97 side skirts on a 96 240sx - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

NismOmanS15 · 07-02-2002, 01:05 AM

alright i got some 97 240sx stock side skirts from a friend and i have a 96 that doesnt come with the side skirts of course. but the 97 has a rail that the side skirt bolt on to mine doesnt so how do i put these on or can i even do this. i had the idea of just shaving the screw holders cause there raised on the inside of the side skirt and then just pateing it on there or some thing . im open to any ideas. thanks guys.

Nismos14 · 07-02-2002, 12:49 PM

i used the screw holders and drilled screws right into the underbody to get mine on, you just have to be careful because if u dont get the right fit they have a tendency to come loose

gmgs14 · 07-02-2002, 03:16 PM

I drilled pilot holes on the underside of my 95 where the skirts bolt on and also used some twosided tape along the edge.  Worked just fine, and they look great.

07-02-2002, 12:49 PM	#2
Nismos14 Zilvia FREAK! Join Date: Jun 2001 Location: New Jersey Age: 40 Posts: 1,213 Trader Rating: (0) Feedback Score: 0 reviews	i used the screw holders and drilled screws right into the underbody to get mine on, you just have to be careful because if u dont get the right fit they have a tendency to come loose __________________ '97 maxima 5-Spd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-02-2002, 01:05 AM	#1
NismOmanS15 Join Date: Apr 2002 Posts: 35 Trader Rating: (0) Feedback Score: 0 reviews	alright i got some 97 240sx stock side skirts from a friend and i have a 96 that doesnt come with the side skirts of course. but the 97 has a rail that the side skirt bolt on to mine doesnt so how do i put these on or can i even do this. i had the idea of just shaving the screw holders cause there raised on the inside of the side skirt and then just pateing it on there or some thing . im open to any ideas. thanks guys.

07-02-2002, 03:16 PM	#3
gmgs14 Zilvia Member Join Date: Jan 2002 Location: Grand Rapids, MI Posts: 222 Trader Rating: (0) Feedback Score: 0 reviews	I drilled pilot holes on the underside of my 95 where the skirts bolt on and also used some twosided tape along the edge.  Worked just fine, and they look great.