Chase Bays S13 SR20DET and S13 KA24DE Engine Harnesses Available Now!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Chase Bays · 01-20-2011, 03:22 PM

Finally complete!

Chase Bays S13 SR20DET Engine Harness

Chase Bays S13 KA24DE Engine Harness

A few things to note on the harnesses...

SR20DET- We have integrated the upper and lower harnesses together to keep things clean and simple. The engine to chassis plugs are long enough to reach where they need to go whether you have stock fusebox location or relocated. We put the Coil Igniter plugs inside the car near the ECU/ECCS. This helps clean up the engine bay of course. MAF or MAP plug, we have a 3 pin deutsch connector coming out at the first junction. The reason we did this is since we all know there is plenty of MAF or MAP styles and locations we let you customize where it is and how it routes. The harness routes similar to the KA harness since they're just about the same thing, under the intake manifold.

KA24DE- We have integrated the upper and lower harnesses together to keep things clean and simple. The engine to chassis plugs are long enough to reach where they need to go whether you have stock fusebox location or relocated. The harness routes underneath the intake manifold instead of over the top, significantly cleaning the motor up.

For KA we would like to offer you the choice of S13 or S14 distributor/coil setup. Still working on that however.

Pictures are kind of blurry, sorry.

S14 motor and chassis harnesses coming ASAP. We also offer a RACE/Stand Alone style harness that has fuel, ignition, starter relays integrated and flying leads for you to connect yourself.

Please ask any questions on this thread instead of PM so we can answer them and throw the Q&A on our website. Thanks for reading!

rootS13 · 01-20-2011, 03:47 PM

Im curious about the price for a S13 ka setup. Thanks.

Chase Bays · 01-20-2011, 03:55 PM

Its posted on the site... $549

genericforumname · 01-20-2011, 04:49 PM

any chance for s14 sr?

k0013 · 01-20-2011, 06:02 PM

if we are doing a VH45 swap into the S14 how would we go about that. would we send you our harness once we sort out what goes where then let you do your magic to clean it up?

zoomswimmer · 01-20-2011, 06:09 PM

On the site, it says you need the stock harness. How much more if you provide it? Also, with the CM1, how much more for the starter and alternator wires?

Pure_JDM · 01-20-2011, 06:22 PM

So fresh and so clean clean.

s13silvia123 · 01-20-2011, 07:55 PM

what is CM1, CM2, or CM Mil Spec?

CM1 harness – The CM1 harness features all new commercial grade, high heat, thin jacketing wire (rated from -49° to +257° F), individually striped for easy identification and all new sensor plug pins. It is covered in full flame retardant nylon sleeving (Operating Temperature Range -103° to 257°F; Melt temp 446°F), and adhesive lined heat shrink. All engine harnesses go directly to the ECU clips, and include all the needed wiring and plugs to make the harness plug and play to your vehicle. The harness is built with aesthetics and functionality in mind. Our harnesses have had a lot of R&D done for proper wiring technique, with all shielded wire used where needed. It features a stealthy look but is also easily accessed, keeping the motor easily worked on. This harness is great for someone looking to clean up their engine bay and replace the used and worn down stock harness.

CM2 harness – The CM2 harness features all the same great aspects and design of the CM1 harness but adds a Mil Spec quick disconnect firewall connector and Raychem connector boot. All CM2 harnesses are designed to mount to the OEM harness entry hole or former AC oval hole (if AC is eliminated) It also includes a complete new custom charge harness (for Alternator and Starter power wires). This harness is perfect for someone who wants the option of very easily removing/disconnecting the engine harness. Not to mention a very shiny firewall connector

CM Mil Spec harness – The Mil Spec harness features; All new sensor plug pins, all new thin jacketing wire (rated from -49° to +257° F), Raychem DR-25 heat shrink (operating temp. -103° to +347° F), adhesive lined heat shrink junctions, Raychem break-outs/junctions where needed, Yellow sensor labeling, and Mil Spec quick disconnect connector w/ Raychem shrink boot. The harnesses go directly to the ECU clips, and include all the needed wiring and plugs to make the harness plug and play to your vehicle. The harness is built with aesthetics and functionality in mind.Our harnesses have had a lot of R&D done for proper wiring technique, with all shielded wire used where needed.

LOUD240 · 01-20-2011, 08:43 PM

please do this for the SOHC ka !!

lewisfk · 01-21-2011, 04:27 AM

I’ve taken care of most of the major stuff for my car except wiring, due to the fact I know nothing about it. Can Chase bay offer a wiring harness for just the bare essential for operating the car. My car is not a daily driver and is no longer registered. I would like a simple harness to control basic functions of the car i.e. turn signals, headlights, wipers, and anything needed to get it on the track, in conjuction with your stand alone harness for the engine.

Chase Bays · 01-21-2011, 05:53 AM

Quote:

Originally Posted by k0013

if we are doing a VH45 swap into the S14 how would we go about that. would we send you our harness once we sort out what goes where then let you do your magic to clean it up?

We would need a motor since we change the routing so much. We are in Birmingham, AL would you be able to bring us a motor?

Quote:

Originally Posted by zoomswimmer

On the site, it says you need the stock harness. How much more if you provide it? Also, with the CM1, how much more for the starter and alternator wires?

We would have to buy one, so whatever it costs us. $100+

The charging harness is included and I forgot to mention that, editing the site as well as adding some pictures of the charge harness.

Quote:

Originally Posted by s13silvia123

what is CM1, CM2, or CM Mil Spec?
.

Its our model names for different options and features. If you read the descriptions you can see what are the specific differences

Quote:

Originally Posted by lewisfk

I’ve taken care of most of the major stuff for my car except wiring, due to the fact I know nothing about it. Can Chase bay offer a wiring harness for just the bare essential for operating the car. My car is not a daily driver and is no longer registered. I would like a simple harness to control basic functions of the car i.e. turn signals, headlights, wipers, and anything needed to get it on the track, in conjuction with your stand alone harness for the engine.

Thats funny you ask!

http://zilvia.net/f/advertiser-annou...harnesses.html

BoostinIX · 01-21-2011, 07:00 AM

/patiently waits for awesome S14 SR Harness :P

Keep up the great work!!!

airhead · 01-21-2011, 09:25 AM

GOOD stuff. Wish i can afford this

Mr.ny 240!! · 01-21-2011, 09:58 AM

those are some fresh harnesses!!

Chase Bays · 01-27-2011, 04:18 PM

Thanks guys!

casten01 · 01-29-2011, 10:39 AM

when do you guys think you'll come out with a S14 SR harness???

revcyanide · 01-29-2011, 01:27 PM

Quote:

Originally Posted by casten01

when do you guys think you'll come out with a S14 SR harness???

this!

length

jonski coupe · 02-02-2011, 12:08 PM

any chance for '96 S14 Zenki with Kouki blacktop motor harness?

Chase Bays · 02-07-2011, 07:03 AM

S14 stuff is coming very soon!

NismoDriverS13 · 02-07-2011, 07:49 AM

dude, that is the sh*t!!! buying one soon, must save now!

Memberofthe600hpkaclub · 02-09-2011, 09:13 AM

Man, need this for a s14 with a ka

Chase Bays · 02-10-2011, 11:44 AM

Thanks guys. S14 stuff releases February 21st

Okinawandrifter87 · 02-10-2011, 11:50 AM

Will the SR harness work on RHD vehicles?

casten01 · 02-10-2011, 12:39 PM

i cant wait!!!!

Chase Bays · 02-14-2011, 02:15 PM

Quote:

Originally Posted by Okinawandrifter87

Will the SR harness work on RHD vehicles?

Yes. From where all the looms come into 1 we've made it about 6 feet. Which is plenty enough to run to the other side. The pictured length is about 4 feet, our production model is 6 feet.

casten01 · 02-26-2011, 08:25 AM

Any update on the S14 harrness? Went searching on ur guys website and on here and havent seen anything yet? You guys posted aboout releasing s14 stuff on the 21s of Feb...?

kingston240 · 03-24-2011, 09:00 AM

I also would like s14 with s14SR harness.

If i supply you with one that is complete, but the wiring has been hacked up... is that a problem?

Flicktitty · 03-24-2011, 10:47 AM

Will you need our wiring harness has a Core? or is this a custom 1 off setup?

im considering one for a 1993 240sx (KA24DE)

also does it mater if its for a auto?

Chase Bays · 03-28-2011, 06:02 PM

Its okay if wiring is hacked we just use plugs so yes we need the core.

S14 is still pending, sorry! Coming asap.

We dont make harnesses for automatic

hardtime21 · 03-29-2011, 11:02 PM

F$&@ Yeah! Finally an S14 KA Harness! Outside of me, how many others been on you guys for this? You don't have to answer! Just keep me posted!

01-20-2011, 03:22 PM	#1
Chase Bays Zilvia Junkie Join Date: Jun 2010 Location: Birmingham, AL Posts: 359 Trader Rating: (1) Feedback Score: 1 reviews	Chase Bays S13 SR20DET and S13 KA24DE Engine Harnesses Available Now!! Finally complete! Chase Bays S13 SR20DET Engine Harness Chase Bays S13 KA24DE Engine Harness A few things to note on the harnesses... SR20DET- We have integrated the upper and lower harnesses together to keep things clean and simple. The engine to chassis plugs are long enough to reach where they need to go whether you have stock fusebox location or relocated. We put the Coil Igniter plugs inside the car near the ECU/ECCS. This helps clean up the engine bay of course. MAF or MAP plug, we have a 3 pin deutsch connector coming out at the first junction. The reason we did this is since we all know there is plenty of MAF or MAP styles and locations we let you customize where it is and how it routes. The harness routes similar to the KA harness since they're just about the same thing, under the intake manifold. KA24DE- We have integrated the upper and lower harnesses together to keep things clean and simple. The engine to chassis plugs are long enough to reach where they need to go whether you have stock fusebox location or relocated. The harness routes underneath the intake manifold instead of over the top, significantly cleaning the motor up. For KA we would like to offer you the choice of S13 or S14 distributor/coil setup. Still working on that however. Pictures are kind of blurry, sorry. S14 motor and chassis harnesses coming ASAP. We also offer a RACE/Stand Alone style harness that has fuel, ignition, starter relays integrated and flying leads for you to connect yourself. Please ask any questions on this thread instead of PM so we can answer them and throw the Q&A on our website. Thanks for reading! __________________ IMPROVING PERFORMANCE AND AESTHETICS WHILE SAVING WEIGHT AND SPACE www.ChaseBays.com \| [email protected] \| (205)623-2188 Last edited by Chase Bays; 05-12-2011 at 04:04 PM..

01-20-2011, 03:55 PM	#3
Chase Bays Zilvia Junkie Join Date: Jun 2010 Location: Birmingham, AL Posts: 359 Trader Rating: (1) Feedback Score: 1 reviews	Its posted on the site... $549 __________________ IMPROVING PERFORMANCE AND AESTHETICS WHILE SAVING WEIGHT AND SPACE www.ChaseBays.com \| [email protected] \| (205)623-2188

01-20-2011, 07:55 PM	#8
s13silvia123 Post Whore! Join Date: May 2006 Location: where waldo is Age: 39 Posts: 3,256 Trader Rating: (16) Feedback Score: 16 reviews	what is CM1, CM2, or CM Mil Spec? CM1 harness – The CM1 harness features all new commercial grade, high heat, thin jacketing wire (rated from -49° to +257° F), individually striped for easy identification and all new sensor plug pins. It is covered in full flame retardant nylon sleeving (Operating Temperature Range -103° to 257°F; Melt temp 446°F), and adhesive lined heat shrink. All engine harnesses go directly to the ECU clips, and include all the needed wiring and plugs to make the harness plug and play to your vehicle. The harness is built with aesthetics and functionality in mind. Our harnesses have had a lot of R&D done for proper wiring technique, with all shielded wire used where needed. It features a stealthy look but is also easily accessed, keeping the motor easily worked on. This harness is great for someone looking to clean up their engine bay and replace the used and worn down stock harness. CM2 harness – The CM2 harness features all the same great aspects and design of the CM1 harness but adds a Mil Spec quick disconnect firewall connector and Raychem connector boot. All CM2 harnesses are designed to mount to the OEM harness entry hole or former AC oval hole (if AC is eliminated) It also includes a complete new custom charge harness (for Alternator and Starter power wires). This harness is perfect for someone who wants the option of very easily removing/disconnecting the engine harness. Not to mention a very shiny firewall connector CM Mil Spec harness – The Mil Spec harness features; All new sensor plug pins, all new thin jacketing wire (rated from -49° to +257° F), Raychem DR-25 heat shrink (operating temp. -103° to +347° F), adhesive lined heat shrink junctions, Raychem break-outs/junctions where needed, Yellow sensor labeling, and Mil Spec quick disconnect connector w/ Raychem shrink boot. The harnesses go directly to the ECU clips, and include all the needed wiring and plugs to make the harness plug and play to your vehicle. The harness is built with aesthetics and functionality in mind.Our harnesses have had a lot of R&D done for proper wiring technique, with all shielded wire used where needed. __________________ 18g and 20g turbo users click on me http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

01-21-2011, 09:25 AM	#13
airhead Nissanaholic! Join Date: Dec 2005 Location: IE/OC Posts: 1,885 Trader Rating: (32) Feedback Score: 32 reviews	GOOD stuff. Wish i can afford this __________________

01-27-2011, 04:18 PM	#15
Chase Bays Zilvia Junkie Join Date: Jun 2010 Location: Birmingham, AL Posts: 359 Trader Rating: (1) Feedback Score: 1 reviews	Thanks guys! __________________ IMPROVING PERFORMANCE AND AESTHETICS WHILE SAVING WEIGHT AND SPACE www.ChaseBays.com \| [email protected] \| (205)623-2188

01-20-2011, 03:47 PM	#2
rootS13 Leaky Injector Join Date: Mar 2010 Location: Miami, FL. Age: 33 Posts: 92 Trader Rating: (15) Feedback Score: 15 reviews	Im curious about the price for a S13 ka setup. Thanks.

01-20-2011, 04:49 PM	#4
genericforumname Zilvia Member Join Date: Sep 2007 Location: Florida, where we prove that shit does in fact run down hill Age: 32 Posts: 229 Trader Rating: (0) Feedback Score: 0 reviews	any chance for s14 sr?

01-20-2011, 06:02 PM	#5
k0013 Zilvia Member Join Date: Apr 2008 Location: Morrow Georgia Age: 40 Posts: 150 Trader Rating: (2) Feedback Score: 2 reviews	if we are doing a VH45 swap into the S14 how would we go about that. would we send you our harness once we sort out what goes where then let you do your magic to clean it up?

01-20-2011, 06:09 PM	#6
zoomswimmer Leaky Injector Join Date: Aug 2006 Location: Salt Lake City, Utah Age: 33 Posts: 133 Trader Rating: (2) Feedback Score: 2 reviews	On the site, it says you need the stock harness. How much more if you provide it? Also, with the CM1, how much more for the starter and alternator wires?

01-20-2011, 06:22 PM	#7
Pure_JDM Zilvia Addict Join Date: Sep 2009 Location: Denham Springs, LA Posts: 814 Trader Rating: (2) Feedback Score: 2 reviews	So fresh and so clean clean.

01-20-2011, 08:43 PM	#9
LOUD240 Nissanaholic! Join Date: Jan 2009 Location: Victorhell DAM ITS HOT Posts: 1,920 Trader Rating: (11) Feedback Score: 11 reviews	please do this for the SOHC ka !!

01-21-2011, 04:27 AM	#10
lewisfk Zilvia FREAK! Join Date: May 2009 Location: North Austin, Texas Age: 40 Posts: 1,162 Trader Rating: (13) Feedback Score: 13 reviews	I’ve taken care of most of the major stuff for my car except wiring, due to the fact I know nothing about it. Can Chase bay offer a wiring harness for just the bare essential for operating the car. My car is not a daily driver and is no longer registered. I would like a simple harness to control basic functions of the car i.e. turn signals, headlights, wipers, and anything needed to get it on the track, in conjuction with your stand alone harness for the engine.

01-21-2011, 07:00 AM	#12
BoostinIX Zilvia Addict Join Date: Feb 2008 Location: Laurel, MD Age: 36 Posts: 815 Trader Rating: (29) Feedback Score: 29 reviews	/patiently waits for awesome S14 SR Harness :P Keep up the great work!!!

01-21-2011, 09:58 AM	#14
Mr.ny 240!! Join Date: Aug 2010 Location: BRONX NY Age: 34 Posts: 29 Trader Rating: (0) Feedback Score: 0 reviews	those are some fresh harnesses!!

01-29-2011, 10:39 AM	#16
casten01 Leaky Injector Join Date: May 2009 Location: San Diego, CA Age: 36 Posts: 91 Trader Rating: (3) Feedback Score: 3 reviews	when do you guys think you'll come out with a S14 SR harness???

02-02-2011, 12:08 PM	#18
jonski coupe Leaky Injector Join Date: Nov 2009 Location: Arizona Posts: 72 Trader Rating: (0) Feedback Score: 0 reviews	any chance for '96 S14 Zenki with Kouki blacktop motor harness?

02-07-2011, 07:03 AM	#19
Chase Bays Zilvia Junkie Join Date: Jun 2010 Location: Birmingham, AL Posts: 359 Trader Rating: (1) Feedback Score: 1 reviews	S14 stuff is coming very soon! __________________ IMPROVING PERFORMANCE AND AESTHETICS WHILE SAVING WEIGHT AND SPACE www.ChaseBays.com \| [email protected] \| (205)623-2188

02-07-2011, 07:49 AM	#20
NismoDriverS13 Zilvia Junkie Join Date: Oct 2009 Location: So-Cal Age: 35 Posts: 506 Trader Rating: (0) Feedback Score: 0 reviews	dude, that is the sh*t!!! buying one soon, must save now!

02-09-2011, 09:13 AM	#21
Memberofthe600hpkaclub Zilvia FREAK! Join Date: Sep 2008 Location: Florida Age: 35 Posts: 1,038 Trader Rating: (17) Feedback Score: 17 reviews	Man, need this for a s14 with a ka

02-10-2011, 11:44 AM	#22
Chase Bays Zilvia Junkie Join Date: Jun 2010 Location: Birmingham, AL Posts: 359 Trader Rating: (1) Feedback Score: 1 reviews	Thanks guys. S14 stuff releases February 21st __________________ IMPROVING PERFORMANCE AND AESTHETICS WHILE SAVING WEIGHT AND SPACE www.ChaseBays.com \| [email protected] \| (205)623-2188

02-10-2011, 11:50 AM	#23
Okinawandrifter87 Post Whore! Join Date: Jun 2006 Location: Sacramento, CA Posts: 3,959 Trader Rating: (22) Feedback Score: 22 reviews	Will the SR harness work on RHD vehicles? __________________ Driftphreak87

02-10-2011, 12:39 PM	#24
casten01 Leaky Injector Join Date: May 2009 Location: San Diego, CA Age: 36 Posts: 91 Trader Rating: (3) Feedback Score: 3 reviews	i cant wait!!!!

02-26-2011, 08:25 AM	#26
casten01 Leaky Injector Join Date: May 2009 Location: San Diego, CA Age: 36 Posts: 91 Trader Rating: (3) Feedback Score: 3 reviews	Any update on the S14 harrness? Went searching on ur guys website and on here and havent seen anything yet? You guys posted aboout releasing s14 stuff on the 21s of Feb...?

03-24-2011, 09:00 AM	#27
kingston240 Zilvia Member Join Date: Sep 2007 Location: Kingston Age: 33 Posts: 252 Trader Rating: (1) Rides Gallery: kingston240 Feedback Score: 1 reviews	I also would like s14 with s14SR harness. If i supply you with one that is complete, but the wiring has been hacked up... is that a problem? __________________ www.facebook.com/HellaFab

03-24-2011, 10:47 AM	#28
Flicktitty Post Whore! Join Date: Apr 2007 Location: Wisconsin Age: 34 Posts: 3,685 Trader Rating: (13) Feedback Score: 13 reviews	Will you need our wiring harness has a Core? or is this a custom 1 off setup? im considering one for a 1993 240sx (KA24DE) also does it mater if its for a auto? __________________ 2JZ-GTE Swapped S13 Coupe - 1994 Supra Turbo

03-28-2011, 06:02 PM	#29
Chase Bays Zilvia Junkie Join Date: Jun 2010 Location: Birmingham, AL Posts: 359 Trader Rating: (1) Feedback Score: 1 reviews	Its okay if wiring is hacked we just use plugs so yes we need the core. S14 is still pending, sorry! Coming asap. We dont make harnesses for automatic __________________ IMPROVING PERFORMANCE AND AESTHETICS WHILE SAVING WEIGHT AND SPACE www.ChaseBays.com \| [email protected] \| (205)623-2188

03-29-2011, 11:02 PM	#30
hardtime21 Zilvia Member Join Date: Mar 2010 Location: M-Town Age: 42 Posts: 249 Trader Rating: (19) Feedback Score: 19 reviews	F$&@ Yeah! Finally an S14 KA Harness! Outside of me, how many others been on you guys for this? You don't have to answer! Just keep me posted!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode