30mm Aluminum Front and rears




S14 5-lug hubs. I have front spindles from S14 too.


370cc High Impedance Side Feed injectors with SR20 Ignitor


Z31 Turbo


SR Dump/Elbow, Downpipe, and Cat Delete Resonator


Altima Electric Fans


5-Speed KA Tranny


Some of the parts to go with Tranny. (clutch pedals and parts behind calipers in pics up top)


S14 SE bare wheels. (others outside stacked)


Random stuff. S14 SE Sway bar in there with stock S13 Rear.


S14 Rear Upper Control Arms

chvybeatsford

Injectors fit stock Red top? If so how many miles on them.

eazye2000

90k'something miles. Clips are stock for SR's and KA-DE. Side Feed, and High Impedance. Plug and Play for SR's.
Same for the ignitor. Pulled the injectors and ignitors out of a Q45 that was 'totaled'.

Sold one set of injectors and other ignitor and guys happy with them. Need O-rings for sure.

chvybeatsford

What i mean is will they work with stock tune,?

chvybeatsford

I have brand new Stock sr20det inj orings that should work with them so rings arent any problem. The set i bought last night ended up with one being stuck open. Not good as far as the reason i needed to even buy them is cause mine stuck open too.

eazye2000

Yes they will work with the stock tune. If you had a set with one stuck open, and you bought another set with one stuck open, you should theoretically have 2 good spare injectors left.

Are you positively sure that your injector drivers in your ECU haven't went crazy and fried? Have you tried another ECU? I would hate to sell you something that you don't really need.

chvybeatsford

No had troubles with 3 of mine. The one stuck open and the others firing bad. So i now have a mismatched set. 1 of mine which went through alot of trash from previous owner not changing the complete gas tank after it had filled with rust, lazy person that shouldnt have done the Swap. As far as it being the Ecu it happend on Diff inj #. Fisrt was cyl 2 then cyl 4. the rail i picked up last night had a red inj that he said was 300zx TT. I didnt car cause at the time i really needed only one.

But yes i do need 4 and sure its not ecu realated. Srry was jus ranting a lil.

BTW: i got half my money back since 2 were bad so im not mad at him jus my car.

Jus confirming it is 4 total with plugs?

chvybeatsford

PM sent ...

eazye2000

Yep, 4 total injectors with plugs. The plugs are for someone with an application other than a KA-DE or SR. These injectors plug right into a twin cam KA, or an SR factory plug perfectly. I just snagged the clips because I could.

ctsedan

What brand RUCAs?

eazye2000

No idea. Got them on eBay a while back.

Slammed180

Willing to sell/ship just the rear 5 lug to Canada?

__________________
Blow me, bitches.

eazye2000

Bumping this post one last time. Hopefully some searching can/will find it.

Updated first post a bit. 5-speed, and calipers/lines are pending.

barshini

i am very interested in the black hood...will you ship to california?

hpipro4

nvm....ss lines are pending...i didnt see!!!woops

dt-p88

5 lug hubs still available?? would you ship if so?

aardvark

those look like r32 calipers, no z32.

eazye2000

They are(were), indeed, Z32 calipers.

Calipers and Stainless Lines SOLD.

First thread updated.

shadowsc

part out 5 spd?
i just need the flywheel?? price shipped to 32779?

__________________
*93 S13 Silvia Vert - Ocean Drive Inspired
*00 SC300 - DD

OddyseusDSM

Im interested in the sways, I specifically have an S14 which should be the bigger of the two....unless thats an S13 HICAS.....in which case i'd ask the dimensions and be interested if that would fit on a s14. $25 picked up? possibly sunday if my deal with an engine goes through, if thats good with you.

might pick up a set of wheels while im there if you still got em