S13 exhaust mount points? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BrokenSword · 04-22-2013, 10:18 AM

Okay so I'm pretty sure I'm missing a hanger for my exhaust system and its in the mid section where you would jack the car but I'm missing the bolt that should be there. Anybody know the correct size and where its supposed to be? If you can, post a picture.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Mikester · 04-22-2013, 01:50 PM

Look at your left rear jacking point. Just inboard from that, you will see a tab sticking down off the rear subframe with a threaded hole. This is where it and the associated hanger goes.

As far as the size, I have faith that you can figure that one out

BrokenSword · 04-22-2013, 01:52 PM

Quote:

Originally Posted by Mikester

Look at your left rear jacking point. Just inboard from that, you will see a tab sticking down off the rear subframe with a threaded hole. This is where it and the associated hanger goes.

As far as the size, I have faith that you can figure that one out

thanks for the help. also thanks for believing in me for the bolt size. hopefully I dont have to take more than one trip to hardware store lol.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

KoukiMonsta · 04-22-2013, 01:55 PM

Quote:

Originally Posted by BrokenSword

thanks for the help. also thanks for believing in me for the bolt size. hopefully I dont have to take more than one trip to hardware store lol.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

thats a common size bolt...used many places on the chassis

i wanna say m6x... but thats just off my head

DennisC · 04-24-2013, 12:38 AM

The threaded holes are M8x1.25

04-22-2013, 10:18 AM	#1
BrokenSword Join Date: Oct 2011 Location: Nashville, TN Posts: 32 Trader Rating: (1) Feedback Score: 1 reviews	S13 exhaust mount points? Okay so I'm pretty sure I'm missing a hanger for my exhaust system and its in the mid section where you would jack the car but I'm missing the bolt that should be there. Anybody know the correct size and where its supposed to be? If you can, post a picture. Sent from my SAMSUNG-SGH-I727 using Tapatalk 2 __________________

04-22-2013, 01:50 PM	#2
Mikester Nissanaholic! Join Date: Jun 2007 Location: Kathleen, GA Age: 50 Posts: 1,938 Trader Rating: (0) Feedback Score: 0 reviews	Look at your left rear jacking point. Just inboard from that, you will see a tab sticking down off the rear subframe with a threaded hole. This is where it and the associated hanger goes. As far as the size, I have faith that you can figure that one out __________________

04-24-2013, 12:38 AM	#5
DennisC Zilvia Junkie Join Date: Dec 2010 Location: Elk Grove Posts: 581 Trader Rating: (9) Feedback Score: 9 reviews	The threaded holes are M8x1.25 __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode