Na Ka Faq - Page 9 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ryan hagen · 09-07-2010, 06:24 PM

saw it at crandon, dosnt sound like any other ka i have ever heard, they said 10k rpm and 2.5L dry sump, 280-300hp n/a

ryan hagen · 09-07-2010, 06:30 PM

this one threw a rod, there were 3 or 4 other trucks running ka's and no one knew much about what was inside, all i know is they are the truck engines with a gforce behind them, and some crazy starters, the fly wheels are about 8-10" around and have a 3 plate mini disc set up(saw one on the ground)

fckillerbee · 09-07-2010, 06:43 PM

^^^ any video clip of this in action?

ryan hagen · 09-07-2010, 08:25 PM

im sure you can find video, i didnt take any. they are in TRAXXIS TORC prolight trucks. nissan frontiers run ka24de, toyota runs some inline 4, there were several and some i didnt reconize. fords ran 4 cylinder or restricted 302's look for Art schmidt and Chad Hord were big into them a couple years ago like 2007 they ran for nissan motorsports

Machine Specifications
Weight 2800lbs
Wheel Travel 12inches front / 14inches rear
Tires Kumho D.O.T. 32 X 11.50 (Art Schmitt is GY)
Wheels American Racing 15 X 7 with bead locks
Transmission G-force 5-speed racing manual trans
Rear End Fabricated housing with 9 inch ring gear
Engine Nissan KA24 (2.5L), 4 valve, approx. 310 bhp, 275 ft-lb.
torque (Weber twin carburetors)

NISSAN MOTORSPORTS | CORR

these have around forever we have been trying to get info out of them for years but they wont talk much of the engines

http://www.off-roadweb.com/features/...er/photos.html

smbonn2005 · 09-28-2010, 08:11 AM

Hey if any of you need high comp pistons I have a BNIB set of JE's 11:1 .20 over

project-D180 · 09-29-2010, 10:20 AM

i take it your going turbo?

pink godzila · 01-03-2011, 10:38 AM

97 KA manual ECU number J6? or whatelse?

project-D180 · 01-13-2011, 09:11 AM

whats up guys?anyone with a n/a build/setups?

gsk8087 · 04-06-2011, 10:35 PM

hey everyone i jus bought a 240sx 5speed shell it has a lower harness but i need the upper harness and i found on for it but the problem is that its a automatic harness and ppl told me that it will not work unless i mod it a lil. has anyone out there modded a auto harness to a 5 speed harness? thanxx

project-D180 · 04-10-2011, 05:44 PM

u have to cross a couple of wires so it can read its in park/n

ryan hagen · 05-16-2011, 10:51 PM

a friend of mine got his hands on a short block from a offroad truck, was dry sump, and based off the actual truck engine, JE pistons, we are tearing down to check rod length

KA240SX808 · 06-01-2011, 09:47 PM

There probably the same 171mm Rods they use in the GT3 KA's.

nate1 · 07-14-2011, 12:46 PM

Quote:

whats up guys?anyone with a n/a build/setups?

whats up D havnt talk to u in a min. i still got my na "build" that im working on. 93 coup lots of bolt ons, did the body work so that took money away from the motor plus my sr is a money pit but all i need is my cams, nistune, and drive shaft and ill be on the dyno. i think i can hit 200 crank after that. ill post the dyno chart after its all done. did u end up selling your car?

project-D180 · 07-17-2011, 08:16 AM

im workin on body work now on my car..u ever try r.s.ethanpy he's nice wit rom tuning but i kno your gonna tune ya own car..what kinda of drie shaft r u running??i got a alum i ben running for a couple years already.no i still got my car no one picked it up yet..couple of people came n looked at it but they flaked..

project-D180 · 07-17-2011, 08:21 AM

plannig on swappin out the crank next year for a fully countered one n maybe over bore it more to .50 but we'll see..i got to get some bigger cams n bolt ons..let me kno if u run across any spare ka motors n stock cams

nate1 · 07-19-2011, 08:41 AM

im not tuning shit lol, that will be done down at DMS performance. i dont like send away tunes, just not my thing. i have the stock drive shaft in there now i want to get a drive shaft shop alum one. i keep my eye open for a motor if u still need some stock cams u can have mine in a few months. i got a oil pressure light on yesterday, so i hope its just the sending unit or some thing dumb i havent got around to looking at it yet.

