PR71C Syncro rebuild kit - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Club33Enthusiast · 09-25-2020, 05:08 PM

Sup guys.
So im in somewhat of a situation ATM and basically it is my transmission.
I turned my gearbox in for maintenance and i had originally purchased a FS5W71C rebuild kit for it.
It didn't work, the internal parts are a bit different.
So basically i am trying to figure out what you guys are using for transmission rebuilds and if you have sources or part numbers.
My transmission is a PR71C with a #2 stamped on the case..

Club33Enthusiast · 10-10-2020, 06:44 PM

Transmission is now complete, the actual bearings work but the second and third gear synchro are different(Gearbox#2). I believe the others worked fine, all i had left over was three synchros and two were from 2nd&3rd gear. The third i am not sure about.

09-25-2020, 05:08 PM	#1
Club33Enthusiast Join Date: Apr 2020 Location: Texas Posts: 13 Trader Rating: (0) Feedback Score: 0 reviews	PR71C Syncro rebuild kit Sup guys. So im in somewhat of a situation ATM and basically it is my transmission. I turned my gearbox in for maintenance and i had originally purchased a FS5W71C rebuild kit for it. It didn't work, the internal parts are a bit different. So basically i am trying to figure out what you guys are using for transmission rebuilds and if you have sources or part numbers. My transmission is a PR71C with a #2 stamped on the case..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-10-2020, 06:44 PM	#2
Club33Enthusiast Join Date: Apr 2020 Location: Texas Posts: 13 Trader Rating: (0) Feedback Score: 0 reviews	Transmission is now complete, the actual bearings work but the second and third gear synchro are different(Gearbox#2). I believe the others worked fine, all i had left over was three synchros and two were from 2nd&3rd gear. The third i am not sure about.