rv_zenki

Hi,

So my S14 has some rust on the floor pan and the very underside of the rockers. I want to find a shell to cut up but finding a clean s14 shell is proving difficult. Would I be able to use an S13 shell? Could I make the rockers work? They would be behind a side skirt and on the very bottom so not totally visible.

Thanks

S14rebuild

s14=s14. s13=s13


Unless ur good at fab n make what u need out of sheet metal...

burnsauto

don't cut up a clean shell to fix your rusty one. Just take it to a body shop and have the rust fixed. You live in MI, so it's just going to come back one day. Play the hand you've been dealt, lol.

__________________

rv_zenki

I've had the car since 1996. Id cut up 10 shells to save this one. I dont care

collegekid

There's like a million dudes parting out cars, I'm sure somebody will sell you a cut of whatever you need.

LoSt180

I could never find a clean shell, so had to make my own floor pans to save my S14. The drainplug thing behind the seat collected water and ate up the pans on both sides.

S14rebuild

Fix the water leak and you wont have to worry bout that

LoSt180

It's a design flaw. There's a hole from the factory assembly process and a metal piece is glued on. Water seeps in and since it's under the sound deadening it just sits and eats away at the metal.

inopsey

is that a sunroof car? where is the water seeping in from ??

Kingtal0n

Yeah when I get a car now first thing I do is rip out the carpet, degreaser and wash all that floor board... gunk... out. Scrub it really good so its just the pseudo sticky sound deadener left in there. Fix any rust etc...

And then paint it with some good ol' rustoleum oil based paint. The paint sort of eats up any leftover oil residues and sort of soaks into the sound deadener, its pretty slick. And it keeps water off and out of the sound deadener and seals up any leftover metal exposed.

Friend gave me the idea, we did his car first and then I was like omg im doing that from now on

LoSt180

Water came up from the bottom. Since it was under the sound deadening, the carpet was never wet. Only noticed when I was under the car one day and started poking at it.

Here's where the factory hole is. There's only a silver stick on thing sealing it up.

S14rebuild

owned 3 s14s never had water comen in there issue..huh

inopsey

so i took back the carpet and peeled back the sound material and i saw the metal silver seal behind the seat mount, no rust there. i further peeled back the deadening and found an actual hole only sealed by the sound deadening (close to the transmission tunnel). this is where i got some surface ( i hope) rust started i dont see the same hole in your pics. thanks for pointing out this issue would of never found it until too late and a big rust job



WTF nissan

inopsey

pull your carpet and sound deadening back you might be in for a surprise.