Therealdapnyc

Does SR and KA head gasket match up !?


Sent from dap using Tapatalk

bmxer882x

Is this a real question?
Of course they do.
Them being a 2.0L and a 2.4L makes no difference. Neither does the fact that the blocks aren't very similar.
Go do the change now

Akop

I hope this is a joke

Therealdapnyc

I was told two different things needed done varification


Sent from dap using Tapatalk

Therealdapnyc

@bmxer882x thanks for the help


Sent from dap using Tapatalk

bmxer882x

I was kidding. Thought my sarcasm was pretty obvious. No it won't work.

cotbu

It's OK in situations like this, to mention who told you such BS!
There are engines with the same code where the gaskets do interchange s13sr and s14sr you can use the s14 gasket on the S13sr with no problems.

__________________

LoverTechnologies "Half Broken Things!"

brndck

Jeezus this is why we can't have nice things.

Hey I've got a 1uzfe and an ls1. Since they're both v8 do you think I can put the LS cam in the toyota engine???

__________________

http://outslidersandsmokeproduce.blogspot.com/

DJ 21o3

You guys...look at the OP's location. 'Nuf said.

BoostSlideWayz

Alright besides the fact this question is completely senseless im going to answer just because i feel like it may do you good.

No..... it is not compatible.. Ka and SR are entirely different motors.. the only thing they share is the fact they are both made by nissan.


Please dont work on your own car.

__________________
1994 toyota supra...... n-a D=
1992 nissan 240sx KA24E-T fully Built =D

rebornS14

the only thing i can think of that is compatible with both engines is the knock sensor and oil pressure sender. injectors are the same fitment, different cc. dont think anything else besides that is interchangeable on the block.

__________________

Kingtal0n

the knock sensor is not interchangable. If someone finds out that the part numbers are the same... well.. I should be very surprised and... interested.

__________________
5.3/4l80e/turbo 240sx playthrough:
https://tinyurl.com/turbo240

eek

Ok, so since the sr20 is a 2.0 and its made in Japan can't i use a B20 head gasket from Honda? I mean its made in Japan and its also a 2.0. Also make sure you get some more headlight fluid, seems to me yours is VERY LOW!

Boostd2

Google is a wonderful tool of modern technology, Use it to your advantage and educate yourself! It's not just a homepage you know.

onehundredoctane

humilde_s13

Floridians always make theirselves look stupid wonder why?

__________________
I will give you my pistol ammo at the speed of light towards your doom

GreenApple

Lmfao.. Different displacement, different block, and especially different piston bore size. Ka are 89mm sr are 86 I believe. I'm ka-t so I'm not an expert on SR. Off the top of my head the only thing the same of the two is the thermostat. You really should had looked at an actual head gasket and compare the two side side by side and read the specs before making your self look like a fool. Kids these days, expects to be spoon fed.