V8 240sx FAQ - Page 24 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

PattonXX7 · 07-09-2018, 08:20 PM

Does anyone know the difference between an LS1 T56 and an LT1 T56? Pros and cons of having a Lt1 T56 compared to the LS1 T56? Thanks

*afishysilvia* · 07-09-2018, 08:33 PM

Quote:

Originally Posted by PattonXX7

Does anyone know the difference between an LS1 T56 and an LT1 T56? Pros and cons of having a Lt1 T56 compared to the LS1 T56? Thanks

https://ls1tech.com/forums/manual-tr...6-ls1-t56.html

Lots of good stuff here man...

For Chevy stuff honestly LS Tech is superior. For anything S chassis related this is your best bet, that is if you post accordingly

PattonXX7 · 07-09-2018, 08:55 PM

Quote:

Originally Posted by afishysilvia

https://ls1tech.com/forums/manual-tr...6-ls1-t56.html

Lots of good stuff here man...

For Chevy stuff honestly LS Tech is superior. For anything S chassis related this is your best bet, that is if you post accordingly

Ok cool thanks man I’ll give them a try👍🏼

Benfica7 · 11-29-2018, 09:41 AM

From my research, there is not a lot of room to play with for the radiator and fan setup. I've seen that the KA replacements are "good enough", but I don't think they have the cooling power as a dual pass. What do you all recommend?

For my setup of clearance, I will be either using a 5.3/6.0 LM7/LQ9 with ls1 power steering pump, camaro water pump, truck alternator & sikky cold air intake.

*afishysilvia* · 11-29-2018, 09:49 AM

Quote:

Originally Posted by Benfica7

From my research, there is not a lot of room to play with for the radiator and fan setup. I've seen that the KA replacements are "good enough", but I don't think they have the cooling power as a dual pass. What do you all recommend?

For my setup of clearance, I will be either using a 5.3/6.0 LM7/LQ9 with ls1 power steering pump, camaro water pump, truck alternator & sikky cold air intake.

I have a KA godspeed rad and it's not cutting the job here in California. I recently just purchased the Chase Bays tucked radiator that's huge, dual pass and allows for more room with bigger fans. What kit are you running? That does matter as well, but from most of the efficient swaps I've seen they either cut the core support to fit a large radiator and fan setup or they have tubular front ends.

Benfica7 · 11-30-2018, 12:45 PM

I will be using sikky motor mounts and LOJ conversions tranny mount. (I am using a 300zx transmission)

*afishysilvia* · 11-30-2018, 12:56 PM

With sikky I think there should be enough clearance without cutting, id still go with a larger dual pass. But your temps don’t get very warm where you are also.

Benfica7 · 12-03-2018, 02:05 PM

I do plan to go dual pass and fans.

The car has had an LS setup by the previous owner, who parted out and used a KA to then sell for less money. So we shall see what the trans tunnel and front core support look like.

JacksonWh37 · 04-24-2020, 07:38 AM

Hey,
I didn?t see if there was an answer to this question, can the stock rear end take all this torque? Answer me later plz best convection microwave on mykitchenadvisor.com .

gmorrone1214 · 10-31-2020, 03:05 PM

Hey all, I have a S14 with a l96 connected to a 370z 6 speed. Does anyone know of a shifter relocation kit to move it to the stock position?

11-30-2018, 12:56 PM	#697
afishysilvia Premium Member Join Date: Jan 2010 Location: Cali Posts: 3,372 Trader Rating: (30) Rides Gallery: afishysilvia Feedback Score: 30 reviews	With sikky I think there should be enough clearance without cutting, id still go with a larger dual pass. But your temps don’t get very warm where you are also. __________________ Dont be a pussy...Leave your name

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-09-2018, 08:20 PM	#691
PattonXX7 Join Date: Jul 2018 Location: Claremont CA Age: 25 Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	Does anyone know the difference between an LS1 T56 and an LT1 T56? Pros and cons of having a Lt1 T56 compared to the LS1 T56? Thanks

11-29-2018, 09:41 AM	#694
Benfica7 Leaky Injector Join Date: Feb 2017 Location: Massachusetts Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	From my research, there is not a lot of room to play with for the radiator and fan setup. I've seen that the KA replacements are "good enough", but I don't think they have the cooling power as a dual pass. What do you all recommend? For my setup of clearance, I will be either using a 5.3/6.0 LM7/LQ9 with ls1 power steering pump, camaro water pump, truck alternator & sikky cold air intake.

11-30-2018, 12:45 PM	#696
Benfica7 Leaky Injector Join Date: Feb 2017 Location: Massachusetts Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	I will be using sikky motor mounts and LOJ conversions tranny mount. (I am using a 300zx transmission)

12-03-2018, 02:05 PM	#698
Benfica7 Leaky Injector Join Date: Feb 2017 Location: Massachusetts Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	I do plan to go dual pass and fans. The car has had an LS setup by the previous owner, who parted out and used a KA to then sell for less money. So we shall see what the trans tunnel and front core support look like.

04-24-2020, 07:38 AM	#699
JacksonWh37 Join Date: Apr 2020 Location: Los Angeles Age: 22 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Hey, I didn?t see if there was an answer to this question, can the stock rear end take all this torque? Answer me later plz best convection microwave on mykitchenadvisor.com .

10-31-2020, 03:05 PM	#700
gmorrone1214 Join Date: Jul 2017 Location: alaska Age: 30 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Hey all, I have a S14 with a l96 connected to a 370z 6 speed. Does anyone know of a shifter relocation kit to move it to the stock position?