Chase Bays RB20DET, RB25DET, and RB26DETT - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Chase Bays · 10-21-2011, 02:46 PM

We’ve got some great harnesses to show you. Probably a few of the most requested harnesses to be produced by Chase Bays, and here they are. There are so many features these have to offer, this kind of innovation and flexibility has never been done in our industry.

Even though the RB engines are remotely the same harness build, there is about 30 electrical variations. Variants include, coil packs or spark plug wires, coil igniter or integrated igniter, crank/cam sensor & pickups, different ECU’s, injectors, VTC valve, and a few others. We’ve done the research and become very familiar with these variants. So even if you’re not familiar with the electrical components, we are. The harness can plug into, basically anything. We use the same black 16pin connector near the ECU plugs on all of our harnesses. It has all the chassis inputs and outputs you need. The opposite side of this connector is what we adapt to YOUR chassis. When ordering this product on our website it will ask you all the info we need to know via drop down menu’s. This is all the innovation and flexibility mentioned above. Noone else knocks out 20 birds with 1 stone.

Chase Bays RB20DET Engine Harness

CM1 - $649.99
CM2 - $949.99
CM Mil Spec - $1,349.99

Chase Bays RB25DET Engine Harness

CM1 - $649.99
CM2 - $949.99
CM Mil Spec - $1,349.99

Chase Bays RB26DETT Engine Harness

CM1 - $699.99
CM2 - $999.99
CM Mil Spec - $1,399.99

PM for the lowest shipping prices. Find out more info on these harnesses by clicking the product names above

nightsauce · 10-21-2011, 02:51 PM

bump for awesome craftsmanship. I used to make harnesses for my previous job, its a very time consuming task.

landins13 · 10-22-2011, 08:58 AM

you guys should make a plug and play harness to plug s13 kouki tails into the usdm 240sx tail light harness. I know the wiring is easy it would just be nice to not have to cut and splice to install them.

Edwin562 · 10-22-2011, 09:22 AM

Quote:

Originally Posted by landins13

you guys should make a plug and play harness to plug s13 kouki tails into the usdm 240sx tail light harness. I know the wiring is easy it would just be nice to not have to cut and splice to install them.

^^^this would be nice...

sleeper108 · 10-22-2011, 09:59 AM

Do we need to supply harnesses, or are these already premade?

I've bee looking at wiring options recently, I decided I wont do mine

drivnovrdaedge · 10-31-2011, 02:45 PM

Your inbox was full

Wondering if u guys could wire up the chase boy 1jzgte harness so that it could connect to the body harness of a 1988 BMW 325is instead of s13 or s14... I have the bmw engine harness I can send along with the 1 jzgte harness

Was also wondering if u have pics or the race relay board / fuse box. ..

Chase Bays · 11-04-2011, 05:21 PM

Quote:

Originally Posted by sleeper108

Do we need to supply harnesses, or are these already premade?

I've bee looking at wiring options recently, I decided I wont do mine

You supply your RB harness, and if you have an S14 you supply the KA and RB.

Chase Bays · 11-04-2011, 05:23 PM

Quote:

Originally Posted by drivnovrdaedge

Your inbox was full

Wondering if u guys could wire up the chase boy 1jzgte harness so that it could connect to the body harness of a 1988 BMW 325is instead of s13 or s14... I have the bmw engine harness I can send along with the 1 jzgte harness

Was also wondering if u have pics or the race relay board / fuse box. ..

Yes we can do that. For those pictures, i'll have to check.

Chase Bays 1JZ/2JZ Engine Harness

BlewByYou · 05-14-2012, 05:14 PM

Weird but if these are brand new harness, why do you charge an extra $150 for a stock old worn out harness?

chris300zr · 05-15-2012, 12:39 PM

As much as l would like a $1,350 mil spec harness, I am going to attempt this on my own with the 25 and see how badly I biff it.

Bump for CB, there P/S and brake kits are TITS.

ch1873857 · 05-15-2012, 01:37 PM

Quote:

Originally Posted by BlewByYou

Weird but if these are brand new harness, why do you charge an extra $150 for a stock old worn out harness?

quote for GOOD ass question.........

