Adjusting Idle - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nrmskate · 01-24-2009, 04:33 PM

Well, I have a KA24E, and it's idling at about 500rpm

I have tried the Idle Adjustment Screw.

Only other suggestion is the throttle cable.

RPS13-604 · 01-24-2009, 04:43 PM

i do not understand your post haha

nrmskate · 01-24-2009, 05:30 PM

I want to up the idle to about 1000-1200rpm, but the screw is not working.

Ive turned it clockwise all the way and vis versa while the car is running and no change.

And I was suggesting the only other way to adjust the idle would be through the throttle cable?

lazysk8er2 · 01-24-2009, 06:45 PM

you probably have something wrong with your sensors. maf maybe?

windshieldwiper · 01-25-2009, 04:35 PM

Quote:

Originally Posted by nrmskate

Well, I have a KA24E, and it's idling at about 500rpm

I have tried the Idle Adjustment Screw.

Only other suggestion is the throttle cable.

clean your throttle

SochBAT · 01-25-2009, 04:42 PM

Spray some carb cleaner into your intake piping.

Theres an adjustment bolt in the back, behind the intake manifold. Its behind a yellowish triangle support with a hole bored through it.

nrmskate · 01-25-2009, 05:25 PM

I know, thats what im saying, Ive tried that screw.
Nothing.

And isn't it bad to spray carb cleaner? I thought it was Intake cleaner?

duffman1278 · 01-25-2009, 05:30 PM

No theres nothing wrong with spraying carb cleaner. To adjust your idle though I believe you have to disconnect the TPS or adjust it with the engine off then turn it on and see.

waynehead05 · 01-25-2009, 10:06 PM

^ That's what I've always heard.

supreme_1 · 01-26-2009, 12:00 AM

maybe your iac was removed and adjusted wrong. did you check your computers diagnosic screw? i know of an instance where it wasnt put back to its original position and it idled wrong. btw 1000-1200 at idle is to high

d3m14n · 01-26-2009, 12:03 AM

idle should should be at roughly 650-750rpms

01-24-2009, 04:33 PM	#1
nrmskate Zilvia Addict Join Date: May 2008 Location: IL Posts: 968 Trader Rating: (9) Feedback Score: 9 reviews	Adjusting Idle Well, I have a KA24E, and it's idling at about 500rpm I have tried the Idle Adjustment Screw. Only other suggestion is the throttle cable.

01-25-2009, 10:06 PM	#9
waynehead05 Zilvia Junkie Join Date: May 2005 Location: Dallas Age: 34 Posts: 466 Trader Rating: (1) Feedback Score: 1 reviews	^ That's what I've always heard. __________________ Who in their right mind would want to lead this nation of Me-First Right-Now Do Nothings??

01-26-2009, 12:03 AM	#11
d3m14n Leaky Injector Join Date: Oct 2007 Location: Boston, MA Posts: 126 Trader Rating: (2) Feedback Score: 2 reviews	idle should should be at roughly 650-750rpms __________________ http://www.d3m14n.com/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-24-2009, 04:43 PM	#2
RPS13-604 Zilvia Junkie Join Date: May 2008 Location: Vancouver BC Age: 31 Posts: 386 Trader Rating: (0) Feedback Score: 0 reviews	i do not understand your post haha

01-24-2009, 05:30 PM	#3
nrmskate Zilvia Addict Join Date: May 2008 Location: IL Posts: 968 Trader Rating: (9) Feedback Score: 9 reviews	I want to up the idle to about 1000-1200rpm, but the screw is not working. Ive turned it clockwise all the way and vis versa while the car is running and no change. And I was suggesting the only other way to adjust the idle would be through the throttle cable?

01-25-2009, 04:42 PM	#6
SochBAT Post Whore! Join Date: Dec 2004 Location: Abilene, TX Age: 35 Posts: 6,428 Trader Rating: (9) Rides Gallery: SochBAT Feedback Score: 9 reviews	Spray some carb cleaner into your intake piping. Theres an adjustment bolt in the back, behind the intake manifold. Its behind a yellowish triangle support with a hole bored through it.

01-25-2009, 05:25 PM	#7
nrmskate Zilvia Addict Join Date: May 2008 Location: IL Posts: 968 Trader Rating: (9) Feedback Score: 9 reviews	I know, thats what im saying, Ive tried that screw. Nothing. And isn't it bad to spray carb cleaner? I thought it was Intake cleaner?

01-25-2009, 05:30 PM	#8
duffman1278 Post Whore! Join Date: Apr 2007 Location: Covina Age: 33 Posts: 2,844 Trader Rating: (8) Rides Gallery: duffman1278 Feedback Score: 8 reviews	No theres nothing wrong with spraying carb cleaner. To adjust your idle though I believe you have to disconnect the TPS or adjust it with the engine off then turn it on and see.

01-26-2009, 12:00 AM	#10
supreme_1 Zilvia Addict Join Date: Sep 2007 Location: hawaii Posts: 612 Trader Rating: (12) Feedback Score: 12 reviews	maybe your iac was removed and adjusted wrong. did you check your computers diagnosic screw? i know of an instance where it wasnt put back to its original position and it idled wrong. btw 1000-1200 at idle is to high