ronnieboy19

So i got everything reconnected using wiringspecialtie for the s13 to rb25det s2 ,today went to try starting it for the first time, it cranks but doesn't turn over.
i thought maybe that the fuel pump wasn't getting enough voltage since its a walbro 255 , so i ended up hard wiring the pump with painless performance fuel pump relay kit and still no turn over. I checked my grounds and all but so lost now and losing patience so if anyone that has experience with this problem and could give some answers or tips that be great ,thanks

feito

cranking and turning over's the same thing.
eta: you gotta start with the basics

__________________
Tuners are big bullies

nisileighty

Is your ECU getting power? My SR has the same problem when I first did the swap because my ecu was damaged, but not enough power at the ECU can cause the same problem


Pull the ecu covers off and check for burn marks/water damage and use a multimeter to see if it’s getting enough power.

ronnieboy19

Sweet ill check it out soon thanks a ton