10-21-2011, 02:46 PM	#1
Chase Bays Zilvia Junkie Join Date: Jun 2010 Location: Birmingham, AL Posts: 359 Trader Rating: (1) Feedback Score: 1 reviews	Chase Bays RB20DET, RB25DET, and RB26DETT Engine Harnesses We’ve got some great harnesses to show you. Probably a few of the most requested harnesses to be produced by Chase Bays, and here they are. There are so many features these have to offer, this kind of innovation and flexibility has never been done in our industry. Even though the RB engines are remotely the same harness build, there is about 30 electrical variations. Variants include, coil packs or spark plug wires, coil igniter or integrated igniter, crank/cam sensor & pickups, different ECU’s, injectors, VTC valve, and a few others. We’ve done the research and become very familiar with these variants. So even if you’re not familiar with the electrical components, we are. The harness can plug into, basically anything. We use the same black 16pin connector near the ECU plugs on all of our harnesses. It has all the chassis inputs and outputs you need. The opposite side of this connector is what we adapt to YOUR chassis. When ordering this product on our website it will ask you all the info we need to know via drop down menu’s. This is all the innovation and flexibility mentioned above. Noone else knocks out 20 birds with 1 stone. Chase Bays RB20DET Engine Harness CM1 - $649.99 CM2 - $949.99 CM Mil Spec - $1,349.99 Chase Bays RB25DET Engine Harness CM1 - $649.99 CM2 - $949.99 CM Mil Spec - $1,349.99 Chase Bays RB26DETT Engine Harness CM1 - $699.99 CM2 - $999.99 CM Mil Spec - $1,399.99 PM for the lowest shipping prices. Find out more info on these harnesses by clicking the product names above __________________ IMPROVING PERFORMANCE AND AESTHETICS WHILE SAVING WEIGHT AND SPACE www.ChaseBays.com \| [email protected] \| (205)623-2188 Last edited by Chase Bays; 11-17-2011 at 10:48 AM..

10-21-2011, 02:51 PM	#2
nightsauce Zilvia Addict Join Date: Aug 2008 Location: north NJ Age: 33 Posts: 691 Trader Rating: (16) Feedback Score: 16 reviews	bump for awesome craftsmanship. I used to make harnesses for my previous job, its a very time consuming task. __________________

10-22-2011, 08:58 AM	#3
landins13 Zilvia Addict Join Date: Jan 2008 Location: Baltimore Posts: 986 Trader Rating: (3) Feedback Score: 3 reviews	you guys should make a plug and play harness to plug s13 kouki tails into the usdm 240sx tail light harness. I know the wiring is easy it would just be nice to not have to cut and splice to install them. __________________ NO HANDS IN PANTS!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2011, 09:59 AM	#5
sleeper108 Zilvia Junkie Join Date: Dec 2008 Location: Albuquerque, NM Age: 31 Posts: 511 Trader Rating: (7) Feedback Score: 7 reviews	Do we need to supply harnesses, or are these already premade? I've bee looking at wiring options recently, I decided I wont do mine

10-31-2011, 02:45 PM	#6
drivnovrdaedge Leaky Injector Join Date: Feb 2007 Location: tacoma, wa Age: 33 Posts: 83 Trader Rating: (2) Feedback Score: 2 reviews	Your inbox was full Wondering if u guys could wire up the chase boy 1jzgte harness so that it could connect to the body harness of a 1988 BMW 325is instead of s13 or s14... I have the bmw engine harness I can send along with the 1 jzgte harness Was also wondering if u have pics or the race relay board / fuse box. ..

05-14-2012, 05:14 PM	#9
BlewByYou Zilvia FREAK! Join Date: Jan 2011 Location: 37 58 N 23 43 E Age: 33 Posts: 1,518 Trader Rating: (10) Feedback Score: 10 reviews	Weird but if these are brand new harness, why do you charge an extra $150 for a stock old worn out harness?

05-15-2012, 12:39 PM	#10
chris300zr Zilvia Junkie Join Date: Dec 2005 Location: no dimples. Posts: 573 Trader Rating: (1) Feedback Score: 1 reviews	As much as l would like a $1,350 mil spec harness, I am going to attempt this on my own with the 25 and see how badly I biff it. Bump for CB, there P/S and brake kits are TITS.