TomShanK

I bought a DCC off of a user on here a while back and it is coming the time in my swap to begin considering everything I have to wire up.

From what I have read using articles on NICOclub and other various sites, I need things such as sun sensors and many other things. However, I'm not exactly sure what I have, nor what I'm going to be connecting it to.

Does anyone have a more comprehensive DIY for hooking up the DCC and a complete list of sensors I will need? I plan on having fully functional A/C, Heat, etc.

Mikester

You need the control unit, blower motor resistor, the tube with the cabin temp sensor in it, the ambient air temp sensor, sunload sensor, blend door actuator & linkage, and DCC sub harness.

The info is out there; and there are GREAT writeups with pics to help on Nico and here too IIRC. Search again. I am not the sharpest knife in the drawer and had no trouble with this mod.

__________________

TomShanK

Can you by chance tell me what I'm missing here from my picture?

I'm really not sure exactly what I have as far as what is needed. I basically bought this one day with the "this would look cooler than my analog setup". I've only done about 30 minutes of research on the install and wiring, but I will devote a little more time, especially if you're saying you found some nice writeups.

Thank you for your quick response!

project7x

YouTube. There is a full tutorial. Very helpful. Mine works minty.

TomShanK

Here are the YouTube links for anyone who searches Zilvia and wants a quick link:


Thank you guys!

Part 1:
https://www.youtube.com/watch?v=2z5_PxGAiIU

Part 2:
https://www.youtube.com/watch?v=6l-I17kg0Sk

Part 3:
https://www.youtube.com/watch?v=KVoftdGan9Q

I have not done it yet, but it's nice to know there is a tutorial out there for me.

90240sx07

^^^ used the youtube vids took about a hr for me with testing and everything and also deleted alot of wires miss mine will have another one someday when i get a front clip