wacko2 · 07-30-2011, 06:52 PM

im planing goin ka na power on 240, i want least pull 200,

nate1 · 08-23-2011, 10:41 PM

u wont, not with out a fully built motor, it has been done just not cheap im going to spray mine that will make over 200 wheel

NoPistons! · 09-04-2011, 01:19 PM

nvm. msglength. edit.

ryan hagen · 09-28-2011, 08:14 PM

JE Pistons 535523

Carrillo Rods: 19168

project-D180 · 09-28-2011, 10:38 PM

niice. are they custom or are they new from je?

NoPistons! · 09-29-2011, 02:57 AM

Look at the domes on those mofos. Wonder what the cam specs were on said motor.

ryan hagen · 09-29-2011, 07:17 AM

the dates scribed on stuff leads me to believe it was built in 2006, all we got was the short block, its all plugged off for dry sump, but the guy who had this kept all that stuff. he told my friend that got the engine that the cams siezed up because it had a oiling issue, which the main bearing were ok but the rod bearing were destroyed in this thing. thie psitons are soooo much lighter than stock, and the rods seem to be also. the guy also told him the red line was at 9k, and their newer engine had belt drive timing set ups.

ryan hagen · 09-29-2011, 11:29 AM

reply from JE:
"The cylinder bore size listed is 3.522. This was a Nissan Motorsports piston so they do not list any other specs on the stroke, rod, or compression.

We also didnt supply a ring for these pistons. Nissan Motorsports outsourced their own rings. "

lands it at 89.45 or 89.5mm

NoPistons! · 09-29-2011, 01:13 PM

What about the crank? Full balance? Stroked?

Cool stuff and good score.

ryan hagen · 09-29-2011, 01:18 PM

truck crank, its been rebalanced, kind of polished, and it has allen plugs in ever journal, so it had some oil passage work done. but its not full balanced, looks like a car crank, but the flywheel mount is thicker. ill take a couple pics tonight

ryan hagen · 09-29-2011, 09:33 PM

the closer brown crank is a s13, the silver shiney one is the race truck crank

project-D180 · 11-06-2011, 11:09 PM

anyone else with a n/a build,dyno #'s

nate1 · 11-09-2011, 01:29 PM

mine will be up very soon just needs to be broke in, had to bail on my idea of doing all bolt ons cuz the oil pump went, so i rebuilt it with shoc pistons dyno in a few weeks after my nistune gets here and it is broke in.

project-D180 · 11-09-2011, 06:23 PM

whAT cams??stock

09-07-2010, 08:25 PM	#244
ryan hagen Zilvia FREAK! Join Date: Jan 2003 Location: rhinelander wisconsin Age: 38 Posts: 1,465 Trader Rating: (8) Feedback Score: 8 reviews	im sure you can find video, i didnt take any. they are in TRAXXIS TORC prolight trucks. nissan frontiers run ka24de, toyota runs some inline 4, there were several and some i didnt reconize. fords ran 4 cylinder or restricted 302's look for Art schmidt and Chad Hord were big into them a couple years ago like 2007 they ran for nissan motorsports Machine Specifications Weight 2800lbs Wheel Travel 12inches front / 14inches rear Tires Kumho D.O.T. 32 X 11.50 (Art Schmitt is GY) Wheels American Racing 15 X 7 with bead locks Transmission G-force 5-speed racing manual trans Rear End Fabricated housing with 9 inch ring gear Engine Nissan KA24 (2.5L), 4 valve, approx. 310 bhp, 275 ft-lb. torque (Weber twin carburetors) NISSAN MOTORSPORTS \| CORR these have around forever we have been trying to get info out of them for years but they wont talk much of the engines http://www.off-roadweb.com/features/...er/photos.html __________________ 1990 hatch ka24de gt2871r

05-16-2011, 10:51 PM	#251
ryan hagen Zilvia FREAK! Join Date: Jan 2003 Location: rhinelander wisconsin Age: 38 Posts: 1,465 Trader Rating: (8) Feedback Score: 8 reviews	a friend of mine got his hands on a short block from a offroad truck, was dry sump, and based off the actual truck engine, JE pistons, we are tearing down to check rod length __________________ 1990 hatch ka24de gt2871r Last edited by ryan hagen; 09-28-2011 at 08:17 PM..

09-04-2011, 01:19 PM	#259
NoPistons! Zilvia Junkie Join Date: Jan 2009 Location: Carolina Posts: 548 Trader Rating: (1) Feedback Score: 1 reviews	nvm. msglength. edit. __________________ Just another broke ass drifter Last edited by NoPistons!; 09-29-2011 at 02:58 AM..

09-28-2011, 08:14 PM	#260
ryan hagen Zilvia FREAK! Join Date: Jan 2003 Location: rhinelander wisconsin Age: 38 Posts: 1,465 Trader Rating: (8) Feedback Score: 8 reviews	JE Pistons 535523 Carrillo Rods: 19168 __________________ 1990 hatch ka24de gt2871r

09-29-2011, 02:57 AM	#262
NoPistons! Zilvia Junkie Join Date: Jan 2009 Location: Carolina Posts: 548 Trader Rating: (1) Feedback Score: 1 reviews	Look at the domes on those mofos. Wonder what the cam specs were on said motor. __________________ Just another broke ass drifter

09-07-2010, 06:43 PM	#243
fckillerbee Post Whore! Join Date: Nov 2007 Location: Southern California Age: 36 Posts: 4,266 Trader Rating: (5) Feedback Score: 5 reviews	^^^ any video clip of this in action?

09-28-2010, 08:11 AM	#245
smbonn2005 Zilvia Junkie Join Date: Sep 2009 Location: Bellingham, MA Age: 30 Posts: 315 Trader Rating: (9) Feedback Score: 9 reviews	Hey if any of you need high comp pistons I have a BNIB set of JE's 11:1 .20 over

09-29-2010, 10:20 AM	#246
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	i take it your going turbo?

01-03-2011, 10:38 AM	#247
pink godzila Post Whore! Join Date: Dec 2007 Location: SoCal / Japan Tokyo Posts: 4,179 Trader Rating: (226) Feedback Score: 226 reviews	97 KA manual ECU number J6? or whatelse?

01-13-2011, 09:11 AM	#248
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	whats up guys?anyone with a n/a build/setups?

04-06-2011, 10:35 PM	#249
gsk8087 Join Date: Mar 2011 Location: maryland Age: 34 Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	hey everyone i jus bought a 240sx 5speed shell it has a lower harness but i need the upper harness and i found on for it but the problem is that its a automatic harness and ppl told me that it will not work unless i mod it a lil. has anyone out there modded a auto harness to a 5 speed harness? thanxx

04-10-2011, 05:44 PM	#250
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	u have to cross a couple of wires so it can read its in park/n

07-17-2011, 08:16 AM	#254
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	im workin on body work now on my car..u ever try r.s.ethanpy he's nice wit rom tuning but i kno your gonna tune ya own car..what kinda of drie shaft r u running??i got a alum i ben running for a couple years already.no i still got my car no one picked it up yet..couple of people came n looked at it but they flaked..

07-17-2011, 08:21 AM	#255
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	plannig on swappin out the crank next year for a fully countered one n maybe over bore it more to .50 but we'll see..i got to get some bigger cams n bolt ons..let me kno if u run across any spare ka motors n stock cams

07-19-2011, 08:41 AM	#256
nate1 Zilvia Member Join Date: Jan 2010 Location: harrisburg/philly Age: 35 Posts: 204 Trader Rating: (7) Feedback Score: 7 reviews	im not tuning shit lol, that will be done down at DMS performance. i dont like send away tunes, just not my thing. i have the stock drive shaft in there now i want to get a drive shaft shop alum one. i keep my eye open for a motor if u still need some stock cams u can have mine in a few months. i got a oil pressure light on yesterday, so i hope its just the sending unit or some thing dumb i havent got around to looking at it yet.

07-30-2011, 06:52 PM	#257
wacko2 Zilvia FREAK! Join Date: Jul 2007 Location: walnut Posts: 1,071 Trader Rating: (5) Feedback Score: 5 reviews	im planing goin ka na power on 240, i want least pull 200,

08-23-2011, 10:41 PM	#258
nate1 Zilvia Member Join Date: Jan 2010 Location: harrisburg/philly Age: 35 Posts: 204 Trader Rating: (7) Feedback Score: 7 reviews	u wont, not with out a fully built motor, it has been done just not cheap im going to spray mine that will make over 200 wheel

09-28-2011, 10:38 PM	#261
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	niice. are they custom or are they new from je?

09-29-2011, 07:17 AM	#263
ryan hagen Zilvia FREAK! Join Date: Jan 2003 Location: rhinelander wisconsin Age: 38 Posts: 1,465 Trader Rating: (8) Feedback Score: 8 reviews	the dates scribed on stuff leads me to believe it was built in 2006, all we got was the short block, its all plugged off for dry sump, but the guy who had this kept all that stuff. he told my friend that got the engine that the cams siezed up because it had a oiling issue, which the main bearing were ok but the rod bearing were destroyed in this thing. thie psitons are soooo much lighter than stock, and the rods seem to be also. the guy also told him the red line was at 9k, and their newer engine had belt drive timing set ups. __________________ 1990 hatch ka24de gt2871r

09-29-2011, 11:29 AM	#264
ryan hagen Zilvia FREAK! Join Date: Jan 2003 Location: rhinelander wisconsin Age: 38 Posts: 1,465 Trader Rating: (8) Feedback Score: 8 reviews	reply from JE: "The cylinder bore size listed is 3.522. This was a Nissan Motorsports piston so they do not list any other specs on the stroke, rod, or compression. We also didnt supply a ring for these pistons. Nissan Motorsports outsourced their own rings. " lands it at 89.45 or 89.5mm __________________ 1990 hatch ka24de gt2871r Last edited by ryan hagen; 09-29-2011 at 01:19 PM..

09-29-2011, 01:13 PM	#265
NoPistons! Zilvia Junkie Join Date: Jan 2009 Location: Carolina Posts: 548 Trader Rating: (1) Feedback Score: 1 reviews	What about the crank? Full balance? Stroked? Cool stuff and good score. __________________ Just another broke ass drifter

09-29-2011, 01:18 PM	#266
ryan hagen Zilvia FREAK! Join Date: Jan 2003 Location: rhinelander wisconsin Age: 38 Posts: 1,465 Trader Rating: (8) Feedback Score: 8 reviews	truck crank, its been rebalanced, kind of polished, and it has allen plugs in ever journal, so it had some oil passage work done. but its not full balanced, looks like a car crank, but the flywheel mount is thicker. ill take a couple pics tonight __________________ 1990 hatch ka24de gt2871r

09-29-2011, 09:33 PM	#267
ryan hagen Zilvia FREAK! Join Date: Jan 2003 Location: rhinelander wisconsin Age: 38 Posts: 1,465 Trader Rating: (8) Feedback Score: 8 reviews	the closer brown crank is a s13, the silver shiney one is the race truck crank __________________ 1990 hatch ka24de gt2871r

11-06-2011, 11:09 PM	#268
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	anyone else with a n/a build,dyno #'s

11-09-2011, 01:29 PM	#269
nate1 Zilvia Member Join Date: Jan 2010 Location: harrisburg/philly Age: 35 Posts: 204 Trader Rating: (7) Feedback Score: 7 reviews	mine will be up very soon just needs to be broke in, had to bail on my idea of doing all bolt ons cuz the oil pump went, so i rebuilt it with shoc pistons dyno in a few weeks after my nistune gets here and it is broke in.

11-09-2011, 06:23 PM	#270
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	whAT cams??stock

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode