HUB ?s - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

180slider · 06-06-2011, 08:49 AM

okk so my friend has has a factory 5 lug conversion for ever now and since it has been installed the car gets crazy death wobble, it never did this when he was 4 lug ive looked over everything and just cant seem to find anything wrong or messed up. so if anybody has had this problem or knows anyone that has had this issue and fixed it i would appericate some help thank.

PoorMans180SX · 06-06-2011, 09:15 AM

Make sure the wheel bearings are good by jacking the car up and shaking the wheel. Also, don't forget that S14 and S13 wheel bearings are torqued to different values, so make sure you have the hub nut torqued down to the right spec.

180slider · 06-06-2011, 09:40 AM

yea ive had the car on stand and shook up and down left and right and the bearing seem to be good. i just dont understand it cause it just happenes randomly happenes while driving it not even consistent somedays it good then orthers its just crazy feels like were going to fly off the road the whole car shakes

180slider · 06-06-2011, 10:08 AM

and the nut is torqued to the right amount

TypeXFan · 06-06-2011, 10:46 AM

So you are using the S14 front hubs and thats it? Nothing else from the S14? Like the Spindle and Lower Control Arm?

180slider · 06-06-2011, 11:11 AM

yea but its on an s14 so all that is already there

camaro379ss · 06-06-2011, 12:14 PM

If you only swapped just the hubs then I would assume there has to be something wrong with a bearing....Is there any other mods that were done at the same time?

Are the wheels you are using stock or aftermarket? How are the wheels centered on the hub? Eccentric ring or jsut using the lugnuts.....

Make sure you have no play in your ball joints...sometimes they seem like they can be fine but when you disconnect them make sure they are not just wiggling around. I found out the hard way on my g35 this past weekend, just because it looks good and doesnt have free play while its attached doesnt mean it wont when you unbolt it.

06-06-2011, 08:49 AM	#1
180slider Zilvia Junkie Join Date: Sep 2007 Location: pa Age: 32 Posts: 307 Trader Rating: (10) Feedback Score: 10 reviews	HUB ?s okk so my friend has has a factory 5 lug conversion for ever now and since it has been installed the car gets crazy death wobble, it never did this when he was 4 lug ive looked over everything and just cant seem to find anything wrong or messed up. so if anybody has had this problem or knows anyone that has had this issue and fixed it i would appericate some help thank. __________________

06-06-2011, 09:15 AM	#2
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 33 Posts: 5,431 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	Make sure the wheel bearings are good by jacking the car up and shaking the wheel. Also, don't forget that S14 and S13 wheel bearings are torqued to different values, so make sure you have the hub nut torqued down to the right spec. __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs.

06-06-2011, 09:40 AM	#3
180slider Zilvia Junkie Join Date: Sep 2007 Location: pa Age: 32 Posts: 307 Trader Rating: (10) Feedback Score: 10 reviews	yea ive had the car on stand and shook up and down left and right and the bearing seem to be good. i just dont understand it cause it just happenes randomly happenes while driving it not even consistent somedays it good then orthers its just crazy feels like were going to fly off the road the whole car shakes __________________

06-06-2011, 10:08 AM	#4
180slider Zilvia Junkie Join Date: Sep 2007 Location: pa Age: 32 Posts: 307 Trader Rating: (10) Feedback Score: 10 reviews	and the nut is torqued to the right amount __________________

06-06-2011, 11:11 AM	#6
180slider Zilvia Junkie Join Date: Sep 2007 Location: pa Age: 32 Posts: 307 Trader Rating: (10) Feedback Score: 10 reviews	yea but its on an s14 so all that is already there __________________

06-06-2011, 10:46 AM	#5
TypeXFan Leaky Injector Join Date: Jun 2010 Location: Fresno, CA Age: 39 Posts: 84 Trader Rating: (1) Feedback Score: 1 reviews	So you are using the S14 front hubs and thats it? Nothing else from the S14? Like the Spindle and Lower Control Arm?

06-06-2011, 12:14 PM	#7
camaro379ss Zilvia Junkie Join Date: Mar 2011 Location: Indianapolis, IN Posts: 363 Trader Rating: (4) Feedback Score: 4 reviews	If you only swapped just the hubs then I would assume there has to be something wrong with a bearing....Is there any other mods that were done at the same time? Are the wheels you are using stock or aftermarket? How are the wheels centered on the hub? Eccentric ring or jsut using the lugnuts..... Make sure you have no play in your ball joints...sometimes they seem like they can be fine but when you disconnect them make sure they are not just wiggling around. I found out the hard way on my g35 this past weekend, just because it looks good and doesnt have free play while its attached doesnt mean it wont when you unbolt it. __________________ 1991 Nissan B13 Sentra sr20det 300whp/1991 Nissan S13 240sx sr20det ~260whp

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode