my vq35 s14 swap thread pic hevy - Page 6 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Orly? Yarly. · 06-07-2011, 07:36 PM

Quote:

Originally Posted by irax

OBDI doesn't have a gas tank evap purge valve
or a fuel temp sensor

but the guy who did the vq35de swap into an s13 coupe used a maxima tank and hodgepodged them together

also, obdII tanks are sealed and have a way of monitoring for leaks.

dudewutup · 06-07-2011, 08:06 PM

Quote:

Originally Posted by Orly? Yarly.

also, obdII tanks are sealed and have a way of monitoring for leaks.

Wow, even I didn't know that. I cam across a thread that said that adapter would work so I figure ill try it an post my findings.

dorrifto · 07-02-2011, 03:29 PM

Updates????

Fred Allen Burge · 07-02-2011, 10:19 PM

Quote:

Originally Posted by irax

so guess who has a running vq35de ?

this guy!

Sweet! There's NOTHING like the feeling of getting a motor swap running the first time especially if you've been through a lot getting it to that point, I've been there!

dudewutup · 07-02-2011, 10:41 PM

No updates yet, im in a saving state to get this all finished. Hours at work just arnt quite were they should be to cover the cost of living and my project. I just have to extend my deadline a little.

cassa_bx · 07-08-2011, 09:42 PM

keep at it and dont give up.
we need more people in the club!

Nismo Negro · 07-15-2011, 03:41 PM

This hooptie running yet?! Jk buddy. Know how it is buildin on a budget. Don't forget to holler at ceasar for them oem parts. He has a giant stash of extra stuff to help make that vq swap a little less painfull.

ka-titties · 07-16-2011, 03:38 PM

who might this ceaser fellow be that you speak of?

dudewutup · 07-23-2011, 08:20 AM

Sorry I've been Mia guys, I am getting a little stash of cash to hopefully finish this thing up, im gonna talk to Ceazer once I have some change in my pocket.

First batch of orders:
Fuel return setup :gtr plates because type 2 for fits great.
Ecu flash! I have to hear her run
Radiator and fans
I should be around $300 in there then its just a driveshaft and other odds and ends to make her pritty.

Updates inbound soon......

ka-titties · 07-23-2011, 04:10 PM

who are you guys going to for ECU flashes? and dont say Z Fever.

irax · 07-23-2011, 05:49 PM

Quote:

Originally Posted by ka-titties

who are you guys going to for ECU flashes? and dont say Z Fever.

Any authorized RevUP dealer can do it.

dudewutup · 07-23-2011, 10:52 PM

Quote:

Originally Posted by irax

Any authorized RevUP dealer can do it.

Yep! Im letting national speed handle mine, there based out of north carolina.

Naughty240 · 07-24-2011, 04:45 PM

OP my 6mt 03 G sedan was just totaled so Im gonna drop the motor into a 98 240. Hope you can answer some PMs along the way during my build.

irax · 07-24-2011, 09:32 PM

Quote:

Originally Posted by Naughty240

OP my 6mt 03 G sedan was just totaled so Im gonna drop the motor into a 98 240. Hope you can answer some PMs along the way during my build.

probably should ask me the questions too considering I gave OP all the info he knows ;-)

dudewutup · 07-25-2011, 09:12 AM

Quote:

Originally Posted by irax

probably should ask me the questions too considering I gave OP all the info he knows ;-)

Im not gonna lie irax is the man when it comes to making this swap real, this is my first venture when it comes to a nissan so I don't know all the technical stuff. But I will help out if I can

.

Naughty240 · 07-30-2011, 06:40 PM

Thx guys, right now insurance is gonna fix my G so not sure if I will ever get to this project. I was pumped to start too. Still may part it and get back into the 240. Tough decision.

dudewutup · 08-01-2011, 11:07 AM

Updates:

Sending the ecu off to be flashed tomorrow and the drive shaft will be be made in 2 days stay tuned kiddies.....

dudewutup · 08-20-2011, 12:55 PM

sup guys, just waiting to get my ecu back from national speed...... thought id give y'all a couple of pics to hold you over till then. im basically just getting ready for that first start up.

i used the ebay fuel rail fitting it worked like a charm!

its starting to look more and more like a engine bay by the day

and here is a quick hood clearance shot for the people who were wondering

ej1bullet · 08-22-2011, 08:04 PM

cumming together nice man any up dates ? i got a s13 and im doing the swap as we speak but having ruble with the wiring any advice ??

dudewutup · 08-22-2011, 09:07 PM

No huge updates I called national speed the other day and they said they have been trying to call me (weird) the ecu will be finished and shipped tomorrow till then im just peiceing the car back together.

GregUnit · 08-22-2011, 09:17 PM

Doing a nice job and write up. Im starting my VQ swap in my 98 next month. In for some info.

dudewutup · 08-22-2011, 09:27 PM

Read through this thread well, I've found alot out along the way and can save you a little bread

dudewutup · 09-01-2011, 12:04 PM

finally a huge update!!!

i first startup video? no way.... take it easy on the comments i still have alot to do.

oung · 09-03-2011, 04:04 AM

if i need the wiring harness redone for this swap is there another option besides z fever to do it?

Yellow4g63 · 09-03-2011, 06:53 AM

Yes, I think Mckinney motorsports does them too.

dudewutup · 09-03-2011, 09:01 AM

Why not do it yourself? I did mine its actually alot easier than you'd think

oung · 09-04-2011, 09:05 PM

can you help me out with the wiring dudewutup? am i going to need all the same accessories as z fever told me im going to need? anything additional?

dudewutup · 09-04-2011, 10:48 PM

Quote:

Originally Posted by oung

can you help me out with the wiring dudewutup? am i going to need all the same accessories as z fever told me im going to need? anything additional?

I've got a pretty indepth wrightup on here...... What did zfever say you needed? Ill help you if I can

JDM king240 · 09-05-2011, 12:10 PM

where did u get ur engine from

dudewutup · 09-05-2011, 12:19 PM

I bought it locally off craigslist

07-02-2011, 10:41 PM	#155
dudewutup Zilvia Member Join Date: Mar 2011 Location: mcbee, sc Age: 31 Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	No updates yet, im in a saving state to get this all finished. Hours at work just arnt quite were they should be to cover the cost of living and my project. I just have to extend my deadline a little. __________________ Guess I can't call it a 240....

07-23-2011, 08:20 AM	#159
dudewutup Zilvia Member Join Date: Mar 2011 Location: mcbee, sc Age: 31 Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	Sorry I've been Mia guys, I am getting a little stash of cash to hopefully finish this thing up, im gonna talk to Ceazer once I have some change in my pocket. First batch of orders: Fuel return setup :gtr plates because type 2 for fits great. Ecu flash! I have to hear her run Radiator and fans I should be around $300 in there then its just a driveshaft and other odds and ends to make her pritty. Updates inbound soon...... __________________ Guess I can't call it a 240....

08-01-2011, 11:07 AM	#167
dudewutup Zilvia Member Join Date: Mar 2011 Location: mcbee, sc Age: 31 Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	Updates: Sending the ecu off to be flashed tomorrow and the drive shaft will be be made in 2 days stay tuned kiddies..... __________________ Guess I can't call it a 240....

08-20-2011, 12:55 PM	#168
dudewutup Zilvia Member Join Date: Mar 2011 Location: mcbee, sc Age: 31 Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	sup guys, just waiting to get my ecu back from national speed...... thought id give y'all a couple of pics to hold you over till then. im basically just getting ready for that first start up. i used the ebay fuel rail fitting it worked like a charm! its starting to look more and more like a engine bay by the day and here is a quick hood clearance shot for the people who were wondering __________________ Guess I can't call it a 240....

08-22-2011, 09:07 PM	#170
dudewutup Zilvia Member Join Date: Mar 2011 Location: mcbee, sc Age: 31 Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	No huge updates I called national speed the other day and they said they have been trying to call me (weird) the ecu will be finished and shipped tomorrow till then im just peiceing the car back together. __________________ Guess I can't call it a 240....

07-02-2011, 03:29 PM	#153
dorrifto Leaky Injector Join Date: Nov 2010 Location: Kansas Age: 33 Posts: 131 Trader Rating: (1) Feedback Score: 1 reviews	Updates????

07-08-2011, 09:42 PM	#156
cassa_bx Leaky Injector Join Date: Jan 2009 Location: jersey Age: 46 Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	keep at it and dont give up. we need more people in the club!

07-15-2011, 03:41 PM	#157
Nismo Negro Join Date: Jan 2008 Location: Robins AFB, Ga Age: 36 Posts: 33 Trader Rating: (4) Feedback Score: 4 reviews	This hooptie running yet?! Jk buddy. Know how it is buildin on a budget. Don't forget to holler at ceasar for them oem parts. He has a giant stash of extra stuff to help make that vq swap a little less painfull.

07-16-2011, 03:38 PM	#158
ka-titties Zilvia FREAK! Join Date: Oct 2009 Location: Near that guy you know Posts: 1,561 Trader Rating: (11) Feedback Score: 11 reviews	who might this ceaser fellow be that you speak of?

07-23-2011, 04:10 PM	#160
ka-titties Zilvia FREAK! Join Date: Oct 2009 Location: Near that guy you know Posts: 1,561 Trader Rating: (11) Feedback Score: 11 reviews	who are you guys going to for ECU flashes? and dont say Z Fever.

07-24-2011, 04:45 PM	#163
Naughty240 Zilvia Member Join Date: Jan 2004 Location: Rhode Island Age: 41 Posts: 177 Trader Rating: (0) Rides Gallery: Naughty240 Feedback Score: 0 reviews	OP my 6mt 03 G sedan was just totaled so Im gonna drop the motor into a 98 240. Hope you can answer some PMs along the way during my build.

07-30-2011, 06:40 PM	#166
Naughty240 Zilvia Member Join Date: Jan 2004 Location: Rhode Island Age: 41 Posts: 177 Trader Rating: (0) Rides Gallery: Naughty240 Feedback Score: 0 reviews	Thx guys, right now insurance is gonna fix my G so not sure if I will ever get to this project. I was pumped to start too. Still may part it and get back into the 240. Tough decision.

08-22-2011, 08:04 PM	#169
ej1bullet Join Date: Jul 2011 Location: san jose Age: 31 Posts: 42 Trader Rating: (0) Feedback Score: 0 reviews	cumming together nice man any up dates ? i got a s13 and im doing the swap as we speak but having ruble with the wiring any advice ??

08-22-2011, 09:17 PM	#171
GregUnit Join Date: Dec 2007 Location: Greenville, SC Age: 37 Posts: 32 Trader Rating: (0) Feedback Score: 0 reviews	Doing a nice job and write up. Im starting my VQ swap in my 98 next month. In for some info.

08-22-2011, 09:27 PM	#172
dudewutup Zilvia Member Join Date: Mar 2011 Location: mcbee, sc Age: 31 Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	Read through this thread well, I've found alot out along the way and can save you a little bread __________________ Guess I can't call it a 240....

09-01-2011, 12:04 PM	#173
dudewutup Zilvia Member Join Date: Mar 2011 Location: mcbee, sc Age: 31 Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	finally a huge update!!! i first startup video? no way.... take it easy on the comments i still have alot to do. __________________ Guess I can't call it a 240....

09-03-2011, 04:04 AM	#174
oung Leaky Injector Join Date: Feb 2010 Location: fresno, CA Age: 34 Posts: 90 Trader Rating: (0) Feedback Score: 0 reviews	if i need the wiring harness redone for this swap is there another option besides z fever to do it?

09-03-2011, 06:53 AM	#175
Yellow4g63 Zilvia FREAK! Join Date: Jan 2003 Location: Socal Posts: 1,451 Trader Rating: (5) Feedback Score: 5 reviews	Yes, I think Mckinney motorsports does them too. __________________ 95 240sx RB20 415whp 91 Nx2000 VVL yo

09-03-2011, 09:01 AM	#176
dudewutup Zilvia Member Join Date: Mar 2011 Location: mcbee, sc Age: 31 Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	Why not do it yourself? I did mine its actually alot easier than you'd think __________________ Guess I can't call it a 240....

09-04-2011, 09:05 PM	#177
oung Leaky Injector Join Date: Feb 2010 Location: fresno, CA Age: 34 Posts: 90 Trader Rating: (0) Feedback Score: 0 reviews	can you help me out with the wiring dudewutup? am i going to need all the same accessories as z fever told me im going to need? anything additional?

09-05-2011, 12:10 PM	#179
JDM king240 Zilvia Junkie Join Date: Jan 2011 Location: california CA Posts: 438 Trader Rating: (5) Feedback Score: 5 reviews	where did u get ur engine from

09-05-2011, 12:19 PM	#180
dudewutup Zilvia Member Join Date: Mar 2011 Location: mcbee, sc Age: 31 Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	I bought it locally off craigslist __________________ Guess I can't call it a 240....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode