sr20det - Where do I connect the chain to lift it out? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Jays_240sx · 01-04-2014, 08:28 PM

What points do I connect the chain on my cherry picker to lift out the motor? I'm not sure which spots would be good.

di-devol · 01-04-2014, 08:32 PM

Around intake mani and around exhaust mani with a chain.

Jays_240sx · 01-04-2014, 08:36 PM

Quote:

Originally Posted by di-devol

Around intake mani and around exhaust mani with a chain.

then onto the mounts right?

di-devol · 01-04-2014, 08:38 PM

Quote:

Originally Posted by Jays_240sx

then onto the mounts right?

I just loop one side of the chain around the intake manifold, and the other side to the exhaust manifold.

Jays_240sx · 01-04-2014, 08:40 PM

Quote:

Originally Posted by di-devol

I just loop one side of the chain around the intake manifold, and the other side to the exhaust manifold.

Yea but then where after that? I don't want to lift it out by the 2 mani's. I bring it through them then through the hole in the mount like the little hook on the end of the chain?

di-devol · 01-04-2014, 08:48 PM

So I had the picker hook->to spreader bar with 2 chains->one side wrapped around intake, one side wrapped around exhaust. Hoist away.

Jays_240sx · 01-04-2014, 08:51 PM

Quote:

Originally Posted by di-devol

So I had the picker hook->to spreader bar with 2 chains->one side wrapped around intake, one side wrapped around exhaust. Hoist away.

Will they hold up? I'm not taking the tranny out with it

di-devol · 01-04-2014, 09:05 PM

I did it with the trans, so I pretty sure haha.

*e1_griego* · 01-04-2014, 09:12 PM

Yeah, it's fine.

rbs14kouki · 01-06-2014, 12:21 AM

If you dont wana scratch your manifold of break/ bend a fuel line under the intake !!! Take a seat belt from an old car , cut it off and use it instead of a chain !

It will old your sr !!! I lifted my full rb26 swap with transmisssion back when i did that swap

w.tungsten · 05-21-2020, 06:34 AM

Sorry! I now this thread is MEGA old, but I was unsatisfied with the answers of use the intake and exhaust manifold. This thread shows up via google search. I felt bumping this thread was worth it for people trying to read up what to do. Here are a few options:

Mazworx makes a really affordable option from steel.
https://www.mazworx.com/store/p/194-...-Brackets.aspx
$15! Not bad. They're steel and I think they'd work great.

SS works
https://ssworxs.com/shop/ssworx-part...t-hook-mounts/
$79 which is pretty pricey. Also made in steel. These appear to be lazer or plasma cut.

Personally I didn't love either option, as I wanted something aesthetically pleasing enough to just leave in the engine bay. Removing the rear hook in the car is possible, just difficult.
https://www.theexcitingspirit.com/te...r20-lift-hooks
$45 waterjet aluminum so no need for paint and they won't rust etc. Confirmed them on S13 and S15. As well as the ability to install them with the engine in the car. I'm not 100% either of the other options can be due to the limited space in the back of the head while the engine is installed.

jedi03 · 05-21-2020, 07:34 AM

+1 on use manifolds...when i was scared to do the same i removed manifolds, got some engine hooks off random vehicles in the junkyard, zipped em down one at the front of the engine, the other at the rear (to where manifolds were) and lifted them...i used for a long time a nylon lift strap till it became to oil soaked...using the manifolds is so much less work though

01-04-2014, 08:28 PM	#1
Jays_240sx Join Date: Aug 2013 Location: massachusetts Age: 25 Posts: 43 Trader Rating: (1) Feedback Score: 1 reviews	sr20det - Where do I connect the chain to lift it out? What points do I connect the chain on my cherry picker to lift out the motor? I'm not sure which spots would be good.

01-04-2014, 08:32 PM	#2
di-devol Zilvia FREAK! Join Date: Jun 2010 Location: Woodinville Age: 39 Posts: 1,412 Trader Rating: (5) Feedback Score: 5 reviews	Around intake mani and around exhaust mani with a chain. __________________

01-04-2014, 08:48 PM	#6
di-devol Zilvia FREAK! Join Date: Jun 2010 Location: Woodinville Age: 39 Posts: 1,412 Trader Rating: (5) Feedback Score: 5 reviews	So I had the picker hook->to spreader bar with 2 chains->one side wrapped around intake, one side wrapped around exhaust. Hoist away. __________________

01-04-2014, 09:05 PM	#8
di-devol Zilvia FREAK! Join Date: Jun 2010 Location: Woodinville Age: 39 Posts: 1,412 Trader Rating: (5) Feedback Score: 5 reviews	I did it with the trans, so I pretty sure haha. __________________

01-06-2014, 12:21 AM	#10
rbs14kouki Zilvia Addict Join Date: Oct 2007 Location: Montreal , Canada Age: 35 Posts: 817 Trader Rating: (1) Feedback Score: 1 reviews	If you dont wana scratch your manifold of break/ bend a fuel line under the intake !!! Take a seat belt from an old car , cut it off and use it instead of a chain ! It will old your sr !!! I lifted my full rb26 swap with transmisssion back when i did that swap __________________ AV FABRICATION Built thread sr20vet s14 http://zilvia.net/f/showthread.php?t=535574

01-04-2014, 09:12 PM	#9
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	Yeah, it's fine.

05-21-2020, 06:34 AM	#11
w.tungsten Zilvia Member Join Date: Mar 2007 Location: Ann Arbor, MI Posts: 166 Trader Rating: (4) Feedback Score: 4 reviews	Sorry! I now this thread is MEGA old, but I was unsatisfied with the answers of use the intake and exhaust manifold. This thread shows up via google search. I felt bumping this thread was worth it for people trying to read up what to do. Here are a few options: Mazworx makes a really affordable option from steel. https://www.mazworx.com/store/p/194-...-Brackets.aspx $15! Not bad. They're steel and I think they'd work great. SS works https://ssworxs.com/shop/ssworx-part...t-hook-mounts/ $79 which is pretty pricey. Also made in steel. These appear to be lazer or plasma cut. Personally I didn't love either option, as I wanted something aesthetically pleasing enough to just leave in the engine bay. Removing the rear hook in the car is possible, just difficult. https://www.theexcitingspirit.com/te...r20-lift-hooks $45 waterjet aluminum so no need for paint and they won't rust etc. Confirmed them on S13 and S15. As well as the ability to install them with the engine in the car. I'm not 100% either of the other options can be due to the limited space in the back of the head while the engine is installed.

05-21-2020, 07:34 AM	#12
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,784 Trader Rating: (8) Feedback Score: 8 reviews	+1 on use manifolds...when i was scared to do the same i removed manifolds, got some engine hooks off random vehicles in the junkyard, zipped em down one at the front of the engine, the other at the rear (to where manifolds were) and lifted them...i used for a long time a nylon lift strap till it became to oil soaked...using the manifolds is so much less work though

